Amazon ANS-C01 Practice Exams
Last updated on Nov 16,2026- Exam Code: ANS-C01
- Exam Name: Amazon AWS Certified Advanced Networking - Specialty
- Certification Provider: Amazon
- Latest update: Nov 16,2026
A company is using Amazon Route 53 Resolver DNS Firewall in a VPC to block all domains except domains that are on an approved list. The company is concerned that if DNS Firewall is unresponsive, resources in the VPC might be affected if the network cannot resolve any DNS queries. To maintain application service level agreements, the company needs DNS queries to continue to resolve even if Route 53 Resolver does not receive a response from DNS Firewall.
Which change should a network engineer implement to meet these requirements?
- A . Update the DNS Firewall VPC configuration to disable fail open for the VPC.
- B . Update the DNS Firewall VPC configuration to enable fail open for the VPC.
- C . Create a new DHCP options set with parameter dns_firewall_fail_open=false. Associate the new DHCP options set with the VPC.
- D . Create a new DHCP options set with parameter dns_firewall_fail_open=true. Associate the new DHCP options set with the VPC.
A company needs to manage Amazon EC2 instances through command line interfaces for Linux hosts and Windows hosts. The EC2 instances are deployed in an environment in which there is no route to the internet. The company must implement role-based access control for management of the instances. The company has a standalone on-premises environment.
Which approach will meet these requirements with the LEAST maintenance overhead?
- A . Set up an AWS Direct Connect connection between the on-premises environment and the VPC where the instances are deployed. Configure routing, security groups, and ACLs. Connect to the instances by using the Direct Connect connection.
- B . Deploy and configure AWS Systems Manager Agent (SSM Agent) on each instance. Deploy VPC endpoints for Systems Manager Session Manager. Connect to the instances by using Session Manager.
- C . Establish an AWS Site-to-Site VPN connection between the on-premises environment and the VPC where the instances are deployed. Configure routing, security groups, and ACLs. Connect to the instances by using the Site-to-Site VPN connection.
- D . Deploy an appliance to the VPC where the instances are deployed. Assign a public IP address to the appliance. Configure security groups and ACLs. Connect to the instances by using the appliance as an intermediary.
A company has a global network and is using transit gateways to connect AWS Regions together. The company finds that two Amazon EC2 instances in different Regions are unable to communicate with each other. A network engineer needs to troubleshoot this connectivity issue.
What should the network engineer do to meet this requirement?
- A . Use AWS Network Manager Route Analyzer to analyze routes in the transit gateway route tables and in the VPC route tables. Use VPC flow logs to analyze the IP traffic that security group rules and network ACL rules accept or reject in the VPC.
- B . Use AWS Network Manager Route Analyzer to analyze routes in the transit gateway route tables. Verify that the VPC route tables are correct. Use AWS Firewall Manager to analyze the IP traffic that security group rules and network ACL rules accept or reject in the VPC.
- C . Use AWS Network Manager Route Analyzer to analyze routes in the transit gateway route tables. Verify that the VPC route tables are correct. Use VPC flow logs to analyze the IP traffic that security group rules and network ACL rules accept or reject in the VPC.
- D . Use VPC Reachability Analyzer to analyze routes in the transit gateway route tables. Verify that the VPC route tables are correct. Use VPC flow logs to analyze the IP traffic that security group rules and network ACL rules accept or reject in the VPC.
C
Explanation:
Using AWS Network Manager Route Analyzer to analyze routes in the transit gateway route tables would enable identification of routing issues between VPCs and transit gateways1. Verifying that the VPC route tables are correct would enable identification of routing issues within a VPC. Using VPC flow logs to analyze the IP traffic that security group rules and network ACL rules accept or reject in the VPC would enable identification of traffic filtering issues within a VPC2. Additionally, using VPC Reachability Analyzer to analyze routes in the transit gateway route tables would enable identification of routing issues between transit gateways in different Regions. VPC Reachability Analyzer is a configuration analysis tool that enables connectivity testing between a source resource and a destination resource in your VPCs.
A company has a global network and is using transit gateways to connect AWS Regions together. The company finds that two Amazon EC2 instances in different Regions are unable to communicate with each other. A network engineer needs to troubleshoot this connectivity issue.
What should the network engineer do to meet this requirement?
