Amazon ANS-C01 Practice Exams
Last updated on Nov 16,2026- Exam Code: ANS-C01
- Exam Name: Amazon AWS Certified Advanced Networking - Specialty
- Certification Provider: Amazon
- Latest update: Nov 16,2026
A company has deployed its AWS environment in a single AWS Region. The environment consists of a few hundred application VPCs, a shared services VPC, and a VPN connection to the company’s on-premises environment.
A network engineer needs to implement a transit gateway with the following requirements:
• Application VPCs must be isolated from each other.
• Bidirectional communication must be allowed between the application VPCs and the on-premises network.
• Bidirectional communication must be allowed between the application VPCs and the shared services VPC.
The network engineer creates the transit gateway with options disabled for default route table association and default route table propagation. The network engineer also creates the VPN attachment for the on-premises network and creates the VPC attachments for the application VPCs and the shared services VPC.
The network engineer must meet all the requirements for the transit gateway by designing a solution that needs the least number of transit gateway route tables.
Which combination of actions should the network engineer perform to accomplish this goal? (Choose two.)
- A . Configure a separate transit gateway route table for on premises. Associate the VPN attachment with this transit gateway route table. Propagate all application VPC attachments to this transit gateway route table.
- B . Configure a separate transit gateway route table for each application VPC. Associate each application VPC attachment with its respective transit gateway route table. Propagate the shared services VPC attachment and the VPN attachment to this transit gateway route table.
- C . Configure a separate transit gateway route table for all application VPCs. Associate all application VPCs with this transit gateway route table. Propagate the shared services VPC attachment and the VPN attachment to this transit gateway route table.
- D . Configure a separate transit gateway route table for the shared services VPC. Associate the shared services VPC attachment with this transit gateway route table. Propagate all application VPC attachments to this transit gateway route table.
- E . Configure a separate transit gateway route table for on premises and the shared services VPC. Associate the VPN attachment and the shared services VPC attachment with this transit gateway route table. Propagate all application VPC attachments to this transit gateway route table.
A company is deploying an application. The application is implemented in a series of containers in an Amazon Elastic Container Service (Amazon ECS) cluster. The company will use the Fargate launch type for its tasks. The containers will run workloads that require connectivity initiated over an SSL connection. Traffic must be able to flow to the application from other AWS accounts over private connectivity. The application must scale in a manageable way as more consumers use the application.
Which solution will meet these requirements?
- A . Choose a Gateway Load Balancer (GLB) as the type of load balancer for the ECS service. Create a lifecycle hook to add new tasks to the target group from Amazon ECS as
required to handle scaling. Specify the GLB in the service definition. Create a VPC peer for external AWS accounts. Update the route tables so that the AWS accounts can reach the GLB. - B . Choose an Application Load Balancer (ALB) as the type of load balancer for the ECS service. Create path-based routing rules to allow the application to target the containers that are registered in the target group. Specify the ALB in the service definition. Create a VPC endpoint service for the ALB Share the VPC endpoint service with other AWS accounts.
- C . Choose an Application Load Balancer (ALB) as the type of load balancer for the ECS service. Create path-based routing rules to allow the application to target the containers that are registered in the target group. Specify the ALB in the service definition. Create a VPC peer for the external AWS accounts. Update the route tables so that the AWS accounts can reach the ALB.
- D . Choose a Network Load Balancer (NLB) as the type of load balancer for the ECS service. Specify the NLB in the service definition. Create a VPC endpoint service for the NLB. Share the VPC endpoint service with other AWS accounts.
A network engineer is working on a private DNS design to integrate AWS workloads and on-premises resources. The AWS deployment consists of five VPCs in the eu-west-1 Region that connect to the on-premises network over AWS Direct Connect. The VPCs communicate with each other by using a transit gateway. Each VPC is associated with a private hosted zone that uses the aws.example.internal domain. The network engineer creates an Amazon Route 53 Resolver outbound endpoint in a shared services VPC and attaches the shared services VPC to the transit gateway.
The network engineer is implementing a solution for DNS resolution. Queries for hostnames that end with aws.example.internal must use the private hosted zone. Queries for hostnames that end with all other domains must be forwarded to a private on-premises DNS resolver.
Which solution will meet these requirements?
- A . Add a forwarding rule for”””that targets the on-premises server’s DNS IP address. Add a system rule for aws.example.internal that targets Route 53 Resolver.
- B . Add a forwarding rule for aws example.internal that targets Route 53 Resolver. Add a system rule for V that targets the Route 53 Resolver outbound endpoint.
