Paloalto Networks NGFW Engineer Practice Exams
Last updated on Oct 21,2026- Exam Code: NGFW Engineer
- Exam Name: Palo Alto Networks Next-Generation Firewall Engineer
- Certification Provider: Paloalto Networks
- Latest update: Oct 21,2026
Question #1
For which two purposes is an IP address configured on a tunnel interface? (Choose two.)
- A . Use of dynamic routing protocols
- B . Tunnel monitoring
- C . Use of peer IP
- D . Redistribution of User-ID
Correct Answer: A, B
A, B
Explanation:
Use of dynamic routing protocols: An IP address is needed on the tunnel interface to participate in dynamic routing protocols (like OSPF, BGP, etc.) over the tunnel. This allows the firewall to advertise routes and receive updates over the tunnel.
Tunnel monitoring: The IP address on the tunnel interface can also be used for monitoring the tunnel’s status. Tunnel monitoring (such as IPSec tunnel monitoring) requires an IP address on the tunnel interface to check the health and availability of the tunnel.
A, B
Explanation:
Use of dynamic routing protocols: An IP address is needed on the tunnel interface to participate in dynamic routing protocols (like OSPF, BGP, etc.) over the tunnel. This allows the firewall to advertise routes and receive updates over the tunnel.
Tunnel monitoring: The IP address on the tunnel interface can also be used for monitoring the tunnel’s status. Tunnel monitoring (such as IPSec tunnel monitoring) requires an IP address on the tunnel interface to check the health and availability of the tunnel.
Question #2
Which statement applies to Log Collector Groups?
- A . Log redundancy is available only if each Log Collector has the same amount of total disk storage.
- B . Enabling redundancy increases the log processing traffic in a Collector Group by 50%.
- C . In any single Collector Group, all the Log Collectors must run on the same Panorama model.
- D . The maximum number of Log Collectors in a Log Collector Group is 18 plus two hot spares.
Correct Answer: D
D
Explanation:
The maximum number of Log Collectors that can be added to a Log Collector Group is 18 plus 2 hot spares, ensuring redundancy and availability in case of failure. This allows for a total of up to 20 Log Collectors in a group, providing sufficient scalability and reliability for log collection.
D
Explanation:
The maximum number of Log Collectors that can be added to a Log Collector Group is 18 plus 2 hot spares, ensuring redundancy and availability in case of failure. This allows for a total of up to 20 Log Collectors in a group, providing sufficient scalability and reliability for log collection.
Question #3
Which two zone types are valid when configuring a new security zone? (Choose two.)
- A . Tunnel
- B . Intrazone
- C . Internal
- D . Virtual Wire
Correct Answer: A, D
A, D
Explanation:
When configuring a new security zone on a Palo Alto Networks firewall, the two valid zone types are:
Tunnel: A Tunnel zone is used for traffic that is associated with a VPN tunnel, such as IPSec tunnels.
Traffic passing through a tunnel interface is classified into this zone.
Virtual Wire: A Virtual Wire zone is used when a firewall operates in transparent mode (also known as Layer 2 mode). In this configuration, the firewall can inspect traffic without modifying the IP address structure of the network.
A, D
Explanation:
When configuring a new security zone on a Palo Alto Networks firewall, the two valid zone types are:
Tunnel: A Tunnel zone is used for traffic that is associated with a VPN tunnel, such as IPSec tunnels.
Traffic passing through a tunnel interface is classified into this zone.
Virtual Wire: A Virtual Wire zone is used when a firewall operates in transparent mode (also known as Layer 2 mode). In this configuration, the firewall can inspect traffic without modifying the IP address structure of the network.
Question #4
A multinational organization wants to use the Cloud Identity Engine (CIE) to aggregate identity data from multiple sources (on premises AD, Azure AD, Okta) while enforcing strict data isolation for different regional business units. Each region’s firewalls, managed via Panorama, must only receive the user and group information relevant to that region. The organization aims to minimize administrative overhead while meeting data sovereignty requirements.
Which approach achieves this segmentation of identity data?
- A . Create one CIE tenant, aggregate all identity data into a single view, and redistribute the full dataset to all firewalls. Rely on per-firewall Security policies to restrict access to out-of-scope user and group information.
- B . Establish separate CIE tenants for each business unit, integrating each tenant with the relevant identity sources. Redistribute user and group data from each tenant only to the region’s firewalls, maintaining a strict one-to-one mapping of tenant to business unit.
- C . Disable redistribution of identity data entirely. Instead, configure each regional firewall to pull user and group details directly from its local identity providers (IdPs).
- D . Deploy a single CIE tenant that collects all identity data, then configure segments within the tenant to filter and redistribute only the relevant user/group sets to each regional firewall group.
Correct Answer: B
B
Explanation:
To meet the requirement of data isolation for different regional business units while minimizing administrative overhead, the best approach is to establish separate Cloud Identity Engine (CIE) tenants for each business unit. Each tenant would be integrated with the relevant identity sources (such as on-premises AD, Azure AD, and Okta) for that specific region. This ensures that the identity data for each region is kept isolated and only relevant user and group data is distributed to the respective regional firewalls.
