DELL EMC D-PE-OE-23 Practice Exams
Last updated on Oct 24,2026- Exam Code: D-PE-OE-23
- Exam Name: Dell Technologies PowerEdge Operate 2023
- Certification Provider: DELL EMC
- Latest update: Oct 24,2026
A Dell EMC PowerEdge 14G server fails to boot, and the server administrator is investigating the cause of the failure. The following event appears in the Lifecycle Log: “The Boot Guard detected a corrupted BIOS in the server”.
What caused the boot failure?
- A . Motherboard faulty
- B . Server compromised
- C . Boot Guard
- D . Incorrect BIOS
A technician needs to remotely update the iDRAC with Lifecycle Controller firmware.
Which three steps should the technician take to complete the update? (Choose three.)
- A . After firmware update completes, restart server
- B . Connect to the iDRAC GUI
- C . Go to the Firmware Update page and upload the iDRAC firmware.
- D . Go to Summary Page and reset the iDRAC
- E . Boot the server into F10 to start the firmware update
- F . Locate the latest iDRAC firmware and download to management station
Where is the Asset Tag located on the Dell EMC PowerEdge server?
- A . Server chassis
- B . BIOS settings
- C . Dell manufacturing label
- D . Pull-out information tab
A drive has failed in one of the two disk groups in a Dell PowerEdge server. The assigned hot spare did not replace the failed drive.
How should the RAID SET have been assigned to avoid this issue?
- A . Persistent hot spare
- B . Global hot spare
- C . Revertible hot spare
- D . Dedicated hot spare
A server arrives without any RAID configuration. All firmware is up to date. The server has a PERC H730p controller. The technician needs to configure the required RAID arrays prior to OS installation.
Which three methods can be used to configure the RAID arrays? (Choose three.)
- A . Boot into the Ctrl+C
- B . Access the Physical Disk section of the iDRAC GUI
- C . Access the Virtual Disk section of the iDRAC GUI
- D . Boot into the Ctrl+R
- E . Boot into the F2 BIOS
Which characteristic of system management enables a company to reduce costs?
- A . Integration with third-party tools
- B . Multi-tenancy support
- C . Rich management interface
- D . Automation of routine tasks
A Dell EMC PowerEdge 14G server uses Intel OPTANE DC Persistent Memory in Memory mode.
What is the minimum size DIMM supported for this type of memory?
- A . 64 GB
- B . 128 GB
- C . 256 GB
- D . 512 GB
Which is responsible for controlling the NVMe disks, when using a Paddle Card in a PowerEdge 15G server?
- A . S150
- B . HBA355
- C . H745
What is the maximum number of local iDRAC users that can be created?
- A . 32
- B . 4
- C . 16
- D . 8
A technician needs to repurpose a server.
What should they do to prepare the server for its new role?
- A . Boot into F10, select System Erase, and press ‘Y° to confirm erase
- B . Enable Delete All Settings in the iDRAC Troubleshooting section
- C . Boot into F10, navigate to Retire or Repurpose Server, and Select Components to be cleared
- D . Boot to Ctrl+S and perform Network Erase