Huawei H35-580_V2.0 Practice Exams
Last updated on Oct 23,2026- Exam Code: H35-580_V2.0
- Exam Name: HCIA-5G-RNP&RNO V2.0
- Certification Provider: Huawei
- Latest update: Oct 23,2026
When using NR to cover high-rise buildings, which of the following is the recommended configuration for NR broadcast beam scenario?
- A . SCENARIO_6
- B . SCENARIO_13
- C . SCENARIO_1
- D . SCENARIO_0
B
to do time-frequency tracking in 5G low-frequency scenarios, PTRS is not required in low-frequency scenarios.
Which of the following data and signaling dispatching base stations will use QPSK modulation? (Multiple choice)
- A . RRC message
- B . SIB Message
- C . VoR voice data packet
- D . NAS message
Which of the following descriptions of the peak test environment are correct? (Multiple choice)
- A . Uplink peak test requires a straight path environment
- B . Downlink peak test requires a downlink multipath environment
- C . Avoid neighboring SSB and TRS interference
- D . RSRP at the test location must be higher than -65dBm
In 5G SA networking, if OSI is configured in a cell, in which message will the OSI information be indicated?
- A . SIB3
- B . SIB2
- C . SIB1
- D . MIB
In the Option 3x networking scenario, which of the following scenarios will cause call drops on the 5G side? (Multiple choice)
- A . X2 link failure
- B . Handover process initiated by LTE side
- C . 5G neighboring cell missing
- D . LTE side initiates RRC reestablishment
Which of the following descriptions of the advantages of Cloud VR head-end equipment are correct? (Multiple choice)
- A . Support various types of terminal access
- B . The head display is cordless, making it easy to access anytime, anywhere
- C . Cloud rendering reduces the requirements for terminals and the threshold becomes lower
- D . Immersive experience, can present the scene more intuitively
Which network element evaluates and judges the measurement results during the PSCell change process?
- A . eNodeB
- B . EPC
- C . UE
- D . gNodeB
During the data transmission test, it was found that the commercial terminal always maintained RANK4 but the MCS was very low. What might be the cause?
- A . The multipath channel correlation is too strong
- B . RANK parameters are fixed
- C . Poor air quality
- D . MCS parameter setting error
If the maximum transmission power of the cell is 100W, SCS = 30kHZ, the bandwidth is 100MHZ, and the AAU of 64T64R is used, what is the approximate reference power of the cell?
- A . 31.9dBm
- B . -3.
- C . 0dbm
- D . 34dbm
If PS handover from 5G to 4G needs to be supported, what interface must be deployed between 5GC and EPC?
- A . N2
- B . N26
- C . N10
- D . N20