Check Point 156-315.81.20 Practice Exams
Last updated on Oct 23,2026- Exam Code: 156-315.81.20
- Exam Name: Check Point Certified Security Expert - R81.20
- Certification Provider: Check Point
- Latest update: Oct 23,2026
Question #421
John is using Management HA.
Which Smartcenter should be connected to for making changes?
- A . secondary Smartcenter
- B . active Smartenter
- C . connect virtual IP of Smartcenter HA
- D . primary Smartcenter
Correct Answer: B
B
Explanation:
Management HA is a feature that allows the Security Management server to have one or more backup Standby Security Management servers that are ready to take over in case of failure1. The Active Security Management server is the one that handles all the management operations, such as policy installation, object creation, configuration backup, etc. The Standby Security Management servers are synchronized with the Active Security Management server and store the same data, such as databases, certificates, CRLs, etc. The Standby Security Management servers can also perform some operations, such as fetching a Security Policy or retrieving a CRL1.
To make changes to the system, such as editing objects or policies, the administrator needs to connect to the Active Security Management server. This is because the Active Security Management
server is the only one that can modify the data and synchronize it with the Standby Security Management servers. The administrator can use SmartConsole to connect to the Active Security Management server by entering its IP address or hostname1. The administrator can also use SmartDashboard to connect to the Active Security Management server by selecting Policy > Management High Availability. This shows information about the Security Management server that includes its peers – displayed with the name, status and type of Security Management server1. The other options are incorrect because:
A) secondary Smartcenter: This is a synonym for a Standby Security Management server, which cannot be used to make changes to the system.
C) connect virtual IP of Smartcenter HA: This is not a valid option because there is no virtual IP for Smartcenter HA. Each Security Management server has its own IP address and hostname.
D) primary Smartcenter: This is a synonym for the Active Security Management server, but it is not
the correct term to use. The term primary implies that there is only one Active Security Management server, which is not true. The administrator can put the Active Security Management server on standby and promote a Standby Security Management server to active at any time1.
Reference: How to Configure Management HA
B
Explanation:
Management HA is a feature that allows the Security Management server to have one or more backup Standby Security Management servers that are ready to take over in case of failure1. The Active Security Management server is the one that handles all the management operations, such as policy installation, object creation, configuration backup, etc. The Standby Security Management servers are synchronized with the Active Security Management server and store the same data, such as databases, certificates, CRLs, etc. The Standby Security Management servers can also perform some operations, such as fetching a Security Policy or retrieving a CRL1.
To make changes to the system, such as editing objects or policies, the administrator needs to connect to the Active Security Management server. This is because the Active Security Management
server is the only one that can modify the data and synchronize it with the Standby Security Management servers. The administrator can use SmartConsole to connect to the Active Security Management server by entering its IP address or hostname1. The administrator can also use SmartDashboard to connect to the Active Security Management server by selecting Policy > Management High Availability. This shows information about the Security Management server that includes its peers – displayed with the name, status and type of Security Management server1. The other options are incorrect because:
A) secondary Smartcenter: This is a synonym for a Standby Security Management server, which cannot be used to make changes to the system.
C) connect virtual IP of Smartcenter HA: This is not a valid option because there is no virtual IP for Smartcenter HA. Each Security Management server has its own IP address and hostname.
D) primary Smartcenter: This is a synonym for the Active Security Management server, but it is not
the correct term to use. The term primary implies that there is only one Active Security Management server, which is not true. The administrator can put the Active Security Management server on standby and promote a Standby Security Management server to active at any time1.
Reference: How to Configure Management HA
Question #422
What is false regarding a Management HA environment?
- A . Only one Management Server should be active, while any others be in standby mode
- B . It is not necessary to establish SIC between the primary and secondary management server, since the latter gets the exact same copy of the management database from the prior.
- C . SmartConsole can connect to any management server in Readonly mode.
- D . Synchronization will occur automatically with each Publish event if the Standby servers are available.
Correct Answer: B
B
Explanation:
It is false that it is not necessary to establish SIC between the primary and secondary management server, since the latter gets the exact same copy of the management database from the prior. In fact, SIC is required between the primary and secondary management server for Management HA to work properly. SIC ensures secure communication between the management servers and allows the standby server to receive updates from the active server. Without SIC, the standby server will not be able to synchronize with the active server and will not be ready to take over in case of a failover.
