DELL EMC D-PSC-MN-01 Practice Exams
Last updated on Nov 16,2026- Exam Code: D-PSC-MN-01
- Exam Name: Dell PowerScale Maintenance
- Certification Provider: DELL EMC
- Latest update: Nov 16,2026
What are the required settings when using terminal emulation software to connect to a Dell EMC PowerScale Gen 5 node?
- A . Transfer Rate = 57.600, Data Bits = 8, Parity = 1, Stop Bits = 0, Flow Control = Software
- B . Transfer Rate = 115.200, Data Bits = 8, Parity = None, Stop Bits = 1, Flow Control = Hardware
- C . Transfer Rate = 57.600, Data Bits = 7, Parity = 1, Stop Bits = 8, Flow Control = Hardware
- D . Transfer Rate = 115.200, Data Bits = 7, Parity = 1, Stop Bits = 1, Flow Control = Software
Which external network ports are available on Dell EMC PowerScale Gen 6.5 nodes?
- A . 10GigE, 25GigE, or 40GigE
- B . 10GigE, 25GigE, or 100GigE
- C . 1GigE, 25GigE, or 100GigE
- D . 1GigE, 10GigE, or 25GigE
What is the isi diagnostics gather command used for?
- A . Diagnose the CPU.
- B . Diagnose the TPM
- C . Gather performance data.
- D . Gather cluster logs
What is an important consideration when connecting Dell PowerScale Gen6 nodes to external power?
- A . Cable each node in a node pair to a different PDU.
- B . Cable all nodes to the external power feeds before connecting switch power cables.
- C . The total power load for all nodes in the rack should not exceed 100% of the branch circuit rating.
- D . Connect both cables of each node to different external power feeds.
What type of upgrade on a Dell PowerScale cluster requires the least amount of time?
- A . Simultaneous
- B . Parallel
- C . Rolling
- D . Automatic
What type of upgrade on a Dell PowerScale cluster requires the least amount of time?
- A . Simultaneous
- B . Parallel
- C . Rolling
- D . Automatic
What is the maximum recommended ambient temperature for the operation of a Dell EMC PowerScale Gen 6 node?
- A . 27 degrees C (80 degrees F)
- B . 32 degrees C (89 degrees F)
- C . 35 degrees C (95 degrees F)
- D . 40 degrees C (104 degrees F)
What accurately describes the InfiniBand cable support?
- A . Supports QSFP to QSFP cabling only
- B . Supports QSFP to QSFP cabling or QSFP to CX4 cabling
- C . Supports QSFP to CX4 cabling only
- D . Supports front-end customer external traffic
An SSD has failed in Node 1 in a Dell EMC PowerScale F200 cluster.
After replacing the drive, which command should be run to ensure the node has finished updating?
- A . Isi devices -d
- B . Isi status -h
- C . Isi devices device list Cnode-Inn 1
- D . Isi status -q
A platform engineer needs to study the solution diagrams and topologies.
What should the engineer consult?
- A . PEQ
- B . Site Preparation and Planning Guide
- C . Dell EMC support
- D . SolVe Online