DELL EMC D-PE-FN-01 Practice Exams
Last updated on Oct 23,2026- Exam Code: D-PE-FN-01
- Exam Name: Dell PowerEdge Foundations v2 Exam
- Certification Provider: DELL EMC
- Latest update: Oct 23,2026
Which RAID configuration provides the lowest redundancy level?
- A . RAID 5
- B . RAID 6
- C . RAID 50
- D . RAID 60
An administrator experiences a failure in one of the two redundant power supplies in a Dell EMC PowerEdge server. The administrator has a shelf spare, but it has a different wattage rating from those in the server.
What will happen if the administrator installs the spare power supply in the existing configuration?
- A . Power Supply Mismatch alert is issued; the original power supply is used and the newly installed power supply is not used
- B . Power Supply Mismatch alert is issued; both power supplies are disabled, resulting in the system being powered down
- C . Differences in supply wattages is recognized; power is conditioned so that the supply drawing the lower wattage is used
- D . Power Supply Mismatch alert is issued; the original power supply is disabled and the newly installed supply is used
A system administrator is securing the company’s out-of-band management solution on Dell EMC PowerEdge servers. They want to use a security feature that can protect their configuration from any unintentional or accidental changes after the system is provisioned.
Which feature will achieve the security requirements?
- A . System Lookdown Mode
- B . RSA SecureID Authentication
- C . Trusted Platform Module
- D . Boot Guard
An administrator received CPU thermal warning alerts from a Dell EMC PowerEdge server. The inlet temperature is normal.
What should they do?
- A . Verify that memory shrouds are installed in the server
- B . Lower the room air conditioning temperature
- C . Increase the voltage of the fans via the iDRAC GUI
- D . Check the Hot Aisle Containment
What types of data transfer are used by Dell EMC servers to connect mass storage devices?
- A . USB, Ethernet, SSD, and CSI
- B . SAS, USB, Ethernet, and SSID
- C . SSID, CSI, USB, and SAS
- D . Ethernet, SSID, CSI, and SAS
A system administrator is securing the company’s servers. They want to use a security technology that authenticates the host system hardware.
Which technology is used for this security requirement?
- A . Trusted Platform Module
- B . RSA SecureID Authentication
- C . Boot Guard
- D . System Lookdown Mode
A system administrator needs to change from UEFI to BIOS on their Dell EMC PowerEdge server. In which menu of the System BIOS can this be changed?
- A . Miscellaneous Settings
- B . Boot Settings
- C . Processor Settings
- D . System Profile Settings
A system administrator needs to connect through a private network with more than 400 systems on the same broadcast domain.
Which network class should be used to achieve this task?
- A . Class B
- B . Class C
- C . Class D
- D . Class E
Which Ethernet cable type should be installed if high interference is a concern?
- A . RJ45
- B . 802.11n
- C . STP
- D . UTP
What are characteristics of a UTP Ethernet cable?
- A . High noise and higher costs
- B . Less susceptible to noise and lower costs
- C . High noise and lower costs
- D . Less susceptible to noise and higher costs