Amazon ANS-C01 Practice Exams
Last updated on Nov 16,2026- Exam Code: ANS-C01
- Exam Name: Amazon AWS Certified Advanced Networking - Specialty
- Certification Provider: Amazon
- Latest update: Nov 16,2026
A company is planning to use Amazon S3 to archive financial data. The data is currently stored in an on-premises data center. The company uses AWS Direct Connect with a Direct Connect gateway and a transit gateway to connect to the on-premises data center. The data cannot be transported over the public internet and must be encrypted in transit.
Which solution will meet these requirements?
- A . Create a Direct Connect public VIF. Set up an IPsec VPN connection over the public VIF to access Amazon S3. Use HTTPS for communication.
- B . Create an IPsec VPN connection over the transit VIF. Create a VPC and attach the VPC to the transit gateway. In the VPC, provision an interface VPC endpoint for Amazon S3. Use HTTPS for communication.
- C . Create a VPC and attach the VPC to the transit gateway. In the VPC, provision an interface VPC endpoint for Amazon S3. Use HTTPS for communication.
- D . Create a Direct Connect public VIF. Set up an IPsec VPN connection over the public VIF to the transit gateway. Create an attachment for Amazon S3. Use HTTPS for communication.
A company hosts its IT infrastructure in an on-premises data center. The company wants to migrate the infrastructure to the AWS Cloud in phases. A network engineer wants to set up a 10 Gbps AWS Direct Connect dedicated connection between the on-premises data center and VPCs. The company’s network provider needs 3 months to provision the Direct Connect connection.
In the meantime, the network engineer implements a temporary solution by deploying an AWS Site-to-Site VPN connection that terminates to a virtual private gateway. The network engineer observes that the bandwidth of the Site-to-Site VPN connection is capped at 1.25 Gbps despite a powerful customer gateway device.
What should the network engineer do to improve the VPN connection bandwidth before the implementation of the Direct Connect connection?
- A . Contact AWS Support to request a bandwidth quota increase for the existing Site-to-Site VPN connection.
- B . Discuss the issue with the hardware vendor. Buy a bigger and more powerful customer gateway device that has faster encryption and decryption capabilities.
- C . Create several additional Site-to-Site VPN connections that terminate on the same virtual gateway. Configure equal-cost multi-path (ECMP) routing to use all the VPN connections simultaneously.
- D . Create a transit gateway. Attach the VPCs to the transit gateway. Create several additional Site-to-Site VPN connections that terminate on the transit gateway. Configure equal-cost multi-path (ECMP) routing to use all the VPN connections simultaneously.
Your security team implements a host-based firewall on all of your Amazon Elastic
Compute Cloud (EC2) instances to block all outgoing traffic. Exceptions must be requested for each specific requirement. Until you request a new rule, you cannot access the instance metadata service.
Which firewall rule should you request to be added to your instances to allow instance metadata access?
- A . Inbound; Protocol tcp; Source [Instance’s EIP]; Destination 169.254.169.254
- B . Inbound; Protocol tcp; Destination 169.254.169.254; Destination port 80
- C . Outbound; Protocol tcp; Destination 169.254.169.254; Destination port 80
- D . Outbound; Protocol tcp; Destination 169.254.169.254; Destination port 443
C
Explanation:
https://docs.aws.amazon.com/AWSEC2/latest/UserGuide/instancedata-data-retrieval.html
To view all categories of instance metadata from within a running instance, use the following URI. http://169.254.169.254/latest/meta-data/
A banking company has an application that must connect to specific public IP addresses from a VPC. A network engineer has configured routes in the route table that is associated with the application’s subnet to the required public IP addresses through an internet gateway.
The network engineer needs to set up email notifications that will alert the network engineer when a user adds a default route to the application subnet’s route table with the internet gateway as a target.
Which solution will meet these requirements with the LEAST implementation effort?
- A . Create an AWS Lambda function that reads the routes in the route table and sends an email notification. Configure the Lambda function to send an email notification if any route is configured with 0.0.0.0/0 or ::/0 CIDRs to the internet gateway. Configure the Lambda function to run every minute.
- B . Create an AWS Lambda function that will be invoked by an Amazon EC2 CreateRoute API call. Configure the Lambda function to send an email notification. Configure the Lambda function to send an email notification if any route is configured with 0.0.0.0/0 or ::/0 CIDRs to the internet gateway.
- C . Create AWS Config rules for the route table by using the internet-gateway-authorized-vpc-only managed rule. Create an Amazon EventBridge rule to match the AWS Config rule and to route to an Amazon Simple Notification Service (Amazon SNS) topic to send an email notification.
- D . Create an AWS Config rule for the route table by using the no-unrestricted-route-to-igw managed rule. Create an Amazon EventBridge rule to match the AWS Config rule and to route to an Amazon Simple Notification Service (Amazon SNS) topic to send an email notification.
A company is planning to create a service that requires encryption in transit. The traffic must not be decrypted between the client and the backend of the service. The company will implement the service by using the gRPC protocol over TCP port 443. The service will scale up to thousands of simultaneous connections. The backend of the service will be hosted on an Amazon Elastic Kubernetes Service (Amazon EKS) duster with the Kubernetes Cluster Autoscaler and the Horizontal Pod Autoscaler configured. The company needs to use mutual TLS for two-way authentication between the client and the backend.
