SAP C_S43_2023 Practice Exams
Last updated on Nov 16,2026- Exam Code: C_S43_2023
- Exam Name: SAP Certified Associate - SAP S/4HANA Cloud Private Edition, Asset Management
- Certification Provider: SAP
- Latest update: Nov 16,2026
What do you have to consider regarding a cross-plant planning scenario?
- A . Multiple maintenance plants are assigned to a planning plant (n: 1).
- B . Only a maximum number of five maintenance plants can be assigned to a planning plant.
- C . Multiple planning plants are assigned to a maintenance plant (m: 1).
- D . It is only possible within the same company code.
A
Explanation:
A cross-plant planning scenario is a special planning process that allows you to carry out material requirements planning for various plants centrally. This facilitates the production of a product in another plant and it also guarantees a smooth flow of materials between different plants. In a cross-plant planning scenario, you can assign multiple maintenance plants to a planning plant (n: 1) or multiple planning plants to a maintenance plant (m: 1). This means that you can plan and execute maintenance orders in different plants using a common planning plant or a common maintenance plant. There is no limit on the number of maintenance plants that can be assigned to a planning plant, so answer B is incorrect. A cross-plant planning scenario is also possible across different company codes, as long as the plants belong to the same controlling area. Therefore, answer D is also incorrect.
Reference: Cross-Plant Planning | SAP Help Portal and SAP S/4HANA Asset Management: Plants from a Maintenance … – SAP PRESS
What do you have to consider when setting up phase-based maintenance?
- A . It is mandatory for breakdown and preventive maintenance.
- B . It is not possible to configure the nine delivered phases.
- C . It can be used with any existing order type.
- D . It comes preconfigured when using the relevant Best Practices scope items.
B
Explanation:
Phase-based maintenance is a new concept introduced in SAP S/4HANA Cloud that allows you to track the life cycle of the maintenance processes using nine predefined phases and sub-phases. These phases are set up by SAP and you cannot change them. However, you can control the transition of phases using phase control codes. Phase-based maintenance is only applicable to the new order types Reactive Maintenance and Proactive Maintenance, which are delivered with the relevant Best Practices scope items. It is not mandatory for breakdown and preventive maintenance, nor can it be used with any existing order type.
Reference: New Phase Model for the Maintenance Processes in S/4HANA Cloud, Phase Model for the Maintenance Process, Maintenance Process
Phases, Explaining the Phase-based Process
You want to create a maintenance order with an external order operation that includes service items.
How can you achieve this? Note: There are 2 correct answers to this question
- A . The usage of a model service specification is mandatory.
- B . The assignment of a control key with the service indicator set is mandatory
- C . The actual value entry can be recorded only via the service entry sheet
- D . The assignment of a control key with key externally processed operation is sufficient.
What happens if you change the primary key of a functional location?
- A . The user must define a new labelling system for the new primary key.
- B . The functional location cannot be assigned to a new superior functional location when the new label is entered.
- C . Changing the superior functional location via alternative labeling is not possible.
- D . The user must decide whether the functional location is assigned to a new superior functional location.
D
Explanation:
Changing the primary key of a functional location means changing the label of the functional location. The label is the unique identifier of the functional location and it consists of a structure indicator and a functional location identification. The structure indicator defines the allowed characters and the hierarchy levels of the functional location structure. The functional location identification is the actual name of the functional location. When you change the primary key of a functional location, you can either change the structure indicator or the functional location identification, or both. If you change the structure indicator, you need to adjust the functional location identification accordingly. If you change the functional location identification, you need to decide whether the functional location is assigned to a new superior functional location or not. A superior functional location is the functional location that is directly above the current functional location in the hierarchy. For example, if you have a functional location FL-01-02-03, where FL is the structure indicator, 01 is the first level, 02 is the second level, and 03 is the third level, you can change the primary key to FL-01-02-04, which means changing the functional location identification within the same level. In this case, you need to decide whether the functional location is still assigned to FL-01-02 as the superior functional location or not. Alternatively, you can change the primary key to FL-01-03, which means changing the functional location identification to a different level. In this case, you need to decide whether the functional location is still assigned to FL-01 as the superior functional location or not.
The user does not need to define a new labelling system for the new primary key, as the labelling system is defined by the structure indicator, which can be reused for different functional locations. Therefore, answer A is incorrect. The functional location can be assigned to a new superior functional location when the new label is entered, as long as the new label is consistent with the structure indicator and the hierarchy rules. Therefore, answer B is also incorrect. Changing the superior functional location via alternative labeling is possible, as alternative labeling allows you to assign different labels to the same functional location. Therefore, answer C is also incorrect.
Reference: Explaining Technical Asset Structures – SAP Learning, Organizational Elements and Structures | SAP Help Portal, and SAP Alternative Labeling of Functional Locations.
What are characteristics of the structure indicator? Note: There are 2 correct answers to this question
- A . It limits the types of characters in the edit mask to Alpha and Numeric.
- B . It restricts the number of hierarchical levels to no more than 6
- C . It defines the allowed characters for a functional location
- D . It sets the hierarchy levels of the functional location structure.
