Amazon ANS-C01 Practice Exams
Last updated on Nov 16,2026- Exam Code: ANS-C01
- Exam Name: Amazon AWS Certified Advanced Networking - Specialty
- Certification Provider: Amazon
- Latest update: Nov 16,2026
A company has two data centers that are interconnected with multiple redundant links from different suppliers. The company uses IP addresses that are within the 172.16.0.0/16 CIDR block. The company is running iBGP between the two data centers by using a private Autonomous System Number (ASN)and IGP.
The company is moving toward a hybrid setup in which the company will initially use one VPC in the AWS Cloud. An AWS Direct Connect connection runs from the first data center to a Direct Connect gateway by using a private VIF On the connection, the company advertises a summarized route for the 172.16.0.0/16 network. The company is planning to set up a second summarized route from the second data center to a different Direct Connect location.
The company needs to implement a solution to route traffic to and from AWS through the first Direct Connect connection. The solution must use the second Direct Connect connection for failover purposes only.
Which solution will meet these requirements?
- A . Prepend the private ASN on the BGP announcements to AWS from the second data center. Add a second VIF in the first Direct Connect connection. Advertise the same network without any prepends from the first data center. Implement the same setup for the BGP announcement from AWS to the two data centers.
- B . Tag the BGP announcements with the local preference BGP community tags. Set the tag to high preference for the first data center. Set the tag to low preference for the second data center. Configure the second data center’s router to have a lower local preference for the direct AWS BGP advertisements than for the advertisement from the first data center.
- C . Configure the Direct Connect gateway to prefer routing through the Direct Connect connection with the first data center. Configure the second data center’s router to have a lower local preference for the direct AWS BGP advertisements than for the advertisement from the first data center.
- D . Configure the local AWS Region BGP community tag on the BGP route that is advertised from the first data center. Configure AS PATH prepends on the BGP announcements from the second data center.
A company uses Amazon Route 53 for its DNS needs. The company’s security team wants to update the DNS infrastructure to provide the most recent security posture.
The security team has configured DNS Security Extensions (DNSSEC) for the domain. The security team wants a network engineer to explain who is responsible for the rotation of DNSSEC keys.
Which explanation should the network administrator provide to the security team?
- A . AWS rotates the zone-signing key (ZSK). The company rotates the key-signing key (KSK).
- B . The company rotates the zone-signing key (ZSK) and the key-signing key (KSK).
- C . AWS rotates the AWS Key Management Service (AWS KMS) key and the key-signing key (KSK).
- D . The company rotates the AWS Key Management Service (AWS KMS) key. AWS rotates the key-signing key (KSK).
A company uses Amazon Route 53 for its DNS needs. The company’s security team wants to update the DNS infrastructure to provide the most recent security posture.
The security team has configured DNS Security Extensions (DNSSEC) for the domain. The security team wants a network engineer to explain who is responsible for the rotation of DNSSEC keys.
Which explanation should the network administrator provide to the security team?
- A . AWS rotates the zone-signing key (ZSK). The company rotates the key-signing key (KSK).
- B . The company rotates the zone-signing key (ZSK) and the key-signing key (KSK).
- C . AWS rotates the AWS Key Management Service (AWS KMS) key and the key-signing key (KSK).
- D . The company rotates the AWS Key Management Service (AWS KMS) key. AWS rotates the key-signing key (KSK).
A media company is implementing a news website for a global audience. The website uses Amazon CloudFront as its content delivery network. The backend runs on Amazon EC2 Windows instances behind an Application Load Balancer (ALB). The instances are part of an Auto Scaling group. The company’s customers access the website by using service example com as the CloudFront custom domain name. The CloudFront origin points to an ALB that uses service-alb.example.com as the domain name.
The company’s security policy requires the traffic to be encrypted in transit at all times between the users and the backend.
Which combination of changes must the company make to meet this security requirement? (Choose three.)
- A . Create a self-signed certificate for service.example.com. Import the certificate into AWS Certificate Manager (ACM). Configure CloudFront to use this imported SSL/TLS certificate. Change the default behavior to redirect HTTP to HTTPS.
- B . Create a certificate for service.example.com by using AWS Certificate Manager (ACM). Configure CloudFront to use this custom SSL/TLS certificate. Change the default behavior to redirect HTTP to HTTPS.
- C . Create a certificate with any domain name by using AWS Certificate Manager (ACM) for the EC2 instances. Configure the backend to use this certificate for its HTTPS listener. Specify the instance target type during the creation of a new target group that uses the HTTPS protocol for its targets. Attach the existing Auto Scaling group to this new target group.
- D . Create a public certificate from a third-party certificate provider with any domain name for the EC2 instances. Configure the backend to use this certificate for its HTTPS listener. Specify the instance target type during the creation of a new target group that uses the HTTPS protocol for its targets. Attach the existing Auto Scaling group to this new target group.
- E . Create a certificate for service-alb.example.com by using AWS Certificate Manager (ACM). On the ALB add a new HTTPS listener that uses the new target group and the service-alb.example.com ACM certificate. Modify the CloudFront origin to use the HTTPS protocol only. Delete the HTTP listener on the ALB.
- F . Create a self-signed certificate for service-alb.example.com. Import the certificate into AWS Certificate Manager (ACM). On the ALB add a new HTTPS listener that uses the new target group and the imported service-alb.example.com ACM certificate. Modify the CloudFront origin to use the HTTPS protocol only. Delete the HTTP listener on the ALB.
A customer has set up multiple VPCs for Dev, Test, Prod, and Management. You need to set up AWS Direct Connect to enable data flow from on-premises to each VPC. The customer has monitoring software running in the Management VPC that collects metrics from the instances in all the other VPCs. Due to budget requirements, data transfer charges should be kept at minimum.
