Huawei H31-311_V2.5 Practice Exams
Last updated on Nov 16,2026- Exam Code: H31-311_V2.5
- Exam Name: HCIA-Transmission V2.5
- Certification Provider: Huawei
- Latest update: Nov 16,2026
Coherent reception uses a local oscillator laser of the same frequency to coherently receive the optical signal. Which of the following information can be recovered from the received signal? (Multiple choice)
- A . Frequency
- B . Polarization state
- C . Amplitude
- D . Phase
By default, a B2-EXC alarm is reported when the number of B2 bit errors exceeds the () threshold.
- A . 0000000001
- B . 0.00001
- C . 0.001
- D . 0.01
K1 and K2 bytes can transmit APS switching signaling and can also indicate the failure of the signal in the multiplexing segment.
- A . True
- B . False
After configuring PDH services on a per-network element basis, a complete trace cannot be searched. Which of the following is a possible reason? (Multiple choice)
- A . Wrong selection of branch plate
- B . Wrong circuit board selection
- C . The time period is wrongly configured
- D . No direct access is configured at the intermediate site
Half-duplex mode must have a conflict detection and avoidance mechanism to prevent multiple devices from occupying the line at the same time. This mechanism is the so-called CSMA/CD, and its Chinese name is Carrier Sense Multiple Access / Collision Detection.
- A . True
- B . False
Two beams of light that meet the coherence condition are called coherent light. Which of the following options are referred to as the coherence condition here? (Multiple choice)
- A . Vibration direction is the same
- B . The vibration amplitude is the same
- C . The phase is the same or the phase difference remains constant
- D . Same vibration frequency
When the optical fiber is connected but the business is not available, E1 or E2 bytes can be used for official communication between the sites.
- A . True
- B . False
Which of the following descriptions about solving the system OSNR limitation problem are correct? (Multiple choice)
- A . Use advanced modulation and coding technology to reduce the baud rate and improve OSNR tolerance.
- B . Use the local oscillator laser of the same frequency to interfere with the received optical signal to improve the OSNR tolerance
- C . Enhanced HFEC error correction coding is used to improve OSNR by nearly 1 dB compared to AFEC.
- D . Use low noise figure NF, high performance EDFA and Ramani amplifier board, such as N13OAU1O6 or TN11RAU106, to improve the receiving OSNR of the system.
TPS protection belongs to single-board level protection, and its switching process does not require the participation of the cross-board.
- A . True
- B . False
The user adjusts the service bandwidth in real time. The NCE control unit sends the new bandwidth to the device and adjusts the CIR and PIR of the service PW. The service will not be interrupted during the adjustment.
- A . True
- B . False