Amazon ANS-C01 Practice Exams
Last updated on Nov 16,2026- Exam Code: ANS-C01
- Exam Name: Amazon AWS Certified Advanced Networking - Specialty
- Certification Provider: Amazon
- Latest update: Nov 16,2026
An organization is replacing a tape backup system with a storage gateway. there is currently no connectivity to AWS. Initial testing is needed.
What connection option should the organization use to get up and running at minimal cost?
- A . Use an internet connection.
- B . Set up an AWS VPN connection.
- C . Provision an AWS Direct Connection private virtual interface.
- D . Provision a Direct Connect public virtual interface.
A company is using third-party firewall appliances to monitor and inspect traffic on premises The company wants to use this same model on AWS. The company has a single VPC with an internet gateway. The VPC has a fleet of web servers that run on Amazon EC2 instances that are managed by an Auto Scaling group.
The company’s network team needs to work with the security team to establish inline inspection of all packets that are sent to and from the web servers. The solution must scale as the fleet of virtual firewall appliances scales.
Which combination of steps should the network team take to implement this solution? (Select THREE.)
- A . Create a new VPC, and deploy a fleet of firewall appliances. Create a Gateway Load Balancer. Add the firewall appliances as targets.
- B . Create a security group for use with the firewall appliances, and allow port 443. Allow a port for the Gateway Load Balancer to perform health checks.
- C . Create a security group for use with the firewall appliances, and allow port 6081. Allow a port for the Gateway Load Balancer to perform health checks.
- D . Deploy a fleet of firewall appliances to the existing VPC. Create a Gateway Load Balancer. Add the firewall appliances as targets.
- E . Update the internet gateway route table and the web server route table to send traffic to and from the internet to the VPC endpoint ID of the Gateway Load Balancer. Update the subnet route table that is associated with the Gateway Load Balancer endpoint to direct internet traffic to the internet gateway.
- F . Create a new route table inside the web server VPC. Create a new edge association with the internet gateway. Update the internet gateway route table and the web server route table to send traffic to and from the internet to the VPC endpoint ID of the Gateway Load Balancer. Update the subnet route table that is associated with the Gateway Load Balancer endpoint to direct internet traffic to the internet gateway.
A company plans to deploy a two-tier web application to a new VPC in a single AWS Region. The company has configured the VPC with an internet gateway and four subnets. Two of the subnets are public and have default routes that point to the internet gateway. Two of the subnets are private and share a route table that does not have a default route.
The application will run on a set of Amazon EC2 instances that will be deployed behind an external Application Load Balancer. The EC2 instances must not be directly accessible from the internet. The application will use an Amazon S3 bucket in the same Region to store data. The application will invoke S3 GET API operations and S3 PUT API operations from the EC2 instances. A network engineer must design a VPC architecture that minimizes data transfer cost.
Which solution will meet these requirements?
- A . Deploy the EC2 instances in the public subnets. Create an S3 interface endpoint in the VPC. Modify the application configuration to use the S3 endpoint-specific DNS hostname.
- B . Deploy the EC2 instances in the private subnets. Create a NAT gateway in the VPC. Create default routes in the private subnets to the NAT gateway. Connect to Amazon S3 by using the NAT gateway.
- C . Deploy the EC2 instances in the private subnets. Create an S3 gateway endpoint in the VPSpecify die route table of the private subnets during endpoint creation to create routes to Amazon S3.
- D . Deploy the EC2 instances in the private subnets. Create an S3 interface endpoint in the VPC. Modify the application configuration to use the S3 endpoint-specific DNS hostname.
C
Explanation:
Option C is the optimal solution as it involves deploying the EC2 instances in the private subnets, which provides additional security benefits. Additionally, creating an S3 gateway endpoint in the VPC will enable the EC2 instances to communicate with Amazon S3 directly, without incurring data transfer costs. This is because the S3 gateway endpoint uses Amazon’s private network to transfer data between the VPC and S3, which is not charged for data transfer. Furthermore, specifying the route table of the private subnets during endpoint creation will create routes to Amazon S3, which is required for the EC2 instances tocommunicate with S3.
Configure routing on the Paris transit gateway to allow data to flow between sites and the VPCs.
Explanation:
Option C is the best solution because it allows the company to use transit gateways to connect the VPCs in different regions and the on-premises sites. Transit gateways support inter-region peering and VPN attachments, which enable secure and scalable connectivity. Option A is not valid because public subnets are not suitable for workloads that cannot be directly accessible from the internet. Option B is not valid because Direct Connect connections take longer than 5 days to provision.
A company deploys a new web application on Amazon EC2 instances. The application runs in private subnets in three Availability Zones behind an Application Load Balancer (ALB). Security auditors require encryption of all connections. The company uses Amazon Route 53 for DNS and uses AWS Certificate Manager (ACM) to automate SSL/TLS certificate provisioning. SSL/TLS connections are terminated on the ALB.
The company tests the application with a single EC2 instance and does not observe any problems. However, after production deployment, users report that they can log in but that they cannot use the application. Every new web request restarts the login process.
What should a network engineer do to resolve this issue?
- A . Modify the ALB listener configuration. Edit the rule that forwards traffic to the target group. Change the rule to enable group-level stickiness. Set the duration to the maximum application session length.
- B . Replace the ALB with a Network Load Balancer. Create a TLS listener. Create a new target group with the protocol type set to TLS Register the EC2 instances. Modify the target group configuration by enabling the stickiness attribute.
- C . Modify the ALB target group configuration by enabling the stickiness attribute. Use an application-based cookie. Set the duration to the maximum application session length.
