CWNP CWDP-305 Practice Exams
Last updated on Oct 22,2026- Exam Code: CWDP-305
- Exam Name: Certified Wireless Design Professional
- Certification Provider: CWNP
- Latest update: Oct 22,2026
A customer wants to deploy a WLAN that employs centralized forwarding.
What LAN requirements should you look for?
- A . High-speed Ethernet links
- B . Layer 3 at the access layer
- C . Layer 2 at the distribution layer
- D . Routing redundancy protocol
What limitation exists when WMM is not enabled on an 802.11n WLAN?
- A . 802.11 QoS will not be available
- B . The maximum channel-width will be 20MHz
- C . EDCA values will change
- D . Only two ACs will be available
A table of VLANs in a _________ document should include what device performs ________ services. (Fill in the blanks)
- A . HLD, routing
- B . LLD, bridging
- C . LLD, routing
- D . HLD, QoS
ABC Manufacturing has a heavily-used dual-band (2.4 / 5 GHz) WLAN, but sporadic RF interference across the 2.4 GHz band is causing dropped VoWiFi calls and leading to data connectivity and throughput problems.
In addition to avoiding 2.4 GHz channels and installing a distributed spectrum analyzer to locate RF interference sources, what should the implementer do to resolve the problem fully?
- A . Have only guest access on the 5 GHz channels.
- B . Move all corporate data clients and VoWiFi devices to the 5 GHz channels appropriate for their regulatory domain.
- C . Use captive portals for guest authentication in 5 GHz.
- D . Implement WPA-PSK everywhere in the network.
Your customer is using PSK as their only authentication. They have an industry requirement to move to a stronger solution. Your recommendation is to move to a certificate-based type of authentication where both the client and server require certificates.
Which EAP type would be the best fit?
- A . EAP-FAST
- B . EAP-TTLS
- C . EAP-TLS
- D . PEAP
Your customer’s 802.11n laptops are not able to see the SSID in the 5 GHz band in the conference room. When doing a walkthrough using one of these laptops, you confirm that it is unable to see the SSID in the 5 GHz band in the conference room. When using your own 802.11 ac laptop, you’re able to see the SSID.
What is the most likely cause of this problem?
- A . The AP is configured to use channel 36
- B . The customer laptop does not support Transmit Beamforming
- C . The AP is on channel 144
- D . Their laptops are SISO clients
What is the chip rate of 1 Mbps 802.11b?
- A . 11 Mchips/s
- B . 2 Mchips/s
- C . 1 Mchip/s
- D . 22 Mchips/s
You have initiated a site survey to be performed and the team has been onsite and is halfway through gathering the necessary data.
The project sponsor just asked you to make sure the WLAN supports radio frequency identification (RFID) location tracking.
How would you possibly characterize this situation?
- A . Scope creep has occurred.
- B . The 802.3af RTLS standard should be incorporated into the AP configuration.
- C . The 802.11g standard incorporates location tracking.
- D . Any WLAN will support location tracking.
- E . The power requirements on the UPS need to be evaluated.
What advantage provided by 802.11n and 802.11ac is not usable in 1X1:1 low-end client devices?
- A . Mandatory data rates
- B . Channel bonding
- C . MCS data rates
- D . Maximal Ratio Combining
When deploying APs outdoors, what additional component needs to be used that is not needed indoors?
- A . Antennas
- B . NEMA enclosures
- C . Ethernet cables
- D . PoE