Reference: Solved: Management HA – Check Point CheckMates, section “Synchronizing Active and Standby Servers”
CheckPoint Management Server R81 HA Configuration | Udemy, section “How to set it up in the PNET lab environment”
Check Point R81, section “Management High Availability”
B
Explanation:
It is false that it is not necessary to establish SIC between the primary and secondary management server, since the latter gets the exact same copy of the management database from the prior. In fact, SIC is required between the primary and secondary management server for Management HA to work properly. SIC ensures secure communication between the management servers and allows the standby server to receive updates from the active server. Without SIC, the standby server will not be able to synchronize with the active server and will not be ready to take over in case of a failover.
Reference: Solved: Management HA – Check Point CheckMates, section “Synchronizing Active and Standby Servers”
CheckPoint Management Server R81 HA Configuration | Udemy, section “How to set it up in the PNET lab environment”
Check Point R81, section “Management High Availability”
Question #423
Which of the completed statements is NOT true? The WebUI can be used to manage user accounts and:
- A . assign privileges to users.
- B . edit the home directory of the user.
- C . add users to your Gaia system.
- D . assign user rights to their home directory in the Security Management Server.
Correct Answer: D
D
Explanation:
The WebUI can be used to manage user accounts and assign privileges to users. It can also add users to your Gaia system and edit the home directory of the user. However, it cannot assign user rights to their home directory in the Security Management Server1.
Reference: Check Point Resource Library, page 3.
D
Explanation:
The WebUI can be used to manage user accounts and assign privileges to users. It can also add users to your Gaia system and edit the home directory of the user. However, it cannot assign user rights to their home directory in the Security Management Server1.
Reference: Check Point Resource Library, page 3.
Question #424
What is the command to see cluster status in cli expert mode?
- A . fw ctl stat
- B . clusterXL stat
- C . clusterXL status
- D . cphaprob stat
Correct Answer: D
D
Explanation:
To see the cluster status in CLI expert mode, you can use the command cphaprob stat. This command displays the status of the Check Point High Availability cluster. It provides information about the state of the cluster members, such as "Active," "Standby," or "Collision."
Reference: Check Point Certified Security Expert (CCSE) R81 documentation and learning resources.
D
Explanation:
To see the cluster status in CLI expert mode, you can use the command cphaprob stat. This command displays the status of the Check Point High Availability cluster. It provides information about the state of the cluster members, such as "Active," "Standby," or "Collision."
Reference: Check Point Certified Security Expert (CCSE) R81 documentation and learning resources.
Question #425
GAiA Software update packages can be imported and installed offline in situation where:
- A . Security Gateway with GAiA does NOT have SFTP access to Internet
- B . Security Gateway with GAiA does NOT have access to Internet.
- C . Security Gateway with GAiA does NOT have SSH access to Internet.
- D . The desired CPUSE package is ONLY available in the Check Point CLOUD.
Correct Answer: B
B
Explanation:
According to the Check Point website, GAiA Software update packages can be imported and installed offline in situation where the Security Gateway with GAiA does not have access to Internet. This allows you to manually download the packages from another device and transfer them to the Security Gateway using a USB drive or other media. The other situations are either not relevant or not possible.
Reference: Offline Software Updates
B
Explanation:
According to the Check Point website, GAiA Software update packages can be imported and installed offline in situation where the Security Gateway with GAiA does not have access to Internet. This allows you to manually download the packages from another device and transfer them to the Security Gateway using a USB drive or other media. The other situations are either not relevant or not possible.
Reference: Offline Software Updates
Question #426
SmartEvent has several components that function together to track security threats.
What is the function of the Correlation Unit as a component of this architecture?
- A . Analyzes each log entry as it arrives at the log server according to the Event Policy. When a threat pattern is identified, an event is forwarded to the SmartEvent Server.
- B . Correlates all the identified threats with the consolidation policy.
- C . Collects syslog data from third party devices and saves them to the database.
- D . Connects with the SmartEvent Client when generating threat reports.
Correct Answer: A
A
Explanation:
The Correlation Unit in SmartEvent architecture has the function of analyzing each log entry as it arrives at the log server according to the Event Policy. When it identifies a threat pattern, it forwards an event to the SmartEvent Server. This is an essential function in threat detection and analysis, as it helps in identifying and alerting about security threats based on the configured policies.