- C . Add a forwarding rule for”””that targets the Route 53 Resolver outbound endpoint.
- D . Add a forwarding rule for"." that targets the Route 53 Resolver outbound endpoint.
A company has deployed an AWS Network Firewall firewall into a VPC. A network engineer needs to implement a solution to deliver Network Firewall flow logs to the company’s Amazon OpenSearch Service (Amazon Elasticsearch Service) cluster in the shortest possible time.
Which solution will meet these requirements?
- A . Create an Amazon S3 bucket. Create an AWS Lambda function to load logs into the Amazon OpenSearch Service (Amazon Elasticsearch Service) cluster. Enable Amazon Simple Notification Service (Amazon SNS) notifications on the S3 bucket to invoke the Lambda function. Configure flow logs for the firewall. Set the S3 bucket as the destination.
- B . Create an Amazon Kinesis Data Firehose delivery stream that includes the Amazon OpenSearch Service (Amazon Elasticsearch Service) cluster as the destination. Configure flow logs for the firewall Set the Kinesis Data Firehose delivery stream as the destination for the Network Firewall flow logs.
- C . Configure flow logs for the firewall. Set the Amazon OpenSearch Service (Amazon Elasticsearch Service) cluster as the destination for the Network Firewall flow logs.
- D . Create an Amazon Kinesis data stream that includes the Amazon OpenSearch Service (Amazon Elasticsearch Service) cluster as the destination. Configure flow logs for the firewall. Set the Kinesis data stream as the destination for the Network Firewall flow logs.
B
Explanation:
https://aws.amazon.com/blogs/networking-and-content-delivery/how-to-analyze-aws-network-firewall-logs-using-amazon-opensearch-service-part-1/
A company is planning to deploy many software-defined WAN (SD-WAN) sites. The company is using AWS Transit Gateway and has deployed a transit gateway in the required AWS Region. A network engineer needs to deploy the SD-WAN hub virtual appliance into a VPC that is connected to the transit gateway. The solution must support at least 5 Gbps of throughput from the SD-WAN hub virtual appliance to other VPCs that are attached to the transit gateway.
Which solution will meet these requirements?
- A . Create a new VPC for the SD-WAN hub virtual appliance. Create two IPsec VPN connections between the SD-WAN hub virtual appliance and the transit gateway. Configure BGP over the IPsec VPN connections
- B . Assign a new CIDR block to the transit gateway. Create a new VPC for the SD-WAN hub virtual appliance. Attach the new VPC to the transit gateway with a VPC attachment. Add a transit gateway Connect attachment. Create a Connect peer and specify the GRE and BGP parameters. Create a route in the appropriate VPC for the SD-WAN hub virtual appliance to route to the transit gateway.
- C . Create a new VPC for the SD-WAN hub virtual appliance. Attach the new VPC to the transit gateway with a VPC attachment. Create two IPsec VPN connections between the SD-WAN hub virtual appliance and the transit gateway. Configure BGP over the IPsec VPN connections.
- D . Assign a new CIDR block to the transit gateway. Create a new VPC for the SD-WAN hub virtual appliance. Attach the new VPC to the transit gateway with a VPC attachment. Add a transit gateway Connect attachment. Create a Connect peer and specify the VXLAN and BGP parameters. Create a route in the appropriate VPC for the SD-WAN hub virtual appliance to route to the transit gateway.
A company uses a hybrid architecture and has an AWS Direct Connect connection between its on-premises data center and AWS. The company has production applications that run in the on-premises data center. The company also has production applications that run in a VPC. The applications that run in the on-premises data center need to communicate with the applications that run in the VPC. The company is using corp.example.com as the domain name for the on-premises resources and is using an Amazon Route 53 private hosted zone for aws.example.com to host the VPC resources.
The company is using an open-source recursive DNS resolver in a VPC subnet and is using a DNS resolver in the on-premises data center. The company’s on-premises DNS resolver has a forwarder that directs requests for the aws.example.com domain name to the DNS resolver in the VPC. The DNS resolver in the VPC has a forwarder that directs requests for the corp.example.com domain name to the DNS resolver in the on-premises data center. The company has deckled to replace the open-source recursive DNS resolver with Amazon Route 53 Resolver endpoints.
Which combination of steps should a network engineer take to make this replacement? (Choose three.)
- A . Create a Route 53 Resolver rule to forward aws.example.com domain queries to the IP addresses of the outbound endpoint.
- B . Configure the on-premises DNS resolver to forward aws.example.com domain queries to the IP addresses of the inbound endpoint.
- C . Create a Route 53 Resolver inbound endpoint and a Route 53 Resolver outbound endpoint.
