Huawei H31-311_V2.5 Practice Exams
Last updated on Nov 16,2026- Exam Code: H31-311_V2.5
- Exam Name: HCIA-Transmission V2.5
- Certification Provider: Huawei
- Latest update: Nov 16,2026
Forced switching, fiber switching, manual switching and motion switching are in descending order of priority.
- A . True
- B . False
Which of the following statements about overhead bytes is wrong?
- A . A1 and A2 are framing bytes. These bytes are used to separate STM-1 frames in the signal stream.
- B . JO is the regenerator section tracking byte. This byte is used to repeatedly transmit the segment access point identifier so that the receiving end can verify its continuous connection with the specified transmitting end.
- C . B1 is Bit Interleaved Parity-8 (BIP-8). This byte is used to monitor bit errors in the regenerator layer.
- D . E1 and E2 are wire bytes. These bytes are used to provide a voice channel for order line connections.
TTL, time to live, is mainly used to limit the number of hops that an IP data packet can pass through the router in the network. If TTL=1, it means that the data packet can only be transmitted in its own LAN.
- A . True
- B . False
In the system control unit, which of the following databases will not lose data after a power failure? (Multiple choice)
- A . MDB
- B . DRDB
- C . FDBO
- D . FDB1
Some SNCP protection switching conditions are default, such as AUAIS and TUAS. Other conditions are optional, such as HP-TIM and HP-SLM. Optional conditions can be flexibly set according to the service level.
- A . True
- B . False
Which of the following statements about 1+1 protection of cross-connection board are correct? (Multiple choice)
- A . The source service board sends services to the active and standby cross-connect boards
- B . After the service cross-connection is completed, the active and standby cross-connect boards send the data of the active cross-connect board to the receiving service board.
- C . The receiving service board can only receive data from the active cross-connect board.
- D . The buses of the two cross-connected modules operate independently and do not interfere with each other.
- E . The E dual bus system structure indicates that the service board performs dual data feeding to the cross-connection side and selectively receives data on the cross-connection side.
- F . The two cross-connect boards have the same configuration. The service board will selectively receive service from one of them based on the quality of service and the status of the cross-connect board.
In the network interface of OTN, the network interface within the same operator is the intra-domain interface, which is further divided into the interface between equipment from different manufacturers, IaVI, and the interface within the subnet of equipment from the same manufacturer, IrVI, according to the different equipment manufacturers.
- A . True
- B . False
After TCM monitoring is enabled, when the upstream station detects a LOF alarm, it will insert IAE and the local end will report the ODU1_TCMn_IAES performance event.
- A . True
- B . False
Users can easily access NCE through a browser without having to install additional traditional client software.
- A . True
- B . False
How many frames is the minimum interval between two adjacent pointer adjustment events?
- A . 3
- B . 4
- C . 2
- D . 5