Option A correctly describes the function of the Correlation Unit, making it the verified answer.
Reference: Check Point Certified Security Expert (CCSE) R81 documentation and learning resources.
A
Explanation:
The Correlation Unit in SmartEvent architecture has the function of analyzing each log entry as it arrives at the log server according to the Event Policy. When it identifies a threat pattern, it forwards an event to the SmartEvent Server. This is an essential function in threat detection and analysis, as it helps in identifying and alerting about security threats based on the configured policies.
Option A correctly describes the function of the Correlation Unit, making it the verified answer.
Reference: Check Point Certified Security Expert (CCSE) R81 documentation and learning resources.
Question #427
Which feature is NOT provided by all Check Point Mobile Access solutions?
- A . Support for IPv6
- B . Granular access control
- C . Strong user authentication
- D . Secure connectivity
Correct Answer: A
A
Explanation:
The feature that is not provided by all Check Point Mobile Access solutions is support for IPv6. Check Point Mobile Access is a comprehensive solution that provides secure remote access to corporate applications and resources using various methods, such as SSL VPN, IPsec VPN, clientless VPN, and mobile VPN. However, not all of these methods support IPv6, which is the latest version of the Internet Protocol that uses 128-bit addresses. According to the Check Point Mobile Access R81 Administration Guide1, only the following Mobile Access methods support IPv6:
SSL Network Extender (SNX) – a thin client that enables remote users to connect securely to the corporate network using SSL/TLS VPN.
Mobile VPN – a full VPN client that enables remote users to connect securely to the corporate network using IPsec VPN.
Capsule Connect – a mobile VPN app for iOS and Android devices that enables remote users to connect securely to the corporate network using IPsec VPN. The following Mobile Access methods do not support IPv6:
Clientless VPN – a web-based method that enables remote users to access web applications and services using a web browser without installing any software on their devices.
Endpoint Security VPN – a full VPN client that enables remote users to connect securely to the corporate network using IPsec VPN and also provides endpoint security features such as firewall, anti-virus, anti-malware, etc.
Capsule Workspace – a mobile app for iOS and Android devices that enables remote users to access email, calendar, contacts, and corporate applications securely without requiring a VPN connection.
A
Explanation:
The feature that is not provided by all Check Point Mobile Access solutions is support for IPv6. Check Point Mobile Access is a comprehensive solution that provides secure remote access to corporate applications and resources using various methods, such as SSL VPN, IPsec VPN, clientless VPN, and mobile VPN. However, not all of these methods support IPv6, which is the latest version of the Internet Protocol that uses 128-bit addresses. According to the Check Point Mobile Access R81 Administration Guide1, only the following Mobile Access methods support IPv6:
SSL Network Extender (SNX) – a thin client that enables remote users to connect securely to the corporate network using SSL/TLS VPN.
Mobile VPN – a full VPN client that enables remote users to connect securely to the corporate network using IPsec VPN.
Capsule Connect – a mobile VPN app for iOS and Android devices that enables remote users to connect securely to the corporate network using IPsec VPN. The following Mobile Access methods do not support IPv6:
Clientless VPN – a web-based method that enables remote users to access web applications and services using a web browser without installing any software on their devices.
Endpoint Security VPN – a full VPN client that enables remote users to connect securely to the corporate network using IPsec VPN and also provides endpoint security features such as firewall, anti-virus, anti-malware, etc.
Capsule Workspace – a mobile app for iOS and Android devices that enables remote users to access email, calendar, contacts, and corporate applications securely without requiring a VPN connection.
Question #428
Which of the following processes pulls the application monitoring status from gateways?
- A . cpd
- B . cpwd
- C . cpm
- D . fwm
Correct Answer: A
A
Explanation:
The process that pulls the application monitoring status from gateways is cpd1. The cpd process is responsible for the communication between the Security Management Server and the Security Gateway2. It handles tasks such as policy installation, status reporting, logging, and synchronization2. The cpd process also monitors the application status of the Security Gateway, such as CPU, memory, disk space, and processes3. The cpd process sends this information to the Security Management Server, which displays it in SmartConsole and SmartView Monitor3.
