HP HPE7-A02 Practice Exams
Last updated on Oct 22,2026- Exam Code: HPE7-A02
- Exam Name: HPE Network Security Professional Exam
- Certification Provider: HP
- Latest update: Oct 22,2026
Question #11
What is a typical use case for using HPE Aruba Networking ClearPass Onboard to provision devices?
- A . Enabling unmanaged devices to succeed at certificate-based 802.1X
- B . Enabling managed Windows domain computers to succeed at certificate-based 802.1X
- C . Enhancing security for loT devices that need to authenticate with MAC-Auth
- D . Enforcing posture-based assessment on managed Windows domain computers
Correct Answer: A
A
Explanation:
A typical use case for using HPE Aruba Networking ClearPass Onboard is to provision unmanaged
devices to succeed at certificate-based 802.1X authentication. ClearPass Onboard allows users to securely configure their personal devices with the necessary certificates and network settings to authenticate on the network using 802.1X, which enhances security and simplifies the onboarding process for unmanaged devices.
A
Explanation:
A typical use case for using HPE Aruba Networking ClearPass Onboard is to provision unmanaged
devices to succeed at certificate-based 802.1X authentication. ClearPass Onboard allows users to securely configure their personal devices with the necessary certificates and network settings to authenticate on the network using 802.1X, which enhances security and simplifies the onboarding process for unmanaged devices.
Question #12
A company uses HPE Aruba Networking ClearPass Device Insight (CPDI) (the standalone application option). In the details for a generic device cluster, you see a recommendation for "Windows 8/10" with 70% accuracy.
What does this mean?
- A . CPDI has detected that these devices match about 70% of the system rule for defining "Windows 8/10" devices.
- B . CPDI has matched these devices against several, conflicting system rules. 70% of those rules are for "Windows 8/10" devices.
- C . CPDI has grouped this cluster with similar classified devices. 70% of those classified devices are "Windows 8/10."
- D . CPDI has used MAC OUI to group these devices together. The average device’s MAC address matches 70% of the "Windows 8/10" OUI.
Correct Answer: A
A
Explanation:
When HPE Aruba Networking ClearPass Device Insight (CPDI) shows a recommendation for "Windows 8/10" with 70% accuracy for a generic device cluster, it means that CPDI has detected that these devices match about 70% of the system rule criteria for defining "Windows 8/10" devices. This percentage indicates the confidence level based on the observed characteristics and behavior of the devices, helping administrators understand the likelihood that these devices are indeed running Windows 8 or 10.
Reference: ClearPass Device Insight documentation provides details on how device classification and accuracy percentages are determined, explaining the matching process against system rules.
A
Explanation:
When HPE Aruba Networking ClearPass Device Insight (CPDI) shows a recommendation for "Windows 8/10" with 70% accuracy for a generic device cluster, it means that CPDI has detected that these devices match about 70% of the system rule criteria for defining "Windows 8/10" devices. This percentage indicates the confidence level based on the observed characteristics and behavior of the devices, helping administrators understand the likelihood that these devices are indeed running Windows 8 or 10.
Reference: ClearPass Device Insight documentation provides details on how device classification and accuracy percentages are determined, explaining the matching process against system rules.
Question #13
You have configured an AOS-CX switch to implement 802.1X on edge ports. Assume ports operate in the default auth-mode. VoIP phones are assigned to the "voice" role and need to send traffic that is tagged for VLAN 12.
Where should you configure VLAN 12?
- A . As the trunk native VLAN on edge ports and the trunk native VLAN on the "voice" role.
- B . As the allowed trunk VLAN in the "voice" role (and not in the edge port settings).
- C . As a trunk allowed VLAN on edge ports and the trunk native VLAN in the "voice" role.
- D . As the trunk native VLAN in the "voice" role (and not in the edge port settings).