- A . Use AWS Network Manager Route Analyzer to analyze routes in the transit gateway route tables and in the VPC route tables. Use VPC flow logs to analyze the IP traffic that security group rules and network ACL rules accept or reject in the VPC.
- B . Use AWS Network Manager Route Analyzer to analyze routes in the transit gateway route tables. Verify that the VPC route tables are correct. Use AWS Firewall Manager to analyze the IP traffic that security group rules and network ACL rules accept or reject in the VPC.
- C . Use AWS Network Manager Route Analyzer to analyze routes in the transit gateway route tables. Verify that the VPC route tables are correct. Use VPC flow logs to analyze the IP traffic that security group rules and network ACL rules accept or reject in the VPC.
- D . Use VPC Reachability Analyzer to analyze routes in the transit gateway route tables. Verify that the VPC route tables are correct. Use VPC flow logs to analyze the IP traffic that security group rules and network ACL rules accept or reject in the VPC.
C
Explanation:
Using AWS Network Manager Route Analyzer to analyze routes in the transit gateway route tables would enable identification of routing issues between VPCs and transit gateways1. Verifying that the VPC route tables are correct would enable identification of routing issues within a VPC. Using VPC flow logs to analyze the IP traffic that security group rules and network ACL rules accept or reject in the VPC would enable identification of traffic filtering issues within a VPC2. Additionally, using VPC Reachability Analyzer to analyze routes in the transit gateway route tables would enable identification of routing issues between transit gateways in different Regions. VPC Reachability Analyzer is a configuration analysis tool that enables connectivity testing between a source resource and a destination resource in your VPCs.
A company is building its website on AWS in a single VPC. The VPC has public subnets and private subnets in two Availability Zones. The website has static content such as images. The company is using Amazon S3 to store the content.
The company has deployed a fleet of Amazon EC2 instances as web servers in a private subnet. The EC2 instances are in an Auto Scaling group behind an Application Load Balancer. The EC2 instances will serve traffic, and they must pull content from an S3 bucket to render the webpages. The company is using AWS Direct Connect with a public VIF for on-premises connectivity to the S3 bucket.
A network engineer notices that traffic between the EC2 instances and Amazon S3 is routing through a NAT gateway. As traffic increases, the company’s costs are increasing. The network engineer needs to change the connectivity to reduce the NAT gateway costs that result from the traffic between the EC2 instances and Amazon S3.
Which solution will meet these requirements?
- A . Create a Direct Connect private VIF. Migrate the traffic from the public VIF to the private VIF.
- B . Create an AWS Site-to-Site VPN tunnel over the existing public VIF.
- C . Implement interface VPC endpoints for Amazon S3. Update the VPC route table.
- D . Implement gateway VPC endpoints for Amazon S3. Update the VPC route table.
A company needs to manage Amazon EC2 instances through command line interfaces for Linux hosts and Windows hosts. The EC2 instances are deployed in an environment in which there is
no route to the internet. The company must implement role-based access control for management of the instances. The company has a standalone on-premises environment.
Which approach will meet these requirements with the LEAST maintenance overhead?
- A . Set up an AWS Direct Connect connection between the on-premises environment and the VPC where the instances are deployed. Configure routing, security groups, and ACLs. Connect to the instances by using the Direct Connect connection.
- B . Deploy and configure AWS Systems Manager Agent (SSM Agent) on each instance. Deploy VPC endpoints for Systems Manager Session Manager. Connect to the instances by using Session Manager.
- C . Establish an AWS Site-to-Site VPN connection between the on-premises environment and the VPC where the instances are deployed. Configure routing, security groups, and ACLs. Connect to the instances by using the Site-to-Site VPN connection.
- D . Deploy an appliance to the VPC where the instances are deployed. Assign a public IP address to the appliance. Configure security groups and ACLs. Connect to the instances by using the appliance as an intermediary.
B
Explanation:
The correct approach is to use AWS Systems Manager Session Manager, which allows you to manage your EC2 instances through a secure and browser-based interface. By deploying and configuring SSM Agent on each instance, you can enable Session Manager to communicate with the instances. By deploying VPC endpoints for Session Manager, you can enable the instances to connect to the AWS service without requiring an internet gateway, NAT device, or VPN connection. You can also use IAM policies and SSM documents to implement role-based access control for managing the instances. This approach has the least maintenance overhead, as it does not require any additional infrastructure or configuration.
