Amazon ANS-C01 Practice Exams
Last updated on Nov 16,2026- Exam Code: ANS-C01
- Exam Name: Amazon AWS Certified Advanced Networking - Specialty
- Certification Provider: Amazon
- Latest update: Nov 16,2026
A company is planning a migration of its critical workloads from an on-premises data center to Amazon EC2 instances. The plan includes a new 10 Gbps AWS Direct Connect dedicated connection from the on-premises data center to a VPC that is attached to a transit gateway. The migration must occur over encrypted paths between the on-premises data center and the AWS Cloud.
Which solution will meet these requirements while providing the HIGHEST throughput?
- A . Configure a public VIF on the Direct Connect connection. Configure an AWS Site-to-Site
VPN connection to the transit gateway as a VPN attachment. - B . Configure a transit VIF on the Direct Connect connection. Configure an IPsec VPN connection to an EC2 instance that is running third-party VPN software.
- C . Configure MACsec for the Direct Connect connection. Configure a transit VIF to a Direct Connect gateway that is associated with the transit gateway.
- D . Configure a public VIF on the Direct Connect connection. Configure two AWS Site-to-Site VPN connections to the transit gateway. Enable equal-cost multi-path (ECMP) routing.
C
Explanation:
https://aws.amazon.com/blogs/networking-and-content-delivery/adding-macsec-security-to-aws-direct-connect-connections/
A company is developing an API-based application on AWS for its process workflow requirements. The API will be invoked by clients in the company’s on-premises data centers. The company has set up an AWS Direct Connect connection between on premises and AWS. A network engineer decides to implement the API as a private REST API in Amazon API Gateway. The network engineer wants to ensure that clients can reach the API endpoint through private communication.
Which solution can the network engineer use to invoke the API without any additional infrastructure setup?
- A . Create an interface VPC endpoint for API Gateway with private DNS names enabled. Access the API by using the private DNS name of the endpoint.
- B . Create an interface VPC endpoint for API Gateway with private DNS names enabled. Access the API by using an Amazon Route 53 alias of the endpoint.
- C . Create an interface VPC endpoint for API Gateway. Associate the endpoint with the private REST API. Access the API by using an Amazon Route 53 alias of the endpoint.
- D . Create an interface VPC endpoint for API Gateway with private DNS names enabled. Access the API by using the public DNS name of the endpoint.
A company has a hybrid IT setup that includes services that run in an on-premises data center and in the AWS Cloud. The company is using AWS Direct Connect to connect its data center to AWS. The company is using one AWS Site-to-Site VPN connection as backup and requires a backup connectivity option to always be present. The company is transitioning to IPv6 by implementing dual-stack architectures.
Which combination of steps will transition the data center’s connectivity to AWS in the LEAST amount of time? (Select TWO.)
- A . Create a new Site-to-Site VPN tunnel for the IPv6 traffic.
- B . Create a new dual-stack Site-to-Site VPN connection between the data center and AWS. Provision routing. Delete the original Site-to-Site VPN connection
- C . Associate a new dual-stack public VIF with the Direct Connect connection. Migrate the Direct Connect traffic to the new VIF.
- D . Add a new IPv6 peer in the existing VIF. Use the IPv6 address provided by Amazon on the peer router.
- E . Send IPv6 traffic between the data center and AWS in a tunnel inside the existing IPv4 tunnels.
An organization is using a VPC endpoint for Amazon S3. When the security group rules for a set of instances were initially configured, access was restricted to allow traffic only to the IP addresses of the Amazon S3 API endpoints in the region from the published JSON file. The application was working properly, but now is logging a growing number of timeouts when connecting with Amazon S3. No internet gateway is configured for the VPC.
Which solution will fix the connectivity failures with the LEAST amount of effort?
- A . Create a Lambda function to update the security group based on AmazonIPSpaceChanged notifications.
- B . Update the VPC routing to direct Amazon S3 prefix-list traffic to the VPC endpoint using the route table APIs.
- C . Update the application server’s outbound security group to use the prefix-list for Amazon S3 in the same region.
