Cisco 300-810 Practice Exams
Last updated on Nov 16,2026- Exam Code: 300-810
- Exam Name: Implementing Cisco Collaboration Applications (CLICA)
- Certification Provider: Cisco
- Latest update: Nov 16,2026
An engineer Is assisting a user who Is reporting Jabber Presence Issues. Whenever the user Is on an active call, Cisco Jabber does not show the user as active when on a call. However, the user can set the presence status manually, and that status shows correctly.
Which action resolves the issue?
- A . Assign the user to a different Presence Redundancy Group.
- B . Restart the XCP Router service.
- C . Set the Owner ID on the users desk phone.
- D . Associate the user to the line on the Directory Number Configuration page.
A collaboration engineer is configuring LDAP integration for Cisco Unity Connection. The engineer has enabled the appropriate services and has completed the LDAP setup and LDAP directory configuration administrative pages in Cisco Unity Connection. The engineer has also completed a Full LDAP synchronization.
What must the engineer do next to have the LDAP users appear in the Unity Connection Users page?
- A . Configure the LDAP authentication settings under LDAP. LDAP Authentication.
- B . Synchronize the user accounts under Users – Synch Users.
- C . Restart the Cisco DirSync service.
- D . Import the user accounts under Users – Import Users.
Refer to Exhibit.

- A . Start all critical services on the second node, and select the Fallback button in the “Presence Redundancy Group Configuration”
- B . Go to “Presence Redundancy Group Configuration” on the Cisco UCM Administration page and select the Fallback button.
- C . Start all critical services on both nodes and select “rebalance users” in the “Presence User Assignment”
- D . Go to “Presence User Agreement” on the Cisco UCM Administration page and select “rebalance users” for all users.
What prevents toll fraud on voicemail ports?
- A . IP address trusted list on the PSTN gateway
- B . CSS
- C . Block OffNet to OffNet Transfer service parameter
- D . FAC
B
Explanation:
Reference: https://www.cisco.com/c/en/us/support/docs/unified-communications/unity-connection/119337-technote-cuc-00.html
What are two authentication mechanisms for identity provider authentication? (Choose two.)
- A . UID
- B . PKI/CAC
- C . ACS
- D . Password only
- E . Kerberos
When trying to send a call out of Cisco Unity Connection, what happens when enabling the transfer to an alternate contact number, located under caller input?
- A . The restriction table is checked when an administrator changes the extension number via the Cisco Unity Connection admin page.
- B . The restriction table is not checked when an administrator changes the extension number via the Cisco Unity Connection admin page.
- C . The restriction table is not checked when a user changes the extension number via a TUI conversation.
- D . The restriction table is not checked when a user changes extension number via the Cisco Unity Connection Cisco PCA page.
B
Explanation:
Reference: https://www.cisco.com/c/en/us/support/docs/unified-communications/unity-connection/117559-probsol-transferfailure-00.html
Refer to the exhibit

Users complain that the message waiting light on the IP phone does not light up when receiving a new voicemail.
With which codec must the engineer configure a dial peer on Cisco UCME for MW1 traffic to resolve this issue?
- A . G.729r8
- B . G.729ar8
- C . G.711ulaw
- D . G.711alaw
After integrating Cisco Unity Express with Cisco Unified Communications Manager Express, users report that the system does not respond to their digit presses.
Which two configuration snippets resolve this issue? (Choose two.)
- A . dial-peer voice 6800 voip
destination-pattern 5…
session protocol sipv2
session target ipv4:10.3.6.127
dtmf-relay sip-kpml
codec g729r8 - B . dial-peer voice 6800 voip
destination-pattern 5…
session protocol sipv2
session target ipv4:10.3.6.127
dtmf-relay sip-notify
codec g711ulaw - C . dial-peer voice 6800 voip
destination-pattern 5…
session protocol sipv2
session target ipv4:10.3.6.127
dtmf-relay rtp-nte
codec g711ulaw - D . dial-peer voice 6800 voip
destination-pattern 5…
session protocol sipv2
session target ipv4:10.3.6.127
dtmf-relay sip-kpml
codec g711ulaw - E . dial-peer voice 6800 voip
destination-pattern 5…
session protocol sipv2
session target ipv4:10.3.6.127
dtmf-relay sip-notify
codec g729r8
A user is experiencing video quality issues and wants to verify packet loss, jitter, and codecs in use.
Where can the user find this information in the Webex App for Windows during a call?
- A . Settings, Status, and press Diagnostics in the Webex App or Ctrl+Shit+Alt+S
- B . Settings, Health Checker, and press Diagnostics in the Webex App or Ctrl+Shit+Alt+D
- C . Help, Health Checker, and press Diagnostics in the Webex App or Ctrl+Shit+Alt+D
- D . Help, Health Checker, and press Status in the Webex App or Ctrl+Shit+Alt+S
Refer to the exhibit.

The associated directory number is configured with Call Forward All to voicemail in Cisco UCM. When users call the directory number they hear the opening greeting.
Which action should be taken to correct this issue?
- A . Modify the rule to a Forward Routing Rule.
- B . Modify the Calling Number to 3005.
- C . Modify the Dialed Number condition from "Equals" to "In".
- D . Modify the Call Forward All to the voicemail pilot.