By maintaining a strict one-to-one mapping between CIE tenants and business units, the organization ensures that each region’s firewall only receives the user and group data relevant to that region, thus meeting data sovereignty requirements and minimizing administrative complexity.
B
Explanation:
To meet the requirement of data isolation for different regional business units while minimizing administrative overhead, the best approach is to establish separate Cloud Identity Engine (CIE) tenants for each business unit. Each tenant would be integrated with the relevant identity sources (such as on-premises AD, Azure AD, and Okta) for that specific region. This ensures that the identity data for each region is kept isolated and only relevant user and group data is distributed to the respective regional firewalls.
By maintaining a strict one-to-one mapping between CIE tenants and business units, the organization ensures that each region’s firewall only receives the user and group data relevant to that region, thus meeting data sovereignty requirements and minimizing administrative complexity.
Question #5
Which type of firewall resource can be assigned when configuring a new firewall virtual system (VSYS)?
- A . ICPU
- B . Sessions limit
- C . Memory
- D . Security profile limit
Correct Answer: B
B
Explanation:
When configuring a new firewall virtual system (VSYS) on a Palo Alto Networks firewall, one of the resources that can be assigned is the sessions limit. This setting allows the administrator to control the number of active sessions that can be handled by the VSYS, ensuring that each virtual system has an appropriate allocation of resources based on its needs.
B
Explanation:
When configuring a new firewall virtual system (VSYS) on a Palo Alto Networks firewall, one of the resources that can be assigned is the sessions limit. This setting allows the administrator to control the number of active sessions that can be handled by the VSYS, ensuring that each virtual system has an appropriate allocation of resources based on its needs.
Question #6
Which set of options is available for detailed logs when building a custom report on a Palo Alto Networks NGFW?
- A . Traffic, User-ID, URL
- B . Traffic, threat, data filtering, User-ID
- C . GlobalProtect, traffic, application statistics
- D . Threat, GlobalProtect, application statistics, WildFire submissions
Correct Answer: B
B
Explanation:
When building a custom report on a Palo Alto Networks NGFW, you can select detailed logs that provide specific insights into various aspects of firewall activity.
The available options for detailed logs typically include:
Traffic logs: These provide information on the network traffic passing through the firewall.
Threat logs: These logs capture data related to identified security threats, such as malware or intrusion attempts.
Data filtering logs: These logs capture events related to data filtering policies, such as preventing the transfer of sensitive data.
User-ID logs: These logs associate user identities with the traffic and activities observed on the firewall, enabling user-based policy enforcement.
B
Explanation:
When building a custom report on a Palo Alto Networks NGFW, you can select detailed logs that provide specific insights into various aspects of firewall activity.
The available options for detailed logs typically include:
Traffic logs: These provide information on the network traffic passing through the firewall.
Threat logs: These logs capture data related to identified security threats, such as malware or intrusion attempts.
Data filtering logs: These logs capture events related to data filtering policies, such as preventing the transfer of sensitive data.
User-ID logs: These logs associate user identities with the traffic and activities observed on the firewall, enabling user-based policy enforcement.
Question #7
A large enterprise wants to implement certificate-based authentication for both users and devices, using an on-premises Microsoft Active Directory Certificate Services (AD CS) hierarchy as the primary certificate authority (CA). The enterprise also requires Online Certificate Status Protocol (OCSP) checks to ensure efficient revocation status updates and reduce the overhead on its NGFWs. The environment includes multiple Active Directory forests, Panorama management for several geographically dispersed firewalls, GlobalProtect portals and gateways needing distinct certificate profiles for users and devices, and strict Security policies demanding frequent revocation checks with minimal latency.
Which approach best addresses these requirements while maintaining consistent policy enforcement?
- A . Deploy self-signed certificates at each site to simplify local certificate validation and reduce dependencies on a centralized CA. Turn off certificate revocation checks for lower overhead, rely on IP-based rules for GlobalProtect authentication, and use a single certificate profile for both users and devices.
- B . Distribute the root and intermediate CA certificates via Panorama as shared objects to ensure all firewalls have a consistent trust chain. Configure OCSP responder profiles on each firewall to offload revocation checks to an internal OCSP server while keeping CRL checks as a fallback. Maintain separate certificate profiles for user and device authentication and use an automated enrollment method C such as Group Policy or SCEP C to deploy certificates to endpoints.
- C . Configure each firewall independently to trust the root and intermediate CA certificates. Rely only on manual CRL checks for certificate revocation, and import both user and device certificates directly into each firewall’s local certificate store for authentication.
- D . Obtain wildcard certificates from a public CA for both user and device authentication, and configure firewalls to perform CRL polling at the default update interval. Manually install user certificates on endpoints and synchronize firewall certificate stores through frequent manual SSH updates to maintain consistency.