A network engineer has deployed an Amazon EC2 instance in a private subnet in a VPC. The VPC has no public subnet. The EC2 instance hosts application code that sends messages to an Amazon Simple Queue Service (Amazon SQS) queue. The subnet has the default network ACL with no modification applied. The EC2 instance has the default security group with no modification applied.
The SQS queue is not receiving messages.
Which of the following are possible causes of this problem? (Choose two.)
- A . The EC2 instance is not attached to an IAM role that allows write operations to Amazon SQS.
- B . The security group is blocking traffic to the IP address range used by Amazon SQS
- C . There is no interface VPC endpoint configured for Amazon SQS
- D . The network ACL is blocking return traffic from Amazon SQS
- E . There is no route configured in the subnet route table for the IP address range used by Amazon SQS
A retail company is running its service on AWS. The company’s architecture includes Application Load Balancers (ALBs) in public subnets. The ALB target groups are configured to send traffic to backend Amazon EC2 instances in private subnets. These backend EC2 instances can call externally hosted services over the internet by using a NAT gateway.
The company has noticed in its billing that NAT gateway usage has increased significantly.
A network engineer needs to find out the source of this increased usage.
Which options can the network engineer use to investigate the traffic through the NAT gateway? (Choose two.)
- A . Enable VPC flow logs on the NAT gateway’s elastic network interface. Publish the logs to a log group in Amazon CloudWatch Logs. Use CloudWatch Logs Insights to query and analyze the logs.
- B . Enable NAT gateway access logs. Publish the logs to a log group in Amazon CloudWatch Logs. Use CloudWatch Logs Insights to query and analyze the logs.
- C . Configure Traffic Mirroring on the NAT gateway’s elastic network interface. Send the traffic to an additional EC2 instance. Use tools such as tcpdump and Wireshark to query and analyze the mirrored traffic.
- D . Enable VPC flow logs on the NAT gateway’s elastic network interface. Publish the logs to an Amazon S3 bucket. Create a custom table for the S3 bucket in Amazon Athena to describe the log structure. Use Athena to query and analyze the logs.
- E . Enable NAT gateway access logs. Publish the logs to an Amazon S3 bucket. Create a custom table for the S3 bucket in Amazon Athena to describe the log structure. Use Athena to query and analyze the logs.
A,D
Explanation:
To investigate the increased usage of a NAT gateway in a VPC architecture with ALBs and backend EC2 instances, a network engineer can use the following options:
✑ Enable VPC flow logs on the NAT gateway’s elastic network interface and publish the logs to a log group in Amazon CloudWatch Logs. Use CloudWatch Logs Insights to query and analyze the logs. (Option A)
✑ Enable VPC flow logs on the NAT gateway’s elastic network interface and publish the logs to an Amazon S3 bucket. Create a custom table for the S3 bucket in Amazon Athena to describe the log structure and use Athena to query and analyze the logs. (Option D)
These options allow for detailed analysis of traffic through the NAT gateway to identify the source of increased usage.
An ecommerce company needs to Implement additional security controls on all its domain names that are hosted in Amazon Route 53. The company’s new policy requires data authentication and data integrity verification for all queries to the company’s domain names. The current Route 53 architecture has four public hosted zones.
A network engineer needs to implement DNS Security Extensions (DNSSEC) signing and validation on the hosted zones. The solution must include an alert capability.
Which combination of steps will meet these requirements? {Select THREE.)
- A . Enable DNSSEC signing for Route 53. Request that Route 53 create a Key-signing key (KSK) based on a customer managed key in AWS Key Management Service (AWS KMS).
- B . Enable DNSSEC signing for Route 53. Request that Route 53 create a zone-signing key (ZSK) based on a customer managed key in AWS Key Management Service (AWS KMS).
- C . Create a chain of trust for the hosted zones by adding a Delegation Signer (DS) record for each subdomain.
- D . Create a chain of trust for the hosted zones by adding a Delegation Signer (DS) record to the parent zone.
- E . Set up an Amazon CloudWatch alarm that provides an alert whenever a DNSSECInternalFailure error or DNSSECKeySigningKeysNeedingAction error is detected.
- F . Set up an AWS CloudTrail alarm that provides an alert whenever a DNSSECInternalFailure error or DNSSECKeySigningKeysNeedingAction error is detected.