HP HPE0-J68 Practice Exams
Last updated on Oct 23,2026- Exam Code: HPE0-J68
- Exam Name: HPE Storage Solutions
- Certification Provider: HP
- Latest update: Oct 23,2026
Question #121
Which product supports dual authorization and a compliance mode that can prevent internal attacks on the local UIs of their devices?
- A . HPE Alletra 9000
- B . HPE StoreOnce
- C . HPE Primera
- D . HPE Alletra 6000
Correct Answer: B
Question #122
What is the maximum number of SSDs supported by a 2-node HPE Alletra 9000 system running Alletra OS 9.5?
- A . 120
- B . 444
- C . 240
- D . 256
Correct Answer: C
Question #123
What data access protocol does the HPE Alletra dHCI solution use between storage and compute layers?
- A . NVMe-oF
- B . iSCSI
- C . NFC
- D . FC
Correct Answer: B
B
Explanation:
The HPE Alletra dHCI solution uses the iSCSI protocol for data access between the storage and compute layers. iSCSI is a network protocol that enables the transport of SCSI commands over IP networks, allowing for efficient and scalable storage networking. This protocol is commonly used in hyper-converged and disaggregated hyper-converged infrastructure (dHCI) environments, providing flexibility and ease of integration.
Reference: HPE Alletra dHCI Overview
HPE iSCSI Solutions
B
Explanation:
The HPE Alletra dHCI solution uses the iSCSI protocol for data access between the storage and compute layers. iSCSI is a network protocol that enables the transport of SCSI commands over IP networks, allowing for efficient and scalable storage networking. This protocol is commonly used in hyper-converged and disaggregated hyper-converged infrastructure (dHCI) environments, providing flexibility and ease of integration.
Reference: HPE Alletra dHCI Overview
HPE iSCSI Solutions
Question #124
Which statement is correct when comparing functionalities of the AF, CF, and SF series in the nimble storage portfolio?
- A . Zero copy clone are unique feature of all flash array within the nimble portfolio
- B . SF series supports storage snapshots and replication using veeeam backup & replication CS and AF series support storage snapshot only.
- C . Inline deduplication for complete array capacity in combination with compression is offered by the AF and SF series only (67) need to check
- D . 99.9999% availability measured and guaranteed for AF and CF series arrays, SF series array offer 99.999% availability.
Correct Answer: C
C
Explanation:
Inline deduplication and compression are advanced features offered in the HPE Nimble AF (All-Flash) and SF (Secondary Flash) series. These features reduce the amount of physical storage required by eliminating duplicate data and compressing stored data, making it more space-efficient. This capability is available across the entire capacity of the AF and SF series arrays, allowing for substantial savings in storage space and cost. The AF series is designed for primary workloads requiring high performance, while the SF series is optimized for secondary workloads, such as backups and archival, with similar data reduction benefits.
C
Explanation:
Inline deduplication and compression are advanced features offered in the HPE Nimble AF (All-Flash) and SF (Secondary Flash) series. These features reduce the amount of physical storage required by eliminating duplicate data and compressing stored data, making it more space-efficient. This capability is available across the entire capacity of the AF and SF series arrays, allowing for substantial savings in storage space and cost. The AF series is designed for primary workloads requiring high performance, while the SF series is optimized for secondary workloads, such as backups and archival, with similar data reduction benefits.
Question #125
Which resource provides configurations for HPE tested and referenced configurations in a software-defined storage environment?
- A . HPE Storage Sizer
- B . One Config Advanced
- C . NinjaStars
- D . StoreVirtual VSA Ready Nodes
Correct Answer: D
D
Explanation:
StoreVirtual VSA Ready Nodes provide configurations for HPE-tested and referenced configurations in a software-defined storage environment. These configurations are pre-validated and optimized for specific workloads, ensuring that they meet performance and reliability requirements. StoreVirtual VSA (Virtual Storage Appliance) enables the deployment of HPE’s software-defined storage solutions on industry-standard servers, making it a flexible and cost-effective option for various storage needs.
Reference: HPE StoreVirtual VSA
HPE Ready Nodes
D
Explanation:
StoreVirtual VSA Ready Nodes provide configurations for HPE-tested and referenced configurations in a software-defined storage environment. These configurations are pre-validated and optimized for specific workloads, ensuring that they meet performance and reliability requirements. StoreVirtual VSA (Virtual Storage Appliance) enables the deployment of HPE’s software-defined storage solutions on industry-standard servers, making it a flexible and cost-effective option for various storage needs.
Reference: HPE StoreVirtual VSA
HPE Ready Nodes
Question #126
What HPE Alletra 9000 CLI command allows you to display teal-time statistics on exported volumes including roundtrip time of an 10 as seen by the system?
