CompTIA N10-009 Practice Exams
Last updated on Nov 16,2026- Exam Code: N10-009
- Exam Name: CompTIA Network+ Certification
- Certification Provider: CompTIA
- Latest update: Nov 16,2026
A company wants to implement a disaster recovery site or non-critical applicance, which can tolerance a short period of downltime.
Which of the following type of sites should the company impelement to achieve this goal?
- A . Hot
- B . Cold
- C . Warm
- D . Passive
C
Explanation:
A warm site is a compromise between a hot site and a cold site, providing a balance between cost and recovery time. It is partially equipped with the necessary hardware, software, and infrastructure, allowing for a quicker recovery compared to a cold site but at a lower cost than a hot site.
Recovery Time: Warm sites can be operational within hours to a day, making them suitable for non-critical applications that can tolerate short downtimes.
Cost-Effectiveness: Warm sites are more economical than hot sites as they do not require all systems
to be fully operational at all times.
Network
Reference: CompTIA Network+ N10-007 Official Certification Guide: Discusses disaster recovery strategies and the different types of recovery sites.
Cisco Networking Academy: Provides training on disaster recovery planning and site selection. Network+ Certification All-in-One Exam Guide: Explains the characteristics of hot, warm, and cold sites and their use cases in disaster recovery planning.
Warm sites offer a practical solution for maintaining business continuity for non-critical applications, balancing the need for availability with cost considerations.
While troubleshooting connectivity issues, a junior network administrator is given explicit instructions to test the host’s TCP/IP stack first.
Which of the following commands should the network administrator run?
- A . ping 127.0.0.1
- B . ping 169.254.1.1
- C . ping 172.16.1.1
- D . ping 192.168.1.1
A
Explanation:
The loopback address 127.0.0.1 is used to test the TCP/IP stack of the local machine. Pinging this address confirms whether the local system’s networking stack is functioning correctly.
A network engineer configures a new switch and connects it to an existing switch for expansion and redundancy. Users immediately lose connectivity to the network.
The network engineer notes the following spanning tree information from both switches:
Switch 1
Port State Cost
1 Forward 2
2 Forward 2
Switch 2
Port State Cost
1 Forward 2
2 Forward 2
Which of the following best describes the issue?
- A . The port cost should not be equal.
- B . The ports should use link aggregation.
- C . A root bridge needs to be identified.
- D . The switch should be configured for RSTP.
C
Explanation:
The issue is that no root bridge has been identified. In STP, a root bridge is necessary to manage redundant paths and avoid loops in the network. Without a root bridge, all switches will assume they can forward traffic, causing a network loop and connectivity problems.
A company’s network is experiencing high latency and packet loss during peak hours. Network monitoring tools show increased traffic on a switch.
Which of the following should a network technician implement to reduce the network congestion and improve performance?
- A . Load balancing
- B . Port mirroring
- C . Quality of Service
- D . Spanning Tree Protocol
C
Explanation:
Quality of Service (QoS): This is a feature used in networking to prioritize certain types of traffic. By configuring QoS, network administrators can allocate higher bandwidth to time-sensitive applications like VoIP, video conferencing, or critical business applications during peak usage times. This helps to reduce latency and packet loss, which are often caused by congestion.
Load Balancing (A): While load balancing is useful in distributing traffic across multiple servers or paths, it does not address congestion on a single switch.
Port Mirroring (B): This is used for monitoring network traffic for troubleshooting and diagnostics but does not alleviate congestion.
Spanning Tree Protocol (D): STP prevents switching loops in redundant network topologies, but it is not designed to handle traffic prioritization or congestion issues.
Reference: CompTIA Network+ Official Study Guide, Domain 1.5 (Network Optimization), Domain 2.1 (Network Management).
A company’s network is experiencing high latency and packet loss during peak hours. Network monitoring tools show increased traffic on a switch.
Which of the following should a network technician implement to reduce the network congestion and improve performance?
