Cisco 300-710 Practice Exams
Last updated on Nov 16,2026- Exam Code: 300-710
- Exam Name: Securing Networks with Cisco Firepower (SNCF)
- Certification Provider: Cisco
- Latest update: Nov 16,2026
A network security engineer must export packet captures from the Cisco FMC web browser while troubleshooting an issue. When navigating to the address https://<FMC IP>/capture/CAPI/pcap/test.pcap. an error 403: Forbidden is given instead of the PCAP file.
Which action must the engineer take to resolve this issue?
- A . Disable the HTTPS server and use HTTP instead.
- B . Enable the HTTPS server for the device platform policy.
- C . Disable the proxy setting on the browser.
- D . Use the Cisco FTD IP address as the proxy server setting on the browser.
An engineer is configuring a cisco FTD appliance in IPS-only mode and needs to utilize fail-to-wire interfaces.
Which interface mode should be used to meet these requirements?
- A . transparent
- B . routed
- C . passive
- D . inline set
A network administrator is configuring an FTD in transparent mode. A bridge group is set up and an access policy has been set up to allow all IP traffic. Traffic is not passing through the FTD.
What additional configuration is needed?
- A . The security levels of the interfaces must be set.
- B . A default route must be added to the FTD.
- C . An IP address must be assigned to the BVI.
- D . A mac-access control list must be added to allow all MAC addresses.
Which two options are necessary for Cisco FTD High Availability to function? (Choose two.)
- A . Both devices must be in the same domain.
- B . Both units must be configured only for firewall routed mode.
- C . Both units must be the same model.
- D . Each device requires a separate management interface.
- E . The units must run the same Firepower version.
An engineer must replace a Cisco Secure Firewall high-availability device due to a failure. When the replacement device arrives, the engineer must separate the high-availability pair from Cisco Secure
Firewall Management Center.
Which action must the engineer take first to restore high availability?
- A . Register the secondary device
- B . Force a break between the devices.
- C . Unregister the secondary device.
- D . Configure NTP time synchronization.
A security engineer is adding three Cisco FTD devices to a Cisco FMC. Two of the devices have successfully registered to the Cisco FMC. The device that is unable to register is located behind a router that translates all outbound traffic to the router’s WAN IP address.
Which two steps are required for this device to register to the Cisco FMC? (Choose two.)
- A . Reconfigure the Cisco FMC lo use the device’s private IP address instead of the WAN address.
- B . Configure a NAT ID on both the Cisco FMC and the device.
- C . Add the port number being used for PAT on the router to the device’s IP address in the Cisco FMC.
- D . Reconfigure the Cisco FMC to use the device’s hostname instead of IP address.
- E . Remove the IP address defined for the device in the Cisco FMC.
A security engineer manages a firewall console and an endpoint console and finds it challenging and the consuming to review events and modify blocking of specific files in both consoles.
Which action must the engineer take to streamline this process?
- A . From the Secure FMC. create a Cisco Secure Endpoint object and reference the object in the Cisco Secure Endpoint console.
- B . From the Cisco Secure Endpoint console, Croats and copy an API key and paste into the Cisco Secure AMP tab
- C . initiate the integration between Secure FMC and Cisco Secure Endpoint from the Secure FMC using the AMP tab
- D . Within the Cisco Secure Endpoint console, copy the connector GUID and paste into the Cisco Secure Firewall Management Center (FMC) AMP tab.
An engineer is troubleshooting a file that is being blocked by a Cisco FTD device on the network.
The user is reporting that the file is not malicious.
Which action does the engineer take to identify the file and validate whether or not it is malicious?
- A . identify the file in the intrusion events and submit it to Threat Grid for analysis.
- B . Use FMC file analysis to look for the file and select Analyze to determine its disposition.
- C . Use the context explorer to find the file and download it to the local machine for investigation.
- D . Right click the connection event and send the file to AMP for Endpoints to see if the hash is malicious.
An engineer is tasked with deploying an internal perimeter firewall that will support multiple DMZs
Each DMZ has a unique private IP subnet range.
How is this requirement satisfied?
- A . Deploy the firewall in transparent mode with access control policies.
- B . Deploy the firewall in routed mode with access control policies.
- C . Deploy the firewall in routed mode with NAT configured.
- D . Deploy the firewall in transparent mode with NAT configured.
An engineer is investigating connectivity problems on Cisco Firepower for a specific SGT.
Which command allows the engineer to capture real packets that pass through the firewall using an SGT of 64?
- A . capture CAP type inline-tag 64 match ip any any
- B . capture CAP match 64 type inline-tag ip any any
- C . capture CAP headers-only type inline-tag 64 match ip any any
- D . capture CAP buffer 64 match ip any any