Citrix 1Y0-241 Practice Exams
Last updated on Oct 21,2026- Exam Code: 1Y0-241
- Exam Name: Deploy and Manage Citrix ADC with Traffic Management
- Certification Provider: Citrix
- Latest update: Oct 21,2026
Scenario: A Citrix Administrator configured a Citrix ADC active-passive, high availability (HA) pair. The HA pair failed over and customers were unable to access hosted websites. The administrator troubleshoots and discovers that the upstream router is NOT updating its ARP table.
What can the administrator configure to resolve this issue?
- A . Independent Network Configuration (INC) mode
- B . Route monitor
- C . HA monitor
- D . Virtual MAC
A Citrix Administrator wants to configure independent and isolated access on a single appliance to allow three different departments to manage and isolate their own applications.
What can the administrator configure to isolate department-level administration?
- A . Admin partitions that use dedicated VLANs
- B . A SNIP in each partition, and bind a VLAN for the department
- C . Policy-based routes for each department in the nsroot partition
- D . Dedicated routes in the admin partitions for each department
How does Citrix ADC support GSLB (Global Server Load Balancing)?
- A . By providing DNS services
- B . Through direct server access
- C . By using single sign-on
- D . Through manual configuration only
Scenario: After deploying a Citrix ADC in production, a Citrix Administrator notices that client requests are NOT being evenly distributed among backend resources. The administrator wants to change from the default loadbalancing method to one that will help distribute the load more evenly.
Which load-balancing method would ensure that the server with the least amount of network utilization is receiving new connections?
- A . Least connection
- B . Least bandwidth
- C . Least response time
- D . Least packets
Scenario: A Citrix Administrator would like to grant access to a Junior Citrix Administrator on the Citrix ADC.
The administrator would like to grant full access to everything except the following:
Shell User configuration
Partition configuration
Which preexisting command policy would meet the needs of this scenario?
- A . Sysadmin
- B . Operator
- C . Network
- D . Superuser
Scenario: To receive data alerts for failures, a Citrix Administrator is configuring SNMP on the Citrix ADC. The administrator is confident that the manager, alarms and SNMP traps are configured correctly. The following week, there is a Citrix ADC-related outage and the administrator does NOT receive any alerts.
What could be the reason for this alert failure?
- A . The Citrix Web App Firewall is blocking the alerts from going out.
- B . The community name was NOT configured in the Citrix ADC SNMP trap destination settings.
- C . The Citrix ADC only has standard licensing.
- D . The Citrix ADC is configured for SNMP version 1.
The Citrix ADC SDX architecture allows instances to share ___________ and __________. (Choose the two correct options to complete the sentence.)
- A . memory
- B . a CPU
- C . a physical interface
- D . the kernel
Scenario:
POLICY 1:
add rewrite action ACT_1 corrupt_http_header Accept-Encoding
add rewrite policy POL_1 HTTP.REQ.IS_VALID ACT_1
POLICY 2:
add rewrite action ACT_2 insert_http_header Accept-Encoding “identity“ add rewrite policy POL_2 `HTTP.REQ.IS_VALID ` ACT_2
How can a Citrix Administrator successfully bind the above rewrite policies to the load-balancing vServer lb_vsrv so that POL_2 is evaluated after POL_1 is evaluated?
- A . bind lb vServer lb_vsrv -policyName POL_1 -priority 110 -gotoPriorityExpression NEXT -type REQUEST bind lb vServer lb_vsrv -policyName POL_2 -priority 100 -gotoPriorityExpression END -type REQUEST
- B . bind lb vServer lb_vsrv -policyName POL_1 -priority 90 -gotoPriorityExpression NEXT -type REQUEST bind lb vServer lb_vsrv -policyName POL_2 -priority 100 -gotoPriorityExpression END -type REQUEST
- C . bind lb vServer lb_vsrv -policyName POL_1 -priority 90 -gotoPriorityExpression END -type REQUEST bind lb vServer lb_vsrv -policyName POL_2 -priority 80 -gotoPriorityExpression NEXT -type REQUEST
- D . bind lb vServer lb_vsrv -policyName POL_1 -priority 90 -type REQUEST bind lb vServer lb_vsrv -policyName POL_2 -priority 100 -type REQUEST
Scenario: A Citrix ADC is configured with Interface 1/1 and bound to VLAN 40. A Citrix Administrator executed the below command:
> bind vlan 10 Cifnum 1/1
What is the result of executing this command on the Citrix ADC?
- A . Interface 1/1 is bound to VLAN 20, and native VLAN is 20.
- B . Interface 1/1 is bound to VLAN 20, and native VLAN is NOT changed.
- C . Interface 1/1 is bound to VLAN 20, and native VLAN is 40.
- D . Interface 1/1 is bound to VLAN 20, and native VLAN is 1.
Scenario: A company acquires three smaller companies which adds more than 1.500 employees to the organization. The current Citrix ADC appliance does NOT support adding that many users.
A Citrix Administrator needs to use a multi-tenant solution, giving each newly acquired company its own Citrix ADC for VPN access load balancing, and a minimum of 20 Gbps of throughput.
How can the administrator meet the needs of these newly acquired companies?
- A . Purchase a Citrix ADC CPX for each
- B . Install XenServer and configure a Citrix ADC VPX 3000 for each
- C . Purchase a Citrix ADC MPX appliance for each
- D . Purchase a Citrix ADC SDX appliance, and configure a Citrix ADC instance for each