Which design should be recommended?
- A . Create a total of four private VIFs, one for each VPC owned by the customer, and route traffic between VPCs using the Direct Connect link.
- B . Create a private VIF to the Management VPC, and peer this VPC to all other VPCs.
- C . Create a private VIF to the Management VPC, and peer this VPC to all other VPCs, enable source/destination NAT in the Management VPC.
- D . Create a total of four private VIFs, and enable VPC peering between all VPCs.
An international company provides early warning about tsunamis. The company plans to use IoT devices to monitor sea waves around the world. The data that is collected by the IoT devices must reach the company’s infrastructure on AWS as quickly as possible. The company is using three operation centers around the world. Each operation center is connected to AWS through Its own AWS Direct Connect connection. Each operation center is connected to the internet through at least two upstream internet service providers.
The company has its own provider-independent (PI) address space. The IoT devices use TCP protocols for reliable transmission of the data they collect. The IoT devices have both landline and mobile internet connectivity. The infrastructure and the solution will be deployed in multiple AWS Regions. The company will use Amazon Route 53 for DNS services.
A network engineer needs to design connectivity between the IoT devices and the services that run in the AWS Cloud.
Which solution will meet these requirements with the HIGHEST availability?
- A . Set up an Amazon CloudFront distribution with origin failover. Create an origin group for each Region where the solution is deployed.
- B . Set up Route 53 latency-based routing. Add latency alias records. For the latency alias records, set the value of Evaluate Target Health to Yes.
- C . Set up an accelerator in AWS Global Accelerator. Configure Regional endpoint groups andhealth checks.
- D . Set up Bring Your Own IP (BYOIP) addresses. Use the same PI addresses for each Region where the solution is deployed.
An international company provides early warning about tsunamis. The company plans to use IoT devices to monitor sea waves around the world. The data that is collected by the IoT devices must reach the company’s infrastructure on AWS as quickly as possible. The company is using three operation centers around the world. Each operation center is connected to AWS through Its own AWS Direct Connect connection. Each operation center is connected to the internet through at least two upstream internet service providers.
The company has its own provider-independent (PI) address space. The IoT devices use TCP protocols for reliable transmission of the data they collect. The IoT devices have both landline and mobile internet connectivity. The infrastructure and the solution will be deployed in multiple AWS Regions. The company will use Amazon Route 53 for DNS services.
A network engineer needs to design connectivity between the IoT devices and the services that run in the AWS Cloud.
Which solution will meet these requirements with the HIGHEST availability?
- A . Set up an Amazon CloudFront distribution with origin failover. Create an origin group for each Region where the solution is deployed.
- B . Set up Route 53 latency-based routing. Add latency alias records. For the latency alias records, set the value of Evaluate Target Health to Yes.
- C . Set up an accelerator in AWS Global Accelerator. Configure Regional endpoint groups andhealth checks.
- D . Set up Bring Your Own IP (BYOIP) addresses. Use the same PI addresses for each Region where the solution is deployed.
A company is running business applications on AWS. The company uses 50 AWS accounts, thousands of VPCs. and 3 AWS Regions across the United States and Europe.
A network engineer needs to establish network connectivity between an on-premises data center and the Regions. The network engineer also must establish connectivity between the VPCs. On-premises users and applications must be able to connect to applications that run in the VPCs.
The company has an existing AWS Direct Connect connection that the network engineer can use. The network engineer creates a transit gateway in each Region and configures the transit gateways as inter-Region peers.
Which solution will provide network connectivity from the on-premises data center to the Regions and will provide inter-VPC communications across the different Regions?
- A . Create a private VIF with a gateway type of virtual private gateway. Configure the private VIF to use a virtual private gateway that is associated with one of the VPCs.
- B . Create a private VIF to a new Direct Connect gateway. Associate the new Direct Connect gateway with a virtual private gateway in each VPC.
- C . Create a transit VIF with a gateway association to a new Direct Connect gateway. Associate each transit gateway with the new Direct Connect gateway.
- D . Create an AWS Site-to-Site VPN connection that uses a public VIF for the Direct Connect connection Attach the Site-to-Site VPN connection to the transit gateways.
A company’s network engineer builds and tests network designs for VPCs in a development account. The company needs to monitor the changes that are made to network resources and must ensure strict compliance with network security policies. The company also needs access to the historical configurations of network resources.
Which solution will meet these requirements?
- A . Create an Amazon EventBridge (Amazon CloudWatch Events) rule with a custom pattern to monitor the account for changes. Configure the rule to invoke an AWS Lambda function to identify noncompliant resources. Update an Amazon DynamoDB table with the changes that are identified.
- B . Create custom metrics from Amazon CloudWatch logs. Use the metrics to invoke an AWS Lambda function to identify noncompliant resources. Update an Amazon DynamoDB table with the changes that are identified.
- C . Record the current state of network resources by using AWS Config. Create rules that reflect the desired configuration settings. Set remediation for noncompliant resources.
- D . Record the current state of network resources by using AWS Systems Manager Inventory. Use Systems Manager State Manager to enforce the desired configuration settings and to carry out remediation for noncompliant resources.
C
Explanation:
Recording the current state of network resources by using AWS Config would enable auditing and assessment of resource configurations and compliance3. Creating rules that reflect the desired configuration settings would enable evaluation of whether the network resources comply with network security policies3. Setting remediation for noncompliant resources would enable automatic correction of undesired configurations3.
In the Connectivity account: Accept the attachment. Associate a route table with the attachment.
Explanation:
This set of steps shares the transit gateway from the Connectivity account to the Production account using AWS Resource Access Manager. The attachment is then created in the Production account, and the Connectivity account accepts the attachment and associates a route table with it.