- A . srstatvv
- B . statvlun
- C . srstatvlun
- D . statvv
Correct Answer: B
B
Explanation:
The statvlun command in the HPE Alletra 9000 CLI is used to display real-time statistics on exported volumes, including the roundtrip time (RTT) of an I/O as seen by the system. This command provides detailed insights into the performance of the volumes, helping administrators monitor and optimize the storage system’s performance in real-time.
Reference: HPE Alletra 9000 CLI Commands
HPE Storage Performance Monitoring
B
Explanation:
The statvlun command in the HPE Alletra 9000 CLI is used to display real-time statistics on exported volumes, including the roundtrip time (RTT) of an I/O as seen by the system. This command provides detailed insights into the performance of the volumes, helping administrators monitor and optimize the storage system’s performance in real-time.
Reference: HPE Alletra 9000 CLI Commands
HPE Storage Performance Monitoring
Question #127
Your customer has very low deduplication ratio of their Linux VMs farm which is hosted on a HPE Alletra 9000.
Which filesystem type could cause this?
- A . XFS
- B . EXT4
- C . Btrfs
- D . EXT3
Correct Answer: A
A
Explanation:
A very low deduplication ratio in a Linux VM farm hosted on an HPE Alletra 9000 could be caused by the use of the XFS filesystem. XFS is known for its performance and scalability but is less effective in environments where deduplication is critical because of its data layout and file handling characteristics. This can lead to reduced deduplication efficiency compared to other filesystems like EXT4 or Btrfs.
For more information, refer to:
HPE Alletra 9000 Documentation
A
Explanation:
A very low deduplication ratio in a Linux VM farm hosted on an HPE Alletra 9000 could be caused by the use of the XFS filesystem. XFS is known for its performance and scalability but is less effective in environments where deduplication is critical because of its data layout and file handling characteristics. This can lead to reduced deduplication efficiency compared to other filesystems like EXT4 or Btrfs.
For more information, refer to:
HPE Alletra 9000 Documentation
Question #128
Your customer would like a new primary array and requires protection of a volume on a different storage system in another location.
Which technology should the array include?
- A . Deduplication
- B . Replication
- C . Tiering
- D . Snapshots
Correct Answer: B
Question #129
Which feature enables a non-disruptive environment where host-based multi-pathing software is not affected in the event of a firmware upgrade?
- A . HPE 3PAR Access Guard
- B . HPE 3PAR Persistent Ports
- C . HPE 3PAR Persistent Cache
- D . HPE 3PAR MPIO
Correct Answer: B
B
Explanation:
HPE 3PAR Persistent Ports is a feature that enables a non-disruptive environment by allowing host-based multi-pathing software to remain unaffected during events such as firmware upgrades. With Persistent Ports, the active I/O paths are automatically moved to alternate ports if the primary ports are undergoing maintenance or upgrades, ensuring continuous data access and eliminating disruptions.
Reference: HPE 3PAR Persistent Ports
HPE 3PAR StoreServ Features
B
Explanation:
HPE 3PAR Persistent Ports is a feature that enables a non-disruptive environment by allowing host-based multi-pathing software to remain unaffected during events such as firmware upgrades. With Persistent Ports, the active I/O paths are automatically moved to alternate ports if the primary ports are undergoing maintenance or upgrades, ensuring continuous data access and eliminating disruptions.
Reference: HPE 3PAR Persistent Ports
HPE 3PAR StoreServ Features
Question #130
Refer to the exhibit:
Which type of data format do you expect in the red rectangle?
- A . 172.16.31.11/24
- B . 94:b4:0f:cd:34:8a
- C . iqn.2015-02.com.hpe:oneview-vcgeDav000
- D . 20110002AC00736E235.524
Correct Answer: C
C
Explanation:
The red rectangle in the exhibit is likely asking for an iSCSI Qualified Name (IQN), which is a unique identifier used in iSCSI environments to address devices on a storage network. The format "iqn.2015-02.com.hpe
" follows the standard IQN naming convention, which is used to identify the iSCSI initiators and targets in an HPE storage environment.
HPE Storage
Reference: HPE Storage Networking HPE iSCSI and SAN Solutions
C
Explanation:
The red rectangle in the exhibit is likely asking for an iSCSI Qualified Name (IQN), which is a unique identifier used in iSCSI environments to address devices on a storage network. The format "iqn.2015-02.com.hpe
" follows the standard IQN naming convention, which is used to identify the iSCSI initiators and targets in an HPE storage environment.
HPE Storage
Reference: HPE Storage Networking HPE iSCSI and SAN Solutions