DELL EMC D-NWG-DS-00 Practice Exams
Last updated on Oct 22,2026- Exam Code: D-NWG-DS-00
- Exam Name: Dell Networking Design
- Certification Provider: DELL EMC
- Latest update: Oct 22,2026
In the context of network replacement planning, which step is critical to ensure minimal downtime?
- A . Installing additional access points
- B . Performing a detailed network assessment prior to replacement
- C . Increasing the number of network devices
- D . Replacing all switches simultaneously
A customer environment consists of the following hardware:
– 1x MX7000 with 2x MX9116n FSE
– 4x M760c blades each with a dual port network interface controller
– 2x 32 G FC switches
– 1x FC Storage Array
What are three requirements for FCoE in this environment?
- A . NPIV must be enabled on the Upstream Switch.
- B . Link Layer Flow Control receive must be enabled.
- C . A one-to-one connection must exist between the MX9116n and the upstream FC switch.
- D . FCoE partition must be created in NPAR on the blade servers.
- E . Zoning must be configured on the MX9116n switch.
What are three design best practices when discussing the potential for a network replacement?
- A . Remove and decommission the hardware.
- B . Recommend the one-size-fits-all solutions in the Dell Portfolio.
- C . Document the replacement steps.
- D . Provide support for onsite replacement.
- E . Review existing network configurations for Dell, Cisco, and HP switches.
The optical cables in a local area network are providing insufficient power. An engineer observes that the color of the cables is aqua.
What cable did the engineer identify?
- A . Multimode 50 mm and 62.5 mm (OM1, OM2)
- B . Multimode 50 mm, laser optimized (OM4+)
- C . Single mode (OS1/OS2)
- D . Multimode 50 mm, laser optimized (OM3, OM4)
The optical cables in a local area network are providing insufficient power. An engineer observes that the color of the cables is aqua.
What cable did the engineer identify?
- A . Multimode 50 mm and 62.5 mm (OM1, OM2)
- B . Multimode 50 mm, laser optimized (OM4+)
- C . Single mode (OS1/OS2)
- D . Multimode 50 mm, laser optimized (OM3, OM4)
Which of the following should be considered during the planning phase of a Cyber Recovery Vault?
- A . Physical distance between production and recovery sites
- B . The use of thin provisioning
- C . Network switch redundancy
- D . VLAN segmentation
What is the main function of the Financial Force tool during the scoping phase of a networking design project?
- A . It manages network performance monitoring
- B . It helps in calculating the financial budget and costs associated with the project
- C . It generates scripts for network deployment
- D . It tracks network traffic analytics
Which of the following are common components of a network design template?
- A . IP addressing scheme
- B . Network topology diagram
- C . VLAN configurations
- D . Software patching schedule
What is a critical consideration during storage network planning?
- A . Assigning VLAN IDs
- B . Calculating environmental and power requirements
- C . Ensuring proper Fibre Channel zoning and redundancy
- D . Installing wireless access points
Why is it important to involve deployment support during the installation of networking equipment?
- A . To ensure that devices are properly configured and operational
- B . To handle network traffic monitoring
- C . To create VLAN assignment tables
- D . To implement routing protocols