Cisco 350-601 Practice Exams
Last updated on Nov 16,2026- Exam Code: 350-601
- Exam Name: Implementing and Operating Cisco Data Center Core Technologies (DCCOR)
- Certification Provider: Cisco
- Latest update: Nov 16,2026
What are two types of FC/FCoE oversubscription ratios? (Choose two.)
- A . server storage to end-node count
- B . port bandwidth to uplink bandwidth
- C . edge ISL bandwidth to core ISL bandwidth
- D . host bandwidth to storage bandwidth
- E . switch processing power to end-node processing power
Which configuration generates a syslog message when CPU utilization is higher than 60%?
- A . event manager applet HIGH-CPU
event snmp oid 1.3.6.1.4.1.9.9.109.1.1.1.1.6.1 get-type exact entry-op gt 60 poll-interval 5 action 1.0 syslog priority notifications msg "cpu high" - B . event manager applet HIGH-CPU
event snmp oid 1.3.6.1.4.1.9.9.109.1.1.1.1.6.1 get-type exact entry-op lt 60 poll-interval 5 action 1.0 syslog priority notifications msg "cpu high" - C . event manager applet HIGH-CPU
event snmp oid 1.3.6.1.4.1.9.9.109.1.1.1.1.6.1 get-type next entry-op gt 60 poll-interval 5 action 1.0 syslog priority notifications msg "cpu high" - D . event manager applet HIGH-CPU
event snmp oid 1.3.6.1.4.1.9.9.109.1.1.1.1.6.1 get-type next entry-op lt 60 poll-interval 5 action 1.0 syslog priority notifications msg "cpu high"
A network engineer must perform a backup and restore of the Cisco Nexus 5000 Series Switch configuration. The backup must be made to an external backup server. The only protocol permitted between the Cisco Nexus switch and the backup server is UDP. The backup must be used when the current working configuration of the switch gets corrupted.
Which set of steps must be taken to meet these requirements?
- A . 1 Perform a startup-config backup to an FTP server.
2 Copy startup-config in the boot flash to the running-config file - B . 1 Perform a running-config backup to an SFTP server
2 Copy backup-config from the SFTP server to the running-config file - C . 1 Perform a running-config backup to an SCP server
2 Copy running-config in the boot flash to the running-config file - D . 1 Perform a startup-config backup to a TFTP server
2 Copy backup-config from the backup server to the running-config file
Refer to the exhibit.
![]()
What is the outcome of this command when the ELPD is updated on a Cisco Nexus 9000 series switch?
- A . displays the compatibility of the EPLD upgrade and the image in the bootflash
- B . shows a simulated upgrade of the EPLD
- C . upgrades the EPLD on the switch disruptively
- D . displays the impact of the upgrade on the operation of the switch
A network engineer needs to upgrade the EPLDs of the fabric modules for a Cisco MDS director-class switch.
In which order are components reloaded during the process?
- A . one fabric module at the time
- B . all fabric modules followed by the entire switching platform
- C . all fabric modules in parallel
- D . one module and one supervisor at the time
A Cisco MDS 9000 Series Switch is configured for SAN Analytics and SAN Telemetry Streaming. An engineer must enable analytics for NVMe on interfaces in the range of fc1/1-12. Due to a large amount of traffic generated in the SAN environment, the data must be collected at regular intervals of 60 seconds from ports fc 1-12 and then for ports fc13-24 for the next 60 seconds. Ports in the range fc4/13-14 were already enabled for analytics.
Which set of commands must be used to meet these requirements?

- A . Option A
- B . Option B
- C . Option C
- D . Option D
An engineer must configure multiple EPGs on a single access port in a large Cisco ACI fabric without using VMM integration. The relevant access policies and tenant policies have been created. A single AAEP is used to configure the access port in the fabric.
Which two additional steps must be taken to complete the configuration? (Choose two.)
- A . A contract must be defined between the EPGs
- B . The EPGs must be linked to the correct physical domain
- C . The EPGs must link directly to the corresponding AAEP
- D . The corresponding bridge domains must be configured in legacy mode
- E . The EPGs must be configured as static ports
An engineer requires a solution to automate the configuration and deployment of remote network devices for a customer.
The engineer must keep these considerations in mind:
• The customer’s environment is based on industry-accepted standards and requires a solution that meets these standards.
• The security requirements mandate the use of a secure transport mechanism between the automation software and target devices such as SSH or TLS.
• The solution must be based on a human-readable and easy to parse format such as XML or JSON.
Which solution must be used to meet these requirements?
- A . SNMP
- B . REST API
- C . Ansible
- D . NETCONF
Which server policy is used to install new Cisco IMC software on a server?
- A . host firmware policy
- B . hypervisor firmware policy
- C . BIOS software policy
- D . Cisco IMC software policy
Refer to Exhibit:

An engineer must use the python module in the guest shell of the Cisco Nexus 9000 Series switch to shutdown port Ethernet 1/4.
Which command set will accomplish this?

- A . Option A
- B . Option B
- C . Option C
- D . Option D