Cisco 300-410 Practice Exams
Last updated on Nov 16,2026- Exam Code: 300-410
- Exam Name: Implementing Cisco Enterprise Advanced Routing and Services (ENARSI)
- Certification Provider: Cisco
- Latest update: Nov 16,2026
Which component of MPLS VPNs is used to extend the IP address so that an engineer is able to identify to which VPN it belongs?
- A . VPNv4 address family
- B . RD
- C . RT
- D . LDP
B
Explanation:

Which mechanism provides traffic segmentation within a DMVPN network?
- A . RSVP
- B . BGP
- C . MPLS
- D . iPsec
C
Explanation:
To use the DMPVN C Traffic Segmentation Within DMVPN feature you must configure Multiprotocol Label Switching (MPLS) by using the mpls ip command.
Reference: https://www.cisco.com/c/en/us/td/docs/ios-xml/ios/sec_conn_dmvpn/configuration/xe-16/sec-conn-dmvpn-xe-16-book/sec-conn-dmvpn-dmvpn.html
A network administrator opens a telnet connection to the router and gets the message:
R1#telnet 10.1.1.2
Trying 10 1.1 2 Open
(Connection to 10.1.1.2 closed by foreign host)
Router R2 is configured with enable secret and password commands.
Which action resolves the issue?
- A . Configure the logging synchronous command on line vty.
- B . Configure the exec command on line vty.
- C . Configure the login local command on line vty
- D . Configure the enable password command on line vty.
A customer requested a GRE tunnel through the provider network between two customer sites using loopback to hide internal networks.
Which configuration on R2 establishes the tunnel with R1?
- A . R2(config)# interface Tunnel 1
R2(config-if)# ip address 172.20.1.2 255.255.255.0
R2(config-if)# ip mtu 1400
R2(config-if)# ip tcp adjust-mss 1360
R2(config-if)# tunnel source 192.168.20.1
R2(config-if)# tunnel destination 192.168.10.1 - B . R2(config)# interface Tunnel 1
R2(config-if)# ip address 172.20.1.2 255.255.255.0
R2(config-if)# ip mtu 1400
R2(config-if)# ip tcp adjust-mss 1360
R2(config-if)# tunnel source 10.10.2.2
R2(config-if)# tunnel destination 10.10.1.1 - C . R2(config)# interface Tunnel 1
R2(config-if)# ip address 172.20.1.2 255.255.255.0
R2(config-if)# ip mtu 1500
R2(config-if)# ip tcp adjust-mss 1360
R2(config-if)# tunnel source 192.168.20.1
R2(config-if)# tunnel destination 10.10.1.1 - D . R2(config)# interface Tunnel 1
R2(config-if)# ip address 172.20.1.2 255.255.255.0
R2(config-if)# ip mtu 1500
R2(config-if)# ip tcp adjust-mss 1360
R2(config-if)# tunnel source 10.10.2.2
R2(config-if)# tunnel destination 10.10.1.1
Which rouler takes an active role between two LDP neighbors when initiating LDP session negotiation and LDP TCP connection establishment?
- A . with the higher IP address
- B . with the larger number of LDP TCP neighbors
- C . with the lowest IP address
- D . with one interface in the MPLS backbone
Refer to the exhibit.

# Show IP route on R1

All the serial between R1, R2, and R3 have the Same bandwidth. User on the 192.168.1.0/24 network report slow response times while they access resource on network 192.168.3.0/24. When a traceroute is run on the path. It shows that the packet is getting forwarded via R2 to R3 although the link between R1 and R3 is still up.
What must the network administrator to fix the slowness?
- A . Change the Administrative Distance of EIGRP to 5.
- B . Add a static route on R1 using the next hop of R3.
- C . Remove the static route on R1.
- D . Redistribute theR1 route to EIGRP
What are the two prerequisites to enable BFD on Cisco routers? (Choose two)
- A . A supported IP routing protocol must be configured on the participating routers.
- B . OSPF Demand Circuit must run BFD on all participating routers.
- C . ICMP must be allowed on all participating routers.
- D . UDP port 1985 must be allowed on all participating routers.
- E . Cisco Express Forwarding and IP Routing must be enabled on all participating routers.
Refer to the exhibit.

With the partial configuration of a router-on-a-stick. Clients in VLAN 10 on Gi2 cannot obtain IP configuration from the central DHP server is reachable by a successful ping from the route.
Which action resolves the issue?
- A . Configure the ip/ip/dhcp pool f and network 192.168..210.0.255.255/0 commands.
- B . Configure the ip header-address 192-168.265.3 command on the Gi2 10 subinterface.
- C . Configure a valid IP address on the Gi2 interface so that DHCP requests can be forwarded.
- D . Configure the Ip dhcp excluded-address 192.168.255.3 command on the Gi1.10 subinterface.
Refer to the exhibit.


The administrator successfully logs into R1 but cannot access privileged mode commands.
What should be configured to resolve the issue?
- A . aaa authorization reverse-access
- B . secret cisco123! at the end of the username command instead of password cisco123!
- C . matching password on vty lines as cisco123!
- D . enable secret or enable password commands to enter into privileged mode
Refer to the exhibit.

An engineer configured router R3 to redistribute the prefix 10.10.10.0/24 from OSPF into EIGRP R1 has no connectivity to the prefix.
Which action enables receipt of prefixes on R1?
- A . R3 is advertising the 10.20.20 0’24 prefix with a TTL of 1, R3 must set the TTL to 2 for this prefix.
- B . R1 docs not have a neighbor relationship with R2. The EIGRP process should be cleared on R1.
- C . Duplicate router IDs on R1 and R3, R1 should modify its router ID.
- D . R1 is not receiving the next-hop IP address of R3. R2 must enable the network 10 20.20.0V24 within EIGRP.