CompTIA N10-009 Practice Exams
Last updated on Nov 16,2026- Exam Code: N10-009
- Exam Name: CompTIA Network+ Certification
- Certification Provider: CompTIA
- Latest update: Nov 16,2026
Which of the following requires network devices to be managed using a different set of IP addresses?
- A . Console
- B . Split tunnel
- C . Jump box
- D . Out of band
D
Explanation:
Out-of-band (OOB) management refers to using a dedicated management network that is physically separate from the regular data network. This management network uses a different set of IP addresses to ensure that management traffic is isolated from user data traffic, providing a secure way to manage network devices even if the main network is down or compromised.
Reference: CompTIA Network+ study materials.
A network administrator is deploying a new switch and wants to make sure that the default priority value was set for a spanning tree.
Which of the following values would the network administrator expect to see?
- A . 4096
- B . 8192
- C . 32768
- D . 36684
C
Explanation:
Understanding Spanning Tree Protocol (STP):
STP is used to prevent network loops in Ethernet networks by creating a spanning tree that selectively blocks some redundant paths.
Default Priority Value:
Bridge Priority: STP uses bridge priority to determine which switch becomes the root bridge. The default bridge priority value for most switches is 32768.
Priority Range: The bridge priority can be set in increments of 4096, ranging from 0 to 61440.
Configuration and Verification:
When deploying a new switch, the network administrator can verify the bridge priority using commands such as show spanning-tree to ensure it is set to the default value of 32768. Comparison with Other Values:
4096 and 8192: Lower than the default priority, indicating these would be manually configured for higher preference.
36684: A non-standard value, likely a result of specific configuration changes.
Reference: CompTIA Network+ study materials on Spanning Tree Protocol and network configuration.
Which of the following does a full-tunnel VPN provide?
- A . Lower bandwidth requirements
- B . The ability to reset local computer passwords
- C . Corporate Inspection of all networktraffic
- D . Access to blocked sites
C
Explanation:
A full-tunnel VPN routes all of a user’s network traffic through the corporate network. This means that the organization can inspect all network traffic for security and compliance purposes, as all data is tunneled through the VPN, allowing for comprehensive monitoring and inspection.
Reference: CompTIA Network+ study materials.
A university is implementing a new campus wireless network. A network administrator needs to configure the network to support a large number of devices and high-bandwidth demands from students.
Which of the following wireless technologies should the administrator consider for this scenario?
- A . Bluetooth
- B . Wi-Fi 6E
- C . 5G
- D . LTE
B
Explanation:
Comprehensive and Detailed
Wi-Fi 6E is the best choice for high-density environments, as it provides higher speeds, more
capacity, and lower latency.
Reference: CompTIA Network+ (N10-009) Official Study Guide C Domain 1.6: Compare and contrast wireless technologies.
A university is implementing a new campus wireless network. A network administrator needs to configure the network to support a large number of devices and high-bandwidth demands from students.
Which of the following wireless technologies should the administrator consider for this scenario?
- A . Bluetooth
- B . Wi-Fi 6E
- C . 5G
- D . LTE
B
Explanation:
Comprehensive and Detailed
Wi-Fi 6E is the best choice for high-density environments, as it provides higher speeds, more
capacity, and lower latency.
Reference: CompTIA Network+ (N10-009) Official Study Guide C Domain 1.6: Compare and contrast wireless technologies.
Which of the following network topologies contains a direct connection between every node in the network?
- A . Mesh
- B . Hub-and-spoke
- C . Star
- D . Point-to-point
A
Explanation:
In a mesh topology, every node is directly connected to every other node. This provides high redundancy and reliability, as there are multiple paths for data to travel between nodes. This topology is often used in networks where high availability is crucial.
Reference: CompTIA Network+ study materials.
Newly crimped 26ft (8m) STP Cat 6 patch cables were recently installed in one room to replace cables that were damaged by a vacuum cleaner. Now, users in that room are unable to connect to the network. A network technician tests the existing cables first. The 177ft (54m) cable that runs from the core switch to the access switch on the floor is working, as is the 115ft (35m) cable run from the access switch to the wall jack in the office.
Which of the following is the most likely reason the users cannot connect to the network?
- A . Mixed UTP and STP cables are being used.
- B . The patch cables are not plenum rated.
- C . The cable distance is exceeded.
- D . An incorrect pinout on the patch cable is being used.
D
Explanation:
An incorrect pinout on the patch cable could prevent network connectivity due to mismatched wiring. Even if the cables are the correct length and type, a pinout issue can cause continuity problems and prevent data transmission. Proper crimping with the correct pinout is essential for network cables to function. (Reference: CompTIA Network+ Study Guide, Chapter on Network Media and Topologies)
A company discovers on video surveillance recordings that an unauthorized person installed a rogue access point in its secure facility.
Which of the following allowed the unauthorized person to do this?
- A . Evil twin
- B . Honeytrap
- C . Wardriving
- D . Tailgating
D
Explanation:
Tailgating is a physical security breach where someone follows an authorized person into a restricted area without proper credentials. Once inside, the attacker can install rogue devices like unauthorized APs.
Several users in an organization report connectivity issues and lag during a video meeting. The network administrator performs a tcpdump and observes increased retransmissions for other non-video applications on the network.
Which of the following symptoms describes the users’ reported issues?
- A . Latency
- B . Packet loss
- C . Bottlenecking
- D . Jitter
B
Explanation:
Packet loss occurs when network packets fail to reach their destination, leading to disruptions in connectivity and performance issues. In this scenario:
Users report connectivity issues and lag during video meetings.
The administrator detects increased retransmissions in tcpdump, which is a strong indicator of lost packets that must be resent.
Video meetings are particularly sensitive to packet loss, leading to buffering, frozen screens, and dropped calls.
Latency (Option A) refers to delayed data transmission but does not necessarily cause retransmissions.
Bottlenecking (Option C) happens when a network component (e.g., router, switch) cannot handle the traffic load, but packet retransmissions are more directly related to packet loss.
Jitter (Option D) affects the consistency of packet arrival times, but the symptoms described here are more aligned with packet loss rather than timing variations.
?
Reference: CompTIA Network+ (N10-009) Official Study Guide C Section: Troubleshooting Connectivity Issues
Several users in an organization report connectivity issues and lag during a video meeting. The network administrator performs a tcpdump and observes increased retransmissions for other non-video applications on the network.
Which of the following symptoms describes the users’ reported issues?
- A . Latency
- B . Packet loss
- C . Bottlenecking
- D . Jitter
B
Explanation:
Packet loss occurs when network packets fail to reach their destination, leading to disruptions in connectivity and performance issues. In this scenario:
Users report connectivity issues and lag during video meetings.
The administrator detects increased retransmissions in tcpdump, which is a strong indicator of lost packets that must be resent.
Video meetings are particularly sensitive to packet loss, leading to buffering, frozen screens, and dropped calls.
Latency (Option A) refers to delayed data transmission but does not necessarily cause retransmissions.
Bottlenecking (Option C) happens when a network component (e.g., router, switch) cannot handle the traffic load, but packet retransmissions are more directly related to packet loss.
Jitter (Option D) affects the consistency of packet arrival times, but the symptoms described here are more aligned with packet loss rather than timing variations.
?
Reference: CompTIA Network+ (N10-009) Official Study Guide C Section: Troubleshooting Connectivity Issues