- D . Create a Route 53 Resolver rule to forward aws.example.com domain queries to the IP addresses of the inbound endpoint.
- E . Create a Route 53 Resolver rule to forward corp.example.com domain queries to the IP address of the on-premises DNS resolver.
- F . Configure the on-premises DNS resolver to forward aws.example.com queries to the IP addresses of the outbound endpoint.
B,C,E
Explanation:
To replace the open-source recursive DNS resolver with Amazon Route 53 Resolver endpoints in a hybrid architecture where on-premises applications need to communicate with applications running in a VPC, a network engineer should take the following steps:
✑ Create a Route 53 Resolver inbound endpoint and a Route 53 Resolver outbound endpoint. (Option C)
✑ Configure the on-premises DNS resolver to forward aws.example.com domain queries to the IP addresses of the inbound endpoint. (Option B)
✑ Create a Route 53 Resolver rule to forward corp.example.com domain queries to the IP address of the on-premises DNS resolver. (Option E)
These steps will allow for seamless replacement of the open-source recursive DNS resolver with Amazon Route 53 Resolver endpoints and enable communication between on-premises and VPC applications.
A company uses a hybrid architecture and has an AWS Direct Connect connection between its on-premises data center and AWS. The company has production applications that run in the on-premises data center. The company also has production applications that run in a VPC. The applications that run in the on-premises data center need to communicate with the applications that run in the VPC. The company is using corp.example.com as the domain name for the on-premises resources and is using an Amazon Route 53 private hosted zone for aws.example.com to host the VPC resources.
The company is using an open-source recursive DNS resolver in a VPC subnet and is using a DNS resolver in the on-premises data center. The company’s on-premises DNS resolver has a forwarder that directs requests for the aws.example.com domain name to the DNS resolver in the VPC. The DNS resolver in the VPC has a forwarder that directs requests for the corp.example.com domain name to the DNS resolver in the on-premises data center. The company has deckled to replace the open-source recursive DNS resolver with Amazon Route 53 Resolver endpoints.
Which combination of steps should a network engineer take to make this replacement? (Choose three.)
- A . Create a Route 53 Resolver rule to forward aws.example.com domain queries to the IP addresses of the outbound endpoint.
- B . Configure the on-premises DNS resolver to forward aws.example.com domain queries to the IP addresses of the inbound endpoint.
- C . Create a Route 53 Resolver inbound endpoint and a Route 53 Resolver outbound endpoint.
- D . Create a Route 53 Resolver rule to forward aws.example.com domain queries to the IP addresses of the inbound endpoint.
- E . Create a Route 53 Resolver rule to forward corp.example.com domain queries to the IP address of the on-premises DNS resolver.
- F . Configure the on-premises DNS resolver to forward aws.example.com queries to the IP addresses of the outbound endpoint.
B,C,E
Explanation:
To replace the open-source recursive DNS resolver with Amazon Route 53 Resolver endpoints in a hybrid architecture where on-premises applications need to communicate with applications running in a VPC, a network engineer should take the following steps:
✑ Create a Route 53 Resolver inbound endpoint and a Route 53 Resolver outbound endpoint. (Option C)
✑ Configure the on-premises DNS resolver to forward aws.example.com domain queries to the IP addresses of the inbound endpoint. (Option B)
✑ Create a Route 53 Resolver rule to forward corp.example.com domain queries to the IP address of the on-premises DNS resolver. (Option E)
These steps will allow for seamless replacement of the open-source recursive DNS resolver with Amazon Route 53 Resolver endpoints and enable communication between on-premises and VPC applications.
A bank built a new version of its banking application in AWS using containers that content to an on-premises database over VPN connection. This application version requires users to also update their client application. The bank plans to deprecate the earlier client version. However, the company wants to keep supporting earlier clients through their on-premises version of the application to serve a small portion of the customers who haven’t yet upgraded.
What design will allow the company to serve both newer and earlier clients in the MOST efficient way?
- A . Use an Amazon Route 53 multivalue answer routing policy to route older client traffic to the on-premises application version and the rest of the traffic to the new AWS based version.
- B . Use a Classic Load Balancer for the new application. Route all traffic to the new application by using an Elastic Load Balancing (ELB) load balancer DNS. Define a user-agent-based rule on the backend servers to redirect earlier clients to the on-premises application.
- C . Use an Application Load Balancer for the new application. Register both the new and earlier applications as separate target groups and use path-based routing to route traffic based on the application version.
- D . Use an Application Load Balancer for the new application. Register both the new and earlier application backends as separate target groups. Use header-based routing to route traffic based on the application version.