- D . Create an additional VPC endpoint for Amazon S3 in the same route table to scale the concurrent connections to Amazon.
C
Explanation:
https://aws.amazon.com/blogs/aws/subscribe-to-aws-public-ip-address-changes-via-amazon-sns/
A company is deploying third-party firewall appliances for traffic inspection and NAT capabilities in its VPC. The VPC is configured with private subnets and public subnets. The company needs to deploy the firewall appliances behind a load balancer.
Which architecture will meet these requirements MOST cost-effectively?
- A . Deploy a Gateway Load Balancer with the firewall appliances as targets. Configure the firewall
appliances with a single network interface in a private subnet. Use a NAT gateway to send the traffic to the internet after inspection. - B . Deploy a Gateway Load Balancer with the firewall appliances as targets. Configure the firewall appliances with two network interfaces: one network interface in a private subnet and another network interface in a public subnet. Use the NAT functionality on the firewall appliances to send the traffic to the internet after inspection.
- C . Deploy a Network Load Balancer with the firewall appliances as targets. Configure the firewall appliances with a single network interface in a private subnet. Use a NAT gateway to send the traffic to the internet after inspection.
- D . Deploy a Network Load Balancer with the firewall appliances as targets. Configure the firewall appliances with two network interfaces: one network interface in a private subnet and another network interface in a public subnet. Use the NAT functionality on the firewall appliances to send the traffic to the internet after inspection.
A company is deploying third-party firewall appliances for traffic inspection and NAT capabilities in its VPC. The VPC is configured with private subnets and public subnets. The company needs to deploy the firewall appliances behind a load balancer.
Which architecture will meet these requirements MOST cost-effectively?
- A . Deploy a Gateway Load Balancer with the firewall appliances as targets. Configure the firewall
appliances with a single network interface in a private subnet. Use a NAT gateway to send the traffic to the internet after inspection. - B . Deploy a Gateway Load Balancer with the firewall appliances as targets. Configure the firewall appliances with two network interfaces: one network interface in a private subnet and another network interface in a public subnet. Use the NAT functionality on the firewall appliances to send the traffic to the internet after inspection.
- C . Deploy a Network Load Balancer with the firewall appliances as targets. Configure the firewall appliances with a single network interface in a private subnet. Use a NAT gateway to send the traffic to the internet after inspection.
- D . Deploy a Network Load Balancer with the firewall appliances as targets. Configure the firewall appliances with two network interfaces: one network interface in a private subnet and another network interface in a public subnet. Use the NAT functionality on the firewall appliances to send the traffic to the internet after inspection.
A global company runs business applications in the us-east-1 Region inside a VPC. One of the company’s regional offices in London uses a virtual private gateway for an AWS Site-to-Site VPN connection tom the VPC. The company has configured a transit gateway and has set up peering between the VPC and other VPCs that various departments in the company use.
Employees at the London office are experiencing latency issues when they connect to the business applications.
What should a network engineer do to reduce this latency?
- A . Create a new Site-to-Site VPN connection. Set the transit gateway as the target gateway. Enable acceleration on the new Site-to-Site VPN connection. Update the VPN device in the London office with the new connection details.
- B . Modify the existing Site-to-Site VPN connection by setting the transit gateway as the target gateway. Enable acceleration on the existing Site-to-Site VPN connection.
- C . Create a new transit gateway in the eu-west-2 (London) Region. Peer the new transit gateway with the existing transit gateway. Modify the existing Site-to-Site VPN connection by setting the new transit gateway as the target gateway.
- D . Create a new AWS Global Accelerator standard accelerator that has an endpoint of the Site-to-Site VPN connection. Update the VPN device in the London office with the new connection details.
A
Explanation:
By creating a new transit gateway in the eu-west-2 (London) Region and peering it with the existing transit gateway, the network latency from the London office to the business applications running in the us-east-1 (U.S. East) Region can be effectively reduced. Modifying the existing Site-to-Site VPN connection to set the new transit gateway as the target gateway ensures that traffic is more efficiently routed between the two AWS regions. This method leverages AWS’s global network infrastructure to improve the speed and efficiency of data transfer.
