Huawei H31-311_V2.5 Practice Exams
Last updated on Nov 16,2026- Exam Code: H31-311_V2.5
- Exam Name: HCIA-Transmission V2.5
- Certification Provider: Huawei
- Latest update: Nov 16,2026
When setting the LCAS mode, please follow the following principles: 1. If the devices at both ends are Huawei devices, please set them to "Standard Mode" 2. If Huawei devices are interconnected with third-party devices, please set the interconnected devices to the same mode according to the mode supported by the third-party devices.
- A . True
- B . False
Physical port: also known as MAC port, which is the external port of the board.
- A . True
- B . False
Modulation is the process of processing the information of the signal source and adding it to the carrier to make it suitable for channel transmission. It is a technology that changes the carrier with the signal. There are two types of modulated signals, namely analog signals and digital signals. Using analog signals to control the change of carrier parameters is called analog modulation; using data signals to control the change of carrier signal parameters is called digital modulation.
- A . True
- B . False
When the ACT indicator light of the SDH board is off, it means that the board has a hardware failure and cannot be used.
- A . True
- B . False
SDH signals must be scrambled before transmission over optical fiber.
Which of the following bytes is not scrambled? (Multiple choice)
- A . A1
- B . A2
- C . J0
- D . J1
The optical amplifier unit can compensate for line loss and increase transmission distance. Through multi-stage cascading, the system transmission distance can be extended to infinity.
- A . True
- B . False
Which of the following descriptions about the FIU board is correct?
- A . The FIU board processes monitoring information.
- B . FIU can complete the access and extraction of OSC channels.
- C . In the OptiX OSN8800 equipment, when there is no signal input, the FIU board will report an alarm.
- D . Whether it is an OLA station or an OADM station, one station only needs one FIU.
On the two-fiber bidirectional multiplex section protection ring, the first half of the VC-4 of each STM-N line is the working channel, and the second half of the VC-4 is the protection channel.
- A . True
- B . False
Which of the following options is emitted from an ordinary light source, which has all possible vibration directions and is symmetrical to the direction of light propagation?
- A . Natural light
- B . Polarized light
- C . Polarization
- D . Polarization