A network engineer is working on a large migration effort from an on-premises data center to an AWS Control Tower based multi-account environment. The environment has a transit gateway that is deployed to a central network services account. The central network services account has been shared with an organization in AWS Organizations through AWS Resource Access Manager (AWS RAM).
A shared services account also exists in the environment. The shared services account hosts workloads that need to be shared with the entire organization.
The network engineer needs to create a solution to automate the deployment of common network components across the environment. The solution must provision a
VPC for application workloads to each new and existing member account. The VPCs must be connected to the transit gateway in the central network services account.
Which combination of steps will meet these requirements with the LEAST operational overhead? (Select THREE.)
- A . Deploy an AWS Lambda function to the shared services account. Program the Lambda function to assume a role in the new and existing member accounts to provision the necessary network infrastructure.
- B . Update the existing accounts with an Account Factory Customization (AFC). Select the same AFC when provisioning new accounts.
- C . Create an AWS CloudFormation template that describes the infrastructure that needs to be created in each account. Upload the template as an AWS Service Catalog product to the shared services account.
- D . Deploy an Amazon EventBridge rule on a default event bus in the shared services account. Configure the EventBridge rule to react to AWS Control Tower CreateManagedAccount lifecycle events and to invoke the AWS Lambda function.
- E . Create an AWSControlTowerBlueprintAccess role in the shared services account.
- F . Create an AWSControlTowerBlueprintAccess role in each member account.
ACD
Explanation:
The correct answer is A, C, and D. These steps will meet the requirements with the least operational overhead because:
• Step A will deploy an AWS Lambda function to the shared services account that can
automate the network infrastructure provisioning in each member account by assuming a role with the necessary permissions.
• Step C will create an AWS CloudFormation template that describes the VPC and the transit gateway attachment for each account. This template can be uploaded as an AWS Service Catalog
product to the shared services account, which can be used by the AWS Lambda function to create the network resources in each member account.
• Step D will deploy an Amazon EventBridge rule on a default event bus in the shared services account that can react to AWS Control Tower lifecycle events, such as creating a new managed account. This rule can invoke the AWS Lambda function to provision the network infrastructure in the new account.
The other steps are incorrect because:
• Step B will update the existing accounts with an Account Factory Customization (AFC), which is a feature of AWS Control Tower that allows you to customize the account creation process with AWS CloudFormation templates. However, this step will not automate the network infrastructure provisioning for the existing accounts, as it only applies to the new accounts created through the Account Factory. Moreover, this step will require additional operational overhead to maintain the AFC templates and products.
• Step E will create an AWSControlTowerBlueprintAccess role in the shared services account, which is a role that allows AWS Control Tower to access the AWS Service Catalog products in the shared services account. However, this step is not necessary for the automation solution, as the AWS Lambda function can access the AWS Service Catalog products directly without using this role.
• Step F will create an AWSControlTowerBlueprintAccess role in each member account, which is a role that allows AWS Control Tower to access the AWS Service Catalog products in the member accounts. However, this step is not necessary for the automation solution, as the AWS Lambda function can access the AWS Service Catalog products in the shared services account without using this role.
A company ran out of IP address space in one of the Availability Zones in an AWS Region that the company uses. The Availability Zone that is out of space is assigned the
A company uses the us-east-1 Region and the ap-south-1 Region for its business units (BUs). The BUs are named BU-1 and BU-2. For each BU. there are two VPCs in us-east-1 and one VPC in ap-south-1.
Because of workload isolation requirements, resources can communicate within the same BU but cannot communicate with resources in the other BU. The company plans to add more BUs and plans to expand into more Regions.
Which solution will meet these requirements with the MOST operational efficiency?
- A . Configure an AWS Cloud WAN network that operates in the required Regions Attach all BU VPCs to the AWS Cloud WAN core network. Update the AWS Cloud WAN segment actions to configure new routes to deny traffic between the different BU segments.
- B . Configure a transit gateway in each Region. Configure peering between the transit gateways. Attach the BU VPCs to the transit gateway in the corresponding Region. Configure the transit gateway and VPC route tables to isolate traffic between BU VPCs.
- C . Configure an AWS Cloud WAN network that operates in the required Regions. Attach all BU VPCs to the AWS Cloud WAN core network. Update the core network policy by setting the isolate-attachments parameter for each segment.
- D . Configure an AWS Cloud WAN network that operates in the required Regions. Create AWS Cloud WAN segments for each BU. Configure VPC attachments for each BU’s VPCs to the corresponding BU segment.