Huawei H12-323_V2.0-ENU Practice Exams
Last updated on Oct 22,2026- Exam Code: H12-323_V2.0-ENU
- Exam Name: HCIP-WLAN V2.0
- Certification Provider: Huawei
- Latest update: Oct 22,2026
Configuration optimization is mainly carried out on software features, and the user experience is improved by adjusting the configuration parameters of the wireless optimization function.
Which of the following wireless features can be used to improve the user network experience? (Multiple choice)
- A . Weak signal user access control
- B . Airtime Scheduling
- C . RF Tuning
- D . Smart Roaming
Which of the following WAC high-reliability networking methods can support WAC remote deployment? (Multiple choice)
- A . Dual-link cold backup
- B . VRRP hot backup
- C . N+1 backup
- D . Dual-link hot backup
If all indicators of the AP are always off, it is possible that the indicator light is currently configured to be turned off. It is recommended to configure the undoledoff command on the wireless controller to turn on the indicator light and then reset the indicator light status.
- A . True
- B . False
Redundant radio frequencies in WLAN networks will cause co-channel interference and waste network capacity.
Therefore, which of the following processing strategies does Huawei wireless controller support for redundant radios? (Multiple choice)
- A . Switch the Yushe RF to monitor mode
- B . Keep the remaining radios silent (do not send messages)
- C . Switch the redundant radio to the 5G radio
- D . Turn off redundant radio
Which of the following descriptions about dual-link cold backup and N+1 backup are wrong? (Multiple choice)
- A . In the process of active/standby switching, the wireless service will not be interrupted in dual-link cold backup, while in the process of active/standby switching, the wireless service will be interrupted briefly in N+1 backup.
- B . In dual-link cold backup and N+1 backup scenarios, the AP needs to establish two CAPWAP slave channels at the same time.
- C . Dual-link cold backup and N+1 backup, WAC does not back up synchronization information
- D . For dual-link backup and N+1 backup, the active/standby switchover will only be performed after the CAPWAP link is detected and the timeout occurs.
Which of the following descriptions of Huawei terminal plug-in test solutions is wrong?
- A . The terminal needs to install a special "dial test APP" on the mobile phone to collect data
- B . CampusInsight is used as the background analysis tool, which is responsible for receiving and analyzing the data reported by the APP.
- C . Terminal dial test is a test method for network link quality, which detects Wi-Fi user experience, network quality, link status and other information
- D . Xserver acts as a data site, providing intranet test platform, vMos test plug-in, etc.
To improve user experience, engineers configure the roaming function on the wireless controller and specify that the smart roaming function is triggered by detecting the terminal rate. Which of the following configuration commands is correct?
- A . [WAC-wlan-view] rrm-profile name smart-roam
[ WAC-wlan-rrm-prof -smart-roam] smart-roam enable
[WAC-wlan-rrm-prof-smart-roam] smart-roam roam-threshold check-rate - B . WAC-wlan-view] vap-profile name smart-roam
[WAC-wlan-vap-prof-smart-roam] smart-roam enable
[WAC-wlan-vap-prof-smart-roam] smart-roam roam-threshold check- rate - C . WAC-wlan-view] vap-profile name smart-roam
[WAC-wlan-vap-prof-smart-roam] undo smart-roam disable
[WAC-wlan-vap-prof-smart-roam] smart-roam roam-threshold check-snr - D . WAC-wlan-view] rrm- profile name smart -roam
[WAC-wlan-rrm-prof-smart-roam] smart-roam enable
[WAC-wlan-rrm-prof-smart-roam] smart-roam roam-threshold check-snr
Redundant radio frequencies in WLAN networks will cause co-frequency interference and waste network capacity. Therefore, the following processing strategies can be adopted for redundant radio frequencies: switch to 5G mode, switch to () mode or turn off the radio frequency.
Huawei CloudCampus APP tool modules mainly include project delivery, coverage testing, business testing, scenario testing, performance testing and manufacturer customization functions
- A . True
- B . False
When a company deploys a WLAN network in an office scenario, it will plan the WLAN network in advance. The purpose is to ensure that there are no blind spots in the wireless network coverage, ensure the user’s Internet access speed, and improve the office network experience.
- A . True
- B . False