Correct Answer: B
B
Explanation:
Voice Role VLAN Configuration:
When VoIP phones are authenticated and assigned to the "voice" role, VLAN 12 should be explicitly defined as an allowed trunk VLAN within the role configuration.
The VLAN configuration should be role-specific rather than on the edge port, as this ensures dynamic
VLAN assignment based on authentication results.
Option Analysis:
Option A: Incorrect. Native VLANs are for untagged traffic, but VoIP traffic is tagged.
Option B: Correct. VLAN 12 must be configured as the allowed trunk VLAN in the "voice" role to tag VoIP traffic correctly.
Option C: Incorrect. Configuring VLAN 12 in both edge port and role settings is redundant and unnecessary.
Option D: Incorrect. Native VLANs do not handle tagged traffic like VLAN 12 for VoIP phones.
B
Explanation:
Voice Role VLAN Configuration:
When VoIP phones are authenticated and assigned to the "voice" role, VLAN 12 should be explicitly defined as an allowed trunk VLAN within the role configuration.
The VLAN configuration should be role-specific rather than on the edge port, as this ensures dynamic
VLAN assignment based on authentication results.
Option Analysis:
Option A: Incorrect. Native VLANs are for untagged traffic, but VoIP traffic is tagged.
Option B: Correct. VLAN 12 must be configured as the allowed trunk VLAN in the "voice" role to tag VoIP traffic correctly.
Option C: Incorrect. Configuring VLAN 12 in both edge port and role settings is redundant and unnecessary.
Option D: Incorrect. Native VLANs do not handle tagged traffic like VLAN 12 for VoIP phones.
Question #13
You have configured an AOS-CX switch to implement 802.1X on edge ports. Assume ports operate in the default auth-mode. VoIP phones are assigned to the "voice" role and need to send traffic that is tagged for VLAN 12.
Where should you configure VLAN 12?
- A . As the trunk native VLAN on edge ports and the trunk native VLAN on the "voice" role.
- B . As the allowed trunk VLAN in the "voice" role (and not in the edge port settings).
- C . As a trunk allowed VLAN on edge ports and the trunk native VLAN in the "voice" role.
- D . As the trunk native VLAN in the "voice" role (and not in the edge port settings).
Correct Answer: B
B
Explanation:
Voice Role VLAN Configuration:
When VoIP phones are authenticated and assigned to the "voice" role, VLAN 12 should be explicitly defined as an allowed trunk VLAN within the role configuration.
The VLAN configuration should be role-specific rather than on the edge port, as this ensures dynamic
VLAN assignment based on authentication results.
Option Analysis:
Option A: Incorrect. Native VLANs are for untagged traffic, but VoIP traffic is tagged.
Option B: Correct. VLAN 12 must be configured as the allowed trunk VLAN in the "voice" role to tag VoIP traffic correctly.
Option C: Incorrect. Configuring VLAN 12 in both edge port and role settings is redundant and unnecessary.
Option D: Incorrect. Native VLANs do not handle tagged traffic like VLAN 12 for VoIP phones.
B
Explanation:
Voice Role VLAN Configuration:
When VoIP phones are authenticated and assigned to the "voice" role, VLAN 12 should be explicitly defined as an allowed trunk VLAN within the role configuration.
The VLAN configuration should be role-specific rather than on the edge port, as this ensures dynamic
VLAN assignment based on authentication results.
Option Analysis:
Option A: Incorrect. Native VLANs are for untagged traffic, but VoIP traffic is tagged.
Option B: Correct. VLAN 12 must be configured as the allowed trunk VLAN in the "voice" role to tag VoIP traffic correctly.
Option C: Incorrect. Configuring VLAN 12 in both edge port and role settings is redundant and unnecessary.
Option D: Incorrect. Native VLANs do not handle tagged traffic like VLAN 12 for VoIP phones.
Question #13
You have configured an AOS-CX switch to implement 802.1X on edge ports. Assume ports operate in the default auth-mode. VoIP phones are assigned to the "voice" role and need to send traffic that is tagged for VLAN 12.