- A . Load balancing
- B . Port mirroring
- C . Quality of Service
- D . Spanning Tree Protocol
C
Explanation:
Quality of Service (QoS): This is a feature used in networking to prioritize certain types of traffic. By configuring QoS, network administrators can allocate higher bandwidth to time-sensitive applications like VoIP, video conferencing, or critical business applications during peak usage times. This helps to reduce latency and packet loss, which are often caused by congestion.
Load Balancing (A): While load balancing is useful in distributing traffic across multiple servers or paths, it does not address congestion on a single switch.
Port Mirroring (B): This is used for monitoring network traffic for troubleshooting and diagnostics but does not alleviate congestion.
Spanning Tree Protocol (D): STP prevents switching loops in redundant network topologies, but it is not designed to handle traffic prioritization or congestion issues.
Reference: CompTIA Network+ Official Study Guide, Domain 1.5 (Network Optimization), Domain 2.1 (Network Management).
Which of the following attacks can cause users who are attempting to access a company website to be directed to an entirely different website?
- A . DNS poisoning
- B . Denial-of-service
- C . Social engineering
- D . ARP spoofing
A
Explanation:
Network segmentation involves dividing a network into smaller segments or subnets. This is particularly important when integrating OT (Operational Technology) devices to ensure that these devices are isolated from other parts of the network. Segmentation helps protect the OT devices from potential threats and minimizes the impact of any security incidents. It also helps manage traffic and improves overall network performance.
Reference: CompTIA Network+ study materials.
A network engineer configures the network settings in a new server as follows:
IP address = 192.163.1.15
Subnet mask = 255.255.255.0
Gateway = 192.163.1.255
The server can reach other hosts on the same subnet successfully, but it cannot reach hosts on different subnets.
Which of the following is most likely configured incorrectly?
- A . Subnet mask
- B . Gateway
- C . Default route
- D . IP address
B
Explanation:
The default gateway for a network should be an IP address within the subnet, but not the broadcast address. In this case:
IP: 192.163.1.15
Subnet Mask: 255.255.255.0
This means the network range is: 192.163.1.0 – 192.163.1.255
A network engineer configures the network settings in a new server as follows:
IP address = 192.163.1.15
Subnet mask = 255.255.255.0
Gateway = 192.163.1.255
The server can reach other hosts on the same subnet successfully, but it cannot reach hosts on different subnets.
Which of the following is most likely configured incorrectly?
- A . Subnet mask
- B . Gateway
- C . Default route
- D . IP address
B
Explanation:
The default gateway for a network should be an IP address within the subnet, but not the broadcast address. In this case:
IP: 192.163.1.15
Subnet Mask: 255.255.255.0
This means the network range is: 192.163.1.0 – 192.163.1.255
A company receives a cease-and-desist order from its ISP regarding prohibited torrent activity.
Which of the following should be implemented to comply with the cease-and-desist order?
- A . MAC security
- B . Content filtering
- C . Screened subnet
- D . Perimeter network
B
Explanation:
Content filtering can be used to block or restrict access to websites and services that facilitate torrenting and other prohibited activities. By implementing content filtering, the company can comply with the ISP’s cease-and-desist order and prevent users from accessing torrent sites and engaging in prohibited activities.
Reference: CompTIA Network+ study materials.
Which of the following is a cost-effective advantage of a split-tunnel VPN?
- A . Web traffic is filtered through a web filter.
- B . More bandwidth is required on the company’s internet connection.
- C . Monitoring detects insecure machines on the company’s network.
- D . Cloud-based traffic flows outside of the company’s network.
D
Explanation:
A split-tunnel VPN allows certain traffic (e.g., cloud-based services) to bypass the VPN and go directly to the Internet. This reduces the amount of traffic that needs to traverse the company’s VPN and Internet connection, conserving bandwidth and reducing costs. It also means that not all traffic is subject to the same level of inspection or filtering, which can improve performance for cloud-based services.
Reference: CompTIA Network+ study materials.