- D . Remove the ALB. Create an Amazon Route 53 rule with a failover routing policy for the application name. Configure ACM to issue certificates for each EC2 instance.
A company has an application that runs on a fleet of Amazon EC2 instances. A new company regulation mandates that all network traffic to and from the EC2 instances must be sent to a centralized third-party EC2 appliance for content inspection.
Which solution will meet these requirements?
- A . Configure VPC flow logs on each EC2 network Interface. Publish the flow logs to an Amazon S3 bucket. Create a third-party EC2 appliance to acquire flow logs from the S3 bucket. Log in to the appliance to monitor network content.
- B . Create a third-party EC2 appliance in an Auto Scaling group fronted by a Network Load Balancer (NLB). Configure a mirror session. Specify the NLB as the mirror target. Specify a mirror filter to capture inbound and outbound traffic for the source of the mirror session, specify the EC2 elastic network interfaces for all the instances that host the application.
- C . Configure a mirror session. Specify an Amazon Data Firehose delivery stream as the mirror target Specify a mirror filter to capture inbound and outbound traffic. For the source of the mirror session, specify the EC2 elastic network interfaces for all the instances that host the application Create a third-party EC2 appliance. Send all traffic to the appliance through the Firehose delivery stream for content inspection.
- D . Configure VPC flow logs on each EC2 network interface. Send the logs to Amazon CloudWatch. Create a third-party EC2 appliance. Configure a CloudWatch filter to send the flow logs to Amazon Data Firehose to load the logs into the appliance.
A company has an application that runs on a fleet of Amazon EC2 instances. A new company regulation mandates that all network traffic to and from the EC2 instances must be sent to a centralized third-party EC2 appliance for content inspection.
Which solution will meet these requirements?
- A . Configure VPC flow logs on each EC2 network Interface. Publish the flow logs to an Amazon S3 bucket. Create a third-party EC2 appliance to acquire flow logs from the S3 bucket. Log in to the appliance to monitor network content.
- B . Create a third-party EC2 appliance in an Auto Scaling group fronted by a Network Load Balancer (NLB). Configure a mirror session. Specify the NLB as the mirror target. Specify a mirror filter to capture inbound and outbound traffic for the source of the mirror session, specify the EC2 elastic network interfaces for all the instances that host the application.
- C . Configure a mirror session. Specify an Amazon Data Firehose delivery stream as the mirror target Specify a mirror filter to capture inbound and outbound traffic. For the source of the mirror session, specify the EC2 elastic network interfaces for all the instances that host the application Create a third-party EC2 appliance. Send all traffic to the appliance through the Firehose delivery stream for content inspection.
- D . Configure VPC flow logs on each EC2 network interface. Send the logs to Amazon CloudWatch. Create a third-party EC2 appliance. Configure a CloudWatch filter to send the flow logs to Amazon Data Firehose to load the logs into the appliance.
A company is building an internet-facing application that is hosted on an Amazon Elastic Kubernetes Service (Amazon EKS) cluster. The company is using the Amazon VPC Container Network Interface
(CNI) plugin for Kubernetes for pod networking connectivity. The company needs to expose its application to the internet by using a Network Load Balancer (NLB). The pods that host the application must have visibility of the source IP address that is contained in the original packet that the NLB receives.
How should the network engineer configure the NLB and Amazon EKS settings to achieve these goals?
- A . Specify the Ip target type for the NLB. Set the externalTrafficPolicy attribute to Local in the Kubernetes service specification.
- B . Specify the instance target type for the NLB. Set the externalTrafficPolicy attribute to Cluster in the Kubernetes service specification
- C . Specify the instance target type for the NLB. Set the externalTrafficPolicy attribute to Local in the Kubernetes service specification.
- D . Specify the Ip target type for the NLB. Set the externalTrafficPolicy attribute to Cluster in the Kubernetes service specification
Configure the firewall subnet route tables to direct traffic with a destination of 0.0.0.0/0 to the internet gateway.
A network engineer needs to set up an Amazon EC2 Auto Scaling group to run a Linux-based network appliance in a highly available architecture. The network engineer is configuring the new launch template for the Auto Scaling group.
In addition to the primary network interface the network appliance requires a second network interface that will be used exclusively by the application to exchange traffic with hosts over the internet. The company has set up a Bring Your Own IP (BYOIP) pool that includes an Elastic IP address that should be used as the public IP address for the second network interface.
How can the network engineer implement the required architecture?
- A . Configure the two network interfaces in the launch template. Define the primary network interface to be created in one of the private subnets. For the second network interface, select one of the public subnets. Choose the BYOIP pool ID as the source of public IP addresses.
- B . Configure the primary network interface in a private subnet in the launch template. Use the user data option to run a cloud-init script after boot to attach the second network interface from a subnet with auto-assign public IP addressing enabled.
- C . Create an AWS Lambda function to run as a lifecycle hook of the Auto Scaling group when an instance is launching. In the Lambda function, assign a network interface to an AWS Global Accelerator endpoint.
- D . During creation of the Auto Scaling group, select subnets for the primary network interface. Use the user data option to run a cloud-init script to allocate a second network interface and to associate an Elastic IP address from the BYOIP pool.
D
Explanation:
During creation of the Auto Scaling group, select subnets for the primary network interface. Use the user data option to run a cloud-init script to allocate a second network interface and to associate an Elastic IP address from the BYOIP pool.
This solution meets all of the requirements stated in the question. The primary network interface can be configured in a private subnet during creation of the Auto Scaling group. The user data option can be used to run a cloud-init script that will allocate a second network interface and associate an Elastic IP address from the BYOIP pool with it.