C D
Explanation:
The structure indicator is a key that defines the allowed characters and the hierarchy levels of the functional location structure. It consists of an edit mask and a hierarchy indicator. The edit mask defines the allowed characters for each position of the functional location identification. The hierarchy indicator defines the hierarchy levels of the functional location structure and the number of characters for each level. For example, a structure indicator with the edit mask ANNNN-NNNN and the hierarchy indicator 5-4 means that the functional location identification can have up to 9 alphanumeric characters, divided into two levels with 5 and 4 characters respectively, separated by a hyphen. The structure indicator does not limit the types of characters to alpha and numeric, as it can also include special characters, such as hyphens, slashes, or dots. Therefore, answer A is incorrect. The structure indicator also does not restrict the number of hierarchical levels to no more than 6, as it can have up to 10 levels. Therefore, answer B is also incorrect.
Reference: Explaining Technical Asset Structures – SAP Learning and Organizational Elements and Structures | SAP Help Portal.
How do you map a counter replacement in SAP S/4HANA Asset Management?
- A . Deactivate the current counter and create a new counter.
- B . Create a new measurement document marked as a counter replacement.
- C . Create a new measurement document and assign a valuation code for counter replacement.
- D . Assign a catalogue type for counter replacement to the measuring point category.
Which of the following objects can you directly assign when you define the work center? Note: There are 2 correct answers to this question.
- A . Calculation key
- B . Planner group
- C . Capacity category
- D . Organizational unit (HR)
What do you have to consider when implementing Ul technologies in SAP S/4HANA Asset Management? Note: There are 2 correct answers to this question
- A . Web Dynpro apps can be used in the SAP Fiori Launchpad.
- B . SAP Fiori Launchpad supports only SAPUIS apps.
- C . SAP GUI for HTML can be used in the SAP Fiori Launchpad.
- D . The cloud version can also use SAP GUI for Windows.
A C
Explanation:
When implementing UI technologies in SAP S/4HANA Asset Management, you have to consider the following points:
Web Dynpro apps can be used in the SAP Fiori Launchpad. This is true because Web Dynpro is one of the UI technologies that are supported by the SAP Fiori Launchpad, along with SAP Fiori apps, SAP GUI for HTML, and WebClient UI12.
SAP Fiori Launchpad supports only SAPUI5 apps. This is false because SAP Fiori Launchpad supports not only SAPUI5 apps, but also other UI technologies such as Web Dynpro, SAP GUI for HTML, and WebClient UI12.
SAP GUI for HTML can be used in the SAP Fiori Launchpad. This is true because SAP GUI for HTML is one of the UI technologies that are supported by the SAP Fiori Launchpad, along with SAP Fiori apps, Web Dynpro, and WebClient UI12.
The cloud version can also use SAP GUI for Windows. This is false because SAP GUI for Windows is only available for the on-premise version of SAP S/4HANA Asset Management, not for the cloud version31.
Reference: 3: Explaining the Intelligent Enterprise – SAP Learning 1: UI Technology Guide for SAP
S/4HANA 1909 – SAP Online Help 2: SAP S/4HANA UI Technology | SAP Help Portal
Which of the below objects can you assign in a notification item? Note: There are 2 correct answers to this question
- A . Only one object part
- B . One or more causes of damage.
- C . Only one cause of damage
- D . One or more object parts
BD
Explanation:
A notification item is used to describe a problem, damage, or the activity executed in greater detail. A notification item can be assigned to one or more object parts and one or more causes of damage. An object part is a component of a technical object that is affected by a malfunction or damage. A cause of damage is a factor that leads to a malfunction or damage. You can use catalogs to enter object parts and causes of damage in a coded form. Therefore, the correct answers are B and D.
Reference: SAP Help Portal – Notification Item
SAP Help Portal – Object Part
SAP Help Portal – Cause of Damage
[SAP Learning – Creating Notifications]
Which options do you have in SAP S/4HANA Asset Management, Public Cloud Edition? Note: There are 2 correct answers to this question
- A . You can configure SAP S/4HANA Cloud via the self-service configuration UI.
- B . You have access to the SAP S/4HANA back-end system
- C . You can configure SAP S/4HANA Cloud via the SAP Asset Intelligence Network
- D . You do NOT have access to the SAP S/4HANA back-end system.
A D
Explanation:
SAP S/4HANA Asset Management, Public Cloud Edition is a cloud-based solution that offers a simplified and standardized configuration of the system via the self-service configuration UI. You can use this UI to adjust the system settings according to your business needs. You do not have access to the SAP S/4HANA back-end system, as it is managed by SAP. SAP Asset Intelligence Network is a separate cloud-based solution that connects manufacturers, operators, and service providers of physical assets. You can use SAP Asset Intelligence Network to share and exchange asset information, but you cannot use it to configure SAP S/4HANA Cloud.
Reference: SAP S/4HANA Cloud, Public Edition – SAP Learning
SAP S/4HANA Cloud for Asset Management, Public Edition