Cisco 300-415 Practice Exams
Last updated on Nov 16,2026- Exam Code: 300-415
- Exam Name: Implementing Cisco SD-WAN Solutions (ENSDWI)
- Certification Provider: Cisco
- Latest update: Nov 16,2026
DRAG DROP
Drag and drop the policies from the left onto the correct policy types on the right.


When redistribution is configured between OMP and BGP at two Data Center sites that have Direct Connection interlink, which step avoids learning the same routes on WAN Edge routers of the DCs from LAN?
- A . Define different VRFs on both DCs
- B . Set same overlay AS on both DC WAN Edge routers
- C . Set down-bit on Edge routers on DC1
- D . Set OMP admin distance lower than BGP admin distance
B
Explanation:

Which two metrics must a cloud Edge router use to pick the optimal path for a SaaS application reachable via a gateway site? (Choose two.)
- A . HTTP loss and latency metrics to the SaaS application
- B . ICMP loss and latency metrics to the SaaS application
- C . BFD loss and latency metrics to the gateway site
- D . BFD loss and latency metrics to the SaaS application
- E . HTTP loss and latency metrics to the gateway site
A, C
Explanation:
-The gateway vEdge uses HTTP to obtain SaaS application performance information – The client vEdge will use BFD over the IPSec tunnel to the gateway site to obtain client>gateway path performance information
https://www.cisco.com/c/dam/en/us/td/docs/solutions/CVD/SDWAN/CVD-SD-WAN-Cloud-onRamp-for-SaaS-Deployment-Guide-2018JUL.pdf
Which two metrics must a cloud Edge router use to pick the optimal path for a SaaS application reachable via a gateway site? (Choose two.)
- A . HTTP loss and latency metrics to the SaaS application
- B . ICMP loss and latency metrics to the SaaS application
- C . BFD loss and latency metrics to the gateway site
- D . BFD loss and latency metrics to the SaaS application
- E . HTTP loss and latency metrics to the gateway site
A, C
Explanation:
-The gateway vEdge uses HTTP to obtain SaaS application performance information – The client vEdge will use BFD over the IPSec tunnel to the gateway site to obtain client>gateway path performance information
https://www.cisco.com/c/dam/en/us/td/docs/solutions/CVD/SDWAN/CVD-SD-WAN-Cloud-onRamp-for-SaaS-Deployment-Guide-2018JUL.pdf
Which action is performed during the onboarding process when a WAN Edge router is connected to ZTP server ztp.viptela com?
- A . The router is connected to WAN Edge Cloud Center
- B . The router is synced with vSmart Controller via an IPsec tunnel
- C . The router receives its vBond Orchestrator information
- D . The router is connected 10 vSmart Controller via a DTLSTLS tunnel
Which action is performed during the onboarding process when a WAN Edge router is connected to ZTP server ztp.viptela com?
- A . The router is connected to WAN Edge Cloud Center
- B . The router is synced with vSmart Controller via an IPsec tunnel
- C . The router receives its vBond Orchestrator information
- D . The router is connected 10 vSmart Controller via a DTLSTLS tunnel
Which action is performed during the onboarding process when a WAN Edge router is connected to ZTP server ztp.viptela com?
- A . The router is connected to WAN Edge Cloud Center
- B . The router is synced with vSmart Controller via an IPsec tunnel
- C . The router receives its vBond Orchestrator information
- D . The router is connected 10 vSmart Controller via a DTLSTLS tunnel
Which logs verify when a device was upgraded?
- A . Audit
- B . Email
- C . ACL
- D . SNMP
A
Explanation:
Reference: https://sdwan-
docs.cisco.com/Product_Documentation/vManage_Help/Release_18.4/Monitor/Audit_Log
Which two mechanisms are used by vManage to ensure that the certificate serial number of the WAN Edge router that is needed to authenticate is listed in the WAN Edge Authorized Señal Number Hst’ (Choose two)
- A . Synchronize to the PnP
- B . Manually upload it to vManage
- C . The devices register to vManage directly as the devices come online
- D . The vManage is shipped with the list
- E . Synchronize to the Smart Account
What are the two functions of vSmart? (Choose two)
- A . It orchestrates connectivity between WAN Edge routers using policies to create network topology
- B . It ensures that valid WAN Edge routers can build the control pane connectivity
- C . It uses TLOCs to uniquely identify the circuit interface to control plane and data plane information
- D . It validates that the WAN Edge trying to join the overlay is authorized to join.
- E . It builds control plane connections with WAN Edge routers using ILS or UILS