Correct Answer: B
B
Explanation:
This approach best addresses the enterprise’s requirements for certificate-based authentication,
OCSP checks, and consistent policy enforcement:
Distributing the root and intermediate CA certificates via Panorama ensures that all firewalls in the enterprise are consistent in their trust chain and can validate certificates properly.
Configuring OCSP responder profiles on each firewall offloads the revocation checks to an internal OCSP server, which reduces the overhead on the firewalls and ensures fast, real-time certificate status checks.
Using CRL checks as a fallback ensures reliability in case the OCSP responder is unavailable. Separate certificate profiles for users and devices ensure that the firewall can enforce different security policies based on the type of certificate (user vs. device).
Automated certificate enrollment methods such as Group Policy or SCEP streamline certificate distribution to endpoints, ensuring efficient management of certificates across geographically dispersed firewalls.
B
Explanation:
This approach best addresses the enterprise’s requirements for certificate-based authentication,
OCSP checks, and consistent policy enforcement:
Distributing the root and intermediate CA certificates via Panorama ensures that all firewalls in the enterprise are consistent in their trust chain and can validate certificates properly.
Configuring OCSP responder profiles on each firewall offloads the revocation checks to an internal OCSP server, which reduces the overhead on the firewalls and ensures fast, real-time certificate status checks.
Using CRL checks as a fallback ensures reliability in case the OCSP responder is unavailable. Separate certificate profiles for users and devices ensure that the firewall can enforce different security policies based on the type of certificate (user vs. device).
Automated certificate enrollment methods such as Group Policy or SCEP streamline certificate distribution to endpoints, ensuring efficient management of certificates across geographically dispersed firewalls.
Question #8
Which interface types should be used to configure link monitoring for a high availability (HA) deployment on a Palo Alto Networks NGFW?
- A . HA, Virtual Wire, and Layer 2
- B . Tap, Virtual Wire, and Layer 3
- C . Virtual Wire, Layer 2, and Layer 3
- D . HA, Layer 2. and Layer 3
Correct Answer: C
C
Explanation:
When configuring link monitoring for high availability (HA) on a Palo Alto Networks NGFW, the following interface types are supported:
Virtual Wire: Used when you have a transparent mode firewall deployment, where the firewall operates at Layer 2 to monitor traffic between two network segments.
Layer 2: Also used in transparent mode, where the firewall operates as a Layer 2 device and can be configured for link monitoring.
Layer 3: Used in routed mode, where the firewall is involved in routing traffic and can also be configured to monitor links.
C
Explanation:
When configuring link monitoring for high availability (HA) on a Palo Alto Networks NGFW, the following interface types are supported:
Virtual Wire: Used when you have a transparent mode firewall deployment, where the firewall operates at Layer 2 to monitor traffic between two network segments.
Layer 2: Also used in transparent mode, where the firewall operates as a Layer 2 device and can be configured for link monitoring.
Layer 3: Used in routed mode, where the firewall is involved in routing traffic and can also be configured to monitor links.
Question #9
Palo Alto Networks NGFWs use SSL/TLS profiles to secure which two types of connections? (Choose two.)
- A . NAT tables
- B . User Authentication
- C . GlobalProtect Gateways
- D . GlobalProtect Portal
Correct Answer: C, D
C, D
Explanation:
Palo Alto Networks Next-Generation Firewalls (NGFWs) use SSL/TLS profiles to secure connections for services such as GlobalProtect Gateways and GlobalProtect Portals. These profiles are used to manage the SSL/TLS encryption and decryption for secure communication between the firewall and clients (such as VPN clients for GlobalProtect). This helps ensure the confidentiality and integrity of the data during transmission.
C, D
Explanation:
Palo Alto Networks Next-Generation Firewalls (NGFWs) use SSL/TLS profiles to secure connections for services such as GlobalProtect Gateways and GlobalProtect Portals. These profiles are used to manage the SSL/TLS encryption and decryption for secure communication between the firewall and clients (such as VPN clients for GlobalProtect). This helps ensure the confidentiality and integrity of the data during transmission.
Question #10
What is the purpose of assigning an Admin Role Profile to a user in a Palo Alto Networks NGFW?
- A . Allow access to all resources without restrictions.
- B . Enable multi-factor authentication (MFA) for administrator access.
- C . Define granular permissions for management tasks.
- D . Restrict access to sensitive report data.
Correct Answer: C
C
Explanation:
Assigning an Admin Role Profile to a user in a Palo Alto Networks NGFW is used to define granular permissions for management tasks. This allows administrators to control what actions a user can perform on the firewall, such as configuration changes, monitoring, and logging. By assigning different admin roles, you can ensure that users have access only to the areas and tasks they need, enforcing the principle of least privilege.
C
Explanation:
Assigning an Admin Role Profile to a user in a Palo Alto Networks NGFW is used to define granular permissions for management tasks. This allows administrators to control what actions a user can perform on the firewall, such as configuration changes, monitoring, and logging. By assigning different admin roles, you can ensure that users have access only to the areas and tasks they need, enforcing the principle of least privilege.