Reference: How to troubleshoot issues with Check Point Application Control and URL Filtering blades
– Check Point Software, Processes and Daemons in Gaia OS – Check Point Software, Monitoring Device Status – Check Point Software
A
Explanation:
The process that pulls the application monitoring status from gateways is cpd1. The cpd process is responsible for the communication between the Security Management Server and the Security Gateway2. It handles tasks such as policy installation, status reporting, logging, and synchronization2. The cpd process also monitors the application status of the Security Gateway, such as CPU, memory, disk space, and processes3. The cpd process sends this information to the Security Management Server, which displays it in SmartConsole and SmartView Monitor3.
Reference: How to troubleshoot issues with Check Point Application Control and URL Filtering blades
– Check Point Software, Processes and Daemons in Gaia OS – Check Point Software, Monitoring Device Status – Check Point Software
Question #429
When deploying SandBlast, how would a Threat Emulation appliance benefit from the integration of ThreatCloud?
- A . ThreatCloud is a database-related application which is located on-premise to preserve privacy of company-related data
- B . ThreatCloud is a collaboration platform for all the CheckPoint customers to form a virtual cloud consisting of a combination of all on-premise private cloud environments
- C . ThreatCloud is a collaboration platform for Check Point customers to benefit from VMWare ESXi infrastructure which supports the Threat Emulation Appliances as virtual machines in the EMC Cloud
- D . ThreatCloud is a collaboration platform for all the Check Point customers to share information about malicious and benign files that all of the customers can benefit from as it makes emulation of known files unnecessary
Correct Answer: D
D
Explanation:
ThreatCloud is a collaboration platform for all the Check Point customers to share information about malicious and benign files that all of the customers can benefit from as it makes emulation of known files unnecessary. ThreatCloud is a cloud-based service that collects and analyzes threat intelligence from multiple sources, such as Check Point products, third-party vendors, open sources, and customers. ThreatCloud provides real-time updates and feeds to Check Point products, such as SandBlast, which is a solution that detects and prevents zero-day attacks by emulating files in a sandbox environment. By integrating with ThreatCloud, a Threat Emulation appliance can benefit from the shared information about malicious and benign files, and avoid emulating files that are already known to be safe or harmful. This can improve the performance and efficiency of the Threat Emulation appliance. The other options are either incorrect or not relevant to ThreatCloud or Threat Emulation.
D
Explanation:
ThreatCloud is a collaboration platform for all the Check Point customers to share information about malicious and benign files that all of the customers can benefit from as it makes emulation of known files unnecessary. ThreatCloud is a cloud-based service that collects and analyzes threat intelligence from multiple sources, such as Check Point products, third-party vendors, open sources, and customers. ThreatCloud provides real-time updates and feeds to Check Point products, such as SandBlast, which is a solution that detects and prevents zero-day attacks by emulating files in a sandbox environment. By integrating with ThreatCloud, a Threat Emulation appliance can benefit from the shared information about malicious and benign files, and avoid emulating files that are already known to be safe or harmful. This can improve the performance and efficiency of the Threat Emulation appliance. The other options are either incorrect or not relevant to ThreatCloud or Threat Emulation.
Question #430
In the Check Point Firewall Kernel Module, each Kernel is associated with a key, which specifies the type of traffic applicable to the chain module. For Wire Mode configuration, chain modules marked with ____________ will not apply.
- A . ffff
- B . 1
- C . 2
- D . 3
Correct Answer: B
B
Explanation:
In the Check Point Firewall Kernel Module, each kernel is associated with a key, which specifies the type of traffic applicable to the chain module. For Wire Mode configuration, chain modules marked with 1 will not apply, as they are related to NAT, VPN, or other features that are not supported in Wire Mode. Wire Mode is a mode of operation that allows transparent traffic forwarding without any inspection or modification by the firewall.
Reference: Check Point Security Expert R81 Course, Wire Mode Configuration Guide
B
Explanation:
In the Check Point Firewall Kernel Module, each kernel is associated with a key, which specifies the type of traffic applicable to the chain module. For Wire Mode configuration, chain modules marked with 1 will not apply, as they are related to NAT, VPN, or other features that are not supported in Wire Mode. Wire Mode is a mode of operation that allows transparent traffic forwarding without any inspection or modification by the firewall.
Reference: Check Point Security Expert R81 Course, Wire Mode Configuration Guide