Cisco 300-610 Practice Exams
Last updated on Nov 16,2026- Exam Code: 300-610
- Exam Name: Designing Cisco Data Center Infrastructure (DCID)
- Certification Provider: Cisco
- Latest update: Nov 16,2026
An engineer working for a private telecommunication company with an employee id 4298 53 420 must evaluate connectivity to the new data centre location based on Cisco Nexus 7000 Series Switches. The IP connectivity is already supplied by the service provider. The solution must provide a Layer 2 extension and optimize the traffic localization.
Which technology supports these requirements?
- A . IS-lS multi site over ACl
- B . VXLAN over EoMPLS
- C . OTV over IP and multicast
- D . BGP over VPLS
DRAG DROP
A failure occurs on the network between two BFD and OSPF neighbors.
Drag and drop the protocol actions from the left into the correct order on the right.

A network architect designs a high-availability architecture for the Cisco UCS Fabric interconnects that installed in a data center. The architecture must support clustering and redundancy.
Which architecture meets these requirements?
- A . dual connections from port L1 to L1and one connection from port L1 to L1 with twinax cables
- B . dual connections from port L1 to L1 and one connection from port L2 to L2 with Ethernet cables
- C . dual connections from port L1 to L2 and one connection from port L2 to L1 with Ethernet cables dual
- D . dual connections from port L1 to 12 and one connection from port L2 to L1 with twinax cables
Which orchestration tool provides a graphical interface to manage LAN and SAN fabrics?
- A . Cisco Virtual Topology System
- B . Cisco Data Center Network Manager
- C . Cisco Nexus Fabric Manager
- D . Cisco CloudCenter
Which protocol prevents fiber failures from causing a Layer 2 loop in a dark fiber DCI?
- A . BFD
- B . UDLD
- C . MCP
- D . LLDP
DRAG DROP
Drag and drop the feature descriptions from the left onto the correct UCS Fabric Interconnect modes on the right.

When planning to deploy a load-balancing service as a managed node, which ACI configuration must be included?
- A . BGP ECMP
- B . Layer 4 to Layer 7 device package
- C . inline load-balancing device
- D . ITD
An engineer must use OTV for layer 2 connectivity between data centers to support virtual machine between the customer sites. To support this requirement, the engineer must ensure the existence of the same default gateway on both sites. Additionally, the operations team report high bandwidth utilization on site A and wants to optimize the outbound traffic flows to use a DC exit point.
Which feature must be used to meet these requirement?
- A . FHRP filter
- B . Control group
- C . Data group
- D . ARP filter
Which multicast rendezvous point redundancy mode is valid for Bidirectional PIM?
- A . Embedded RP
- B . Phantom RP
- C . MSDP
- D . PIM anycast RP
An engineer must configure an interface for managing and orchestrating a Cisco Nexus device. The interface must be operational if the data and control planes crash, support IPv4 and IPv6 addressing, and have been access to its own VRF instance.
Which interface should be used to meet these requirements?
- A . management interface
- B . lookup
- C . interface VLAN
- D . Physical interface