A global company runs business applications in the us-east-1 Region inside a VPC. One of the company’s regional offices in London uses a virtual private gateway for an AWS Site-to-Site VPN connection tom the VPC. The company has configured a transit gateway and has set up peering between the VPC and other VPCs that various departments in the company use.
Employees at the London office are experiencing latency issues when they connect to the business applications.
What should a network engineer do to reduce this latency?
- A . Create a new Site-to-Site VPN connection. Set the transit gateway as the target gateway. Enable acceleration on the new Site-to-Site VPN connection. Update the VPN device in the London office with the new connection details.
- B . Modify the existing Site-to-Site VPN connection by setting the transit gateway as the target gateway. Enable acceleration on the existing Site-to-Site VPN connection.
- C . Create a new transit gateway in the eu-west-2 (London) Region. Peer the new transit gateway with the existing transit gateway. Modify the existing Site-to-Site VPN connection by setting the new transit gateway as the target gateway.
- D . Create a new AWS Global Accelerator standard accelerator that has an endpoint of the Site-to-Site VPN connection. Update the VPN device in the London office with the new connection details.
A
Explanation:
By creating a new transit gateway in the eu-west-2 (London) Region and peering it with the existing transit gateway, the network latency from the London office to the business applications running in the us-east-1 (U.S. East) Region can be effectively reduced. Modifying the existing Site-to-Site VPN connection to set the new transit gateway as the target gateway ensures that traffic is more efficiently routed between the two AWS regions. This method leverages AWS’s global network infrastructure to improve the speed and efficiency of data transfer.
A company’s network engineer needs to design a new solution to help troubleshoot and detect network anomalies. The network engineer has configured Traffic Mirroring. However, the mirrored traffic is overwhelming the Amazon EC2 instance that is the traffic mirror target. The EC2 instance hosts tools that the company’s security team uses to analyze the traffic. The network engineer needs to design a highly available solution that can scale to meet the demand of the mirrored traffic.
Which solution will meet these requirements?
- A . Deploy a Network Load Balancer (NLB) as the traffic mirror target. Behind the NLB. deploy a fleet of EC2 instances in an Auto Scaling group. Use Traffic Mirroring as necessary.
- B . Deploy an Application Load Balancer (ALB) as the traffic mirror target. Behind the ALB, deploy a fleet of EC2 instances in an Auto Scaling group. Use Traffic Mirroring only during non-business hours.
- C . Deploy a Gateway Load Balancer (GLB) as the traffic mirror target. Behind the GLB. deploy a fleet of EC2 instances in an Auto Scaling group. Use Traffic Mirroring as necessary.
- D . Deploy an Application Load Balancer (ALB) with an HTTPS listener as the traffic mirror target. Behind the ALB. deploy a fleet of EC2 instances in an Auto Scaling group. Use Traffic Mirroring only during active events or business hours.
A company’s network engineer needs to design a new solution to help troubleshoot and detect network anomalies. The network engineer has configured Traffic Mirroring. However, the mirrored traffic is overwhelming the Amazon EC2 instance that is the traffic mirror target. The EC2 instance hosts tools that the company’s security team uses to analyze the traffic. The network engineer needs to design a highly available solution that can scale to meet the demand of the mirrored traffic.
Which solution will meet these requirements?
- A . Deploy a Network Load Balancer (NLB) as the traffic mirror target. Behind the NLB. deploy a fleet of EC2 instances in an Auto Scaling group. Use Traffic Mirroring as necessary.
- B . Deploy an Application Load Balancer (ALB) as the traffic mirror target. Behind the ALB, deploy a fleet of EC2 instances in an Auto Scaling group. Use Traffic Mirroring only during non-business hours.
- C . Deploy a Gateway Load Balancer (GLB) as the traffic mirror target. Behind the GLB. deploy a fleet of EC2 instances in an Auto Scaling group. Use Traffic Mirroring as necessary.
- D . Deploy an Application Load Balancer (ALB) with an HTTPS listener as the traffic mirror target. Behind the ALB. deploy a fleet of EC2 instances in an Auto Scaling group. Use Traffic Mirroring only during active events or business hours.