HP HPE7-A01 Practice Exams
Last updated on Oct 22,2026- Exam Code: HPE7-A01
- Exam Name: Aruba Certified Campus Access Professional Exam
- Certification Provider: HP
- Latest update: Oct 22,2026
You need to ensure that voice traffic sent through an ArubaOS-CX switch arrives with minimal latency What is the best scheduling technology to use for this task ? (Select two.)
- A . Voice VLANs can be automatically configured for VoIP phones
- B . APs can request power as needed from PoE-enabled switch ports
- C . iSCSl client devices can request to have flow control enabled
- D . GVRP VLAN information can be used to dynamically add VLANs to a trunk
- E . iSCSl client devices can set the required MTU setting for the port.
What is a primary benefit of BSS coloring?
- A . BSS color tags improve performance by allowing clients on the same channel to share airtime.
- B . BSS color tags are applied to client devices and can reduce the threshold for interference
- C . BSS color tags are applied to Wi-Fi channels and can reduce the threshold for interference
- D . BSS color tags improve security by identifying rogue APs and removing them from the network.
Which Aruba AP mode is sending captured RF data to Aruba Central for waterfall plot?
- A . Hybrid Mode
- B . Air Monitor
- C . Spectrum Monitor
- D . Dual Mode
A company deployed Dynamic Segmentation with their CX switches and Gateways After performing a security audit on their network, they discovered that the tunnels built between the CX switch and the Aruba Gateway are not encrypted. The company is concerned that bad actors could try to insert spoofed messages on the Gateway to disrupt communications or obtain information about the network.
Which action must the administrator perform to address this situation?
- A . Enable Secure Mode Enhanced
- B . Enable Enhanced security
- C . Enable Enhanced PAPI security
- D . Enable GRE security
A company deployed Dynamic Segmentation with their CX switches and Gateways After performing a security audit on their network, they discovered that the tunnels built between the CX switch and the Aruba Gateway are not encrypted. The company is concerned that bad actors could try to insert spoofed messages on the Gateway to disrupt communications or obtain information about the network.
Which action must the administrator perform to address this situation?
- A . Enable Secure Mode Enhanced
- B . Enable Enhanced security
- C . Enable Enhanced PAPI security
- D . Enable GRE security
How is Dynamic Multicast Optimization (DMO) implemented in an HPE Aruba wireless network?
DMO is configured individually tor each SSID in use in the network.
The AP uses OOS to provide equal air time for multicast traffic,
DMO is configured globally for each SSID in use in the network.
The controller converts multicast streams into unicast streams.
- A . DMO is configured individually for each SSID in use in the network.
DMO is a feature that allows the AP to convert multicast streams into unicast streams over the wireless link. This enhances the quality and reliability of streaming video, while preserving the bandwidth available to the non-video clients. DMO is configured individually for each SSID in use in the network, as different SSIDs may have different multicast requirements. According to the Aruba document Configuring WLAN Settings for an SSID Profile, one of the steps to configure DMO is:
Dynamic multicast optimization: Select Enabled to allow IAP to convert multicast streams into unicast streams over the wireless link. Enabling Dynamic Multicast Optimization (DMO) enhances the quality and reliability of streaming video, while preserving the bandwidth available to the non-video clients.
The other options are incorrect because: - B . The AP does not use QoS to provide equal air time for multicast traffic. QoS is a feature that prioritizes different types of traffic based on their importance and latency sensitivity. QoS does not affect how multicast streams are transmitted over the wireless link.
- C . DMO is not configured globally for each SSID in use in the network. DMO is configured individually for each SSID, as different SSIDs may have different multicast requirements.
- D . The controller does not convert multicast streams into unicast streams. The AP does the conversion, as it is closer to the wireless clients and can optimize the transmission based on the client capabilities and channel conditions.
How is Dynamic Multicast Optimization (DMO) implemented in an HPE Aruba wireless network?
DMO is configured individually tor each SSID in use in the network.
The AP uses OOS to provide equal air time for multicast traffic,
DMO is configured globally for each SSID in use in the network.
The controller converts multicast streams into unicast streams.
- A . DMO is configured individually for each SSID in use in the network.
DMO is a feature that allows the AP to convert multicast streams into unicast streams over the wireless link. This enhances the quality and reliability of streaming video, while preserving the bandwidth available to the non-video clients. DMO is configured individually for each SSID in use in the network, as different SSIDs may have different multicast requirements. According to the Aruba document Configuring WLAN Settings for an SSID Profile, one of the steps to configure DMO is:
Dynamic multicast optimization: Select Enabled to allow IAP to convert multicast streams into unicast streams over the wireless link. Enabling Dynamic Multicast Optimization (DMO) enhances the quality and reliability of streaming video, while preserving the bandwidth available to the non-video clients.
The other options are incorrect because: - B . The AP does not use QoS to provide equal air time for multicast traffic. QoS is a feature that prioritizes different types of traffic based on their importance and latency sensitivity. QoS does not affect how multicast streams are transmitted over the wireless link.
- C . DMO is not configured globally for each SSID in use in the network. DMO is configured individually for each SSID, as different SSIDs may have different multicast requirements.
- D . The controller does not convert multicast streams into unicast streams. The AP does the conversion, as it is closer to the wireless clients and can optimize the transmission based on the client capabilities and channel conditions.
A network administrator is troubleshooting some issues guest users are having when connecting and authenticating to the network The access switches are AOS-CX switches.
What command should the administrator use to examine information on which role the guest user has been assigned?
- A . show aaa authentication port-access interface all client-status
- B . show port-access captiveportal profile
- C . show port-access role
- D . diag-dump captiveportal client verbose
A network administrator is troubleshooting some issues guest users are having when connecting and authenticating to the network The access switches are AOS-CX switches.
What command should the administrator use to examine information on which role the guest user has been assigned?
- A . show aaa authentication port-access interface all client-status
- B . show port-access captiveportal profile
- C . show port-access role
- D . diag-dump captiveportal client verbose
The customer needs a network hardware refresh to replace an aging Aruba 5406R core switch pair using spanning tree configuration with Aruba CX 8360-32YC switches.
What is the benefit of VSX clustering with the new solution?
- A . stacked data-plane
- B . faster MSTP converge processing
- C . dual Aruba AP LAN port connectivity for PoE redundancy
- D . dual control plane provides better resiliency