Where should you configure VLAN 12?
- A . As the trunk native VLAN on edge ports and the trunk native VLAN on the "voice" role.
- B . As the allowed trunk VLAN in the "voice" role (and not in the edge port settings).
- C . As a trunk allowed VLAN on edge ports and the trunk native VLAN in the "voice" role.
- D . As the trunk native VLAN in the "voice" role (and not in the edge port settings).
Correct Answer: B
B
Explanation:
Voice Role VLAN Configuration:
When VoIP phones are authenticated and assigned to the "voice" role, VLAN 12 should be explicitly defined as an allowed trunk VLAN within the role configuration.
The VLAN configuration should be role-specific rather than on the edge port, as this ensures dynamic
VLAN assignment based on authentication results.
Option Analysis:
Option A: Incorrect. Native VLANs are for untagged traffic, but VoIP traffic is tagged.
Option B: Correct. VLAN 12 must be configured as the allowed trunk VLAN in the "voice" role to tag VoIP traffic correctly.
Option C: Incorrect. Configuring VLAN 12 in both edge port and role settings is redundant and unnecessary.
Option D: Incorrect. Native VLANs do not handle tagged traffic like VLAN 12 for VoIP phones.
B
Explanation:
Voice Role VLAN Configuration:
When VoIP phones are authenticated and assigned to the "voice" role, VLAN 12 should be explicitly defined as an allowed trunk VLAN within the role configuration.
The VLAN configuration should be role-specific rather than on the edge port, as this ensures dynamic
VLAN assignment based on authentication results.
Option Analysis:
Option A: Incorrect. Native VLANs are for untagged traffic, but VoIP traffic is tagged.
Option B: Correct. VLAN 12 must be configured as the allowed trunk VLAN in the "voice" role to tag VoIP traffic correctly.
Option C: Incorrect. Configuring VLAN 12 in both edge port and role settings is redundant and unnecessary.
Option D: Incorrect. Native VLANs do not handle tagged traffic like VLAN 12 for VoIP phones.
Question #16
What is a benefit of Online Certificate Status Protocol (OCSP)?
- A . It lets a device query whether a single certificate is revoked or not.
- B . It lets a device dynamically renew its certificate before the certificate expires.
- C . It lets a device download all the serial numbers for certificates revoked by a CA at once.
- D . It lets a device determine whether to trust a certificate without needing any root certificates installed.
Correct Answer: A
A
Explanation:
The benefit of the Online Certificate Status Protocol (OCSP) is that it allows a device to query whether a single certificate is revoked or not. OCSP provides a real-time mechanism for checking the revocation status of an individual certificate, enabling devices to verify the validity of certificates
quickly and efficiently.
A
Explanation:
The benefit of the Online Certificate Status Protocol (OCSP) is that it allows a device to query whether a single certificate is revoked or not. OCSP provides a real-time mechanism for checking the revocation status of an individual certificate, enabling devices to verify the validity of certificates
quickly and efficiently.
Question #17
What is a use case for the HPE Aruba Networking ClearPass OnGuard dissolvable agent?
- A . Continuously monitoring Windows domain clients for compliance
- B . Implementing a one-time compliance scan
- C . Auto-remediating posture issues on clients
- D . Periodically scanning Linux clients for security issues
Correct Answer: B
B
Explanation:
The use case for the HPE Aruba Networking ClearPass OnGuard dissolvable agent is implementing a one-time compliance scan. The dissolvable agent is designed to perform a compliance check without requiring a permanent installation on the client device. This is ideal for environments where a quick, temporary assessment of the device’s security posture is needed without the overhead of a persistent agent.
B
Explanation:
The use case for the HPE Aruba Networking ClearPass OnGuard dissolvable agent is implementing a one-time compliance scan. The dissolvable agent is designed to perform a compliance check without requiring a permanent installation on the client device. This is ideal for environments where a quick, temporary assessment of the device’s security posture is needed without the overhead of a persistent agent.
Question #17
What is a use case for the HPE Aruba Networking ClearPass OnGuard dissolvable agent?
- A . Continuously monitoring Windows domain clients for compliance
- B . Implementing a one-time compliance scan
- C . Auto-remediating posture issues on clients
- D . Periodically scanning Linux clients for security issues
Correct Answer: B
B
Explanation:
The use case for the HPE Aruba Networking ClearPass OnGuard dissolvable agent is implementing a one-time compliance scan. The dissolvable agent is designed to perform a compliance check without requiring a permanent installation on the client device. This is ideal for environments where a quick, temporary assessment of the device’s security posture is needed without the overhead of a persistent agent.
B
Explanation:
The use case for the HPE Aruba Networking ClearPass OnGuard dissolvable agent is implementing a one-time compliance scan. The dissolvable agent is designed to perform a compliance check without requiring a permanent installation on the client device. This is ideal for environments where a quick, temporary assessment of the device’s security posture is needed without the overhead of a persistent agent.
Question #17
What is a use case for the HPE Aruba Networking ClearPass OnGuard dissolvable agent?
- A . Continuously monitoring Windows domain clients for compliance
- B . Implementing a one-time compliance scan
- C . Auto-remediating posture issues on clients
- D . Periodically scanning Linux clients for security issues
Correct Answer: B
B
Explanation:
The use case for the HPE Aruba Networking ClearPass OnGuard dissolvable agent is implementing a one-time compliance scan. The dissolvable agent is designed to perform a compliance check without requiring a permanent installation on the client device. This is ideal for environments where a quick, temporary assessment of the device’s security posture is needed without the overhead of a persistent agent.
B
Explanation:
The use case for the HPE Aruba Networking ClearPass OnGuard dissolvable agent is implementing a one-time compliance scan. The dissolvable agent is designed to perform a compliance check without requiring a permanent installation on the client device. This is ideal for environments where a quick, temporary assessment of the device’s security posture is needed without the overhead of a persistent agent.
Question #20
A company wants to use HPE Aruba Networking ClearPass Policy Manager (CPPM) to profile Linux devices. You have decided to schedule a subnet scan of the devices’ subnets.
Which additional step should you complete before scheduling the scan?
- A . Set up SSH accounts on CPPM and map them to the Linux devices’ subnets.
- B . Enable WMI probing in the cluster-wide parameters.
- C . Enable the Data Port in the ClearPass server settings and connect that port to the network.
- D . Configure SNMP in the network device settings for the switches that support the Linux devices.
Correct Answer: C
C
Explanation:
Subnet Scan Requirements for Profiling:
For ClearPass to scan and profile devices in a subnet, the Data Port must be enabled on the ClearPass server and connected to the network.
This ensures that ClearPass can send and receive the required packets for device discovery and profiling.
Option Analysis:
Option A: Incorrect. SSH accounts are not required for subnet scanning.
Option B: Incorrect. WMI probing is for Windows systems, not Linux devices.
Option C: Correct. The Data Port is essential for subnet scans and must be properly configured and connected.
Option D: Incorrect. SNMP is used for network device monitoring, not Linux device profiling.
C
Explanation:
Subnet Scan Requirements for Profiling:
For ClearPass to scan and profile devices in a subnet, the Data Port must be enabled on the ClearPass server and connected to the network.
This ensures that ClearPass can send and receive the required packets for device discovery and profiling.
Option Analysis:
Option A: Incorrect. SSH accounts are not required for subnet scanning.
Option B: Incorrect. WMI probing is for Windows systems, not Linux devices.
Option C: Correct. The Data Port is essential for subnet scans and must be properly configured and connected.
Option D: Incorrect. SNMP is used for network device monitoring, not Linux device profiling.