Which solution will meet these requirements?
- A . Install the AWS Load Balancer Controller for Kubernetes. Using that controller, configure a Network Load Balancer with a TCP listener on port 443 to forward traffic to the IP addresses of the backend service Pods.
- B . Install the AWS Load Balancer Controller for Kubernetes. Using that controller, configure an Application Load Balancer with an HTTPS listener on port 443 to forward traffic to the IP addresses of the backend service Pods.
- C . Create a target group. Add the EKS managed node group’s Auto Scaling group as a target Create an Application Load Balancer with an HTTPS listener on port 443 to forward traffic to the target group.
- D . Create a target group. Add the EKS managed node group’s Auto Scaling group as a target. Create a Network Load Balancer with a TLS listener on port 443 to forward traffic to the target group.
A company has hundreds of VPCs on AWS. All the VPCs access the public endpoints of Amazon S3
and AWS Systems Manager through NAT gateways. All the traffic from the VPCs to Amazon S3 and Systems Manager travels through the NAT gateways. The company’s network engineer must centralize access to these services and must eliminate the need to use public endpoints.
Which solution will meet these requirements with the LEAST operational overhead?
- A . Create a central egress VPC that has private NAT gateways. Connect all the VPCs to the central egress VPC by using AWS Transit Gateway. Use the private NAT gateways to connect to Amazon S3 and Systems Manager by using private IP addresses.
- B . Create a central shared services VPC. In the central shared services VPC, create interface VPC endpoints for Amazon S3 and Systems Manager to access. Ensure that private DNS is turned off. Connect all the VPCs to the central shared services VPC by using AWS Transit Gateway. Create an Amazon Route 53 forwarding rule for each interface VPC endpoint. Associate the forwarding rules with all the VPCs. Forward DNS queries to the interface VPC endpoints in the shared services VPC.
- C . Create a central shared services VPIn the central shared services VPC, create interface VPC endpoints for Amazon S3 and Systems Manager to access. Ensure that private DNS is turned off. Connect all the VPCs to the central shared services VPC by using AWS Transit Gateway. Create an Amazon Route 53 private hosted zone with a full service endpoint name for Amazon S3 and Systems Manager. Associate the private hosted zones with all the VPCs. Create an alias record in each private hosted zone with the full AWS service endpoint pointing to the interface VPC endpoint in the shared services VPC.
- D . Create a central shared services VPC. In the central shared services VPC, create interface VPC endpoints for Amazon S3 and Systems Manager to access. Connect all the VPCs to the central shared services VPC by using AWS Transit Gateway. Ensure that private DNS is turned on for the interface VPC endpoints and that the transit gateway is created with DNS support turned on.
C
Explanation:
By creating interface VPC endpoints for Amazon S3 and AWS Systems Manager in a central shared services VPC, and connecting all VPCs to this central shared services VPC using AWS Transit Gateway, access to these services can be centralized without the need for public endpoints. Enabling private DNS for the interface VPC endpoints means that the AWS services can be accessed directly using their private domain names, without the need to modify DNS settings or create additional DNS forwarding rules. This approach simplifies configuration, reduces operational complexity, and ensures all traffic remains within AWS’s private network, enhancing security.
An online retail company is running a web application in the us-west-2 Region and serves consumers in the United States. The company plans to expand across several countries in Europe and wants to provide low latency for all its users.
The application needs to identify the users’ IP addresses and provide localized content based on the users’ geographic location. The application uses HTTP GET and POST methods for its functionality. The company also needs to develop a failover mechanism that works for GET and POST methods and is based on health checks. The failover must occur in less than 1 minute for all clients.
Which solution will meet these requirements?
- A . Configure a Network Load Balancer (NLB) for the application in each environment In the new AWS Regions. Create an AWS Global Accelerator accelerator that has endpoint groups that point to the NLBs in each Region.
- B . Configure an Application Load Balancer (ALB) for the application in each environment in the new AWS Regions. Create an AWS Global Accelerator accelerator that has endpoint groups that point to the ALBs in each Region.
- C . Configure an Application Load Balancer (ALB) for the application in each environment in the new
AWS Regions. Create Amazon Route 53 public hosted zones that have failover routing policies. - D . Configure a Network Load Balancer (NLB) for the application in each environment in the new AWS Regions. Create an Amazon CloudFront distribution. Configure an origin group with origin failover options.
A company wants to improve visibility into its AWS environment. The AWS environment consists of multiple VPCs that are connected to a transit gateway. The transit gateway connects to an on-premises data center through an AWS Direct Connect gateway and a pair of redundant Direct Connect connections that use transit VIFs. The company must receive notification each time a new route is advertised to AWS from on premises over Direct Connect.
What should a network engineer do to meet these requirements?
- A . Enable Amazon CloudWatch metrics on Direct Connect to track the received routes.
Configure a CloudWatch alarm to send notifications when routes change. - B . Onboard Transit Gateway Network Manager to Amazon CloudWatch Logs Insights. Use Amazon EventBridge (Amazon CloudWatch Events) to send notifications when routes change.
- C . Configure an AWS Lambda function to periodically check the routes on the Direct Connect gateway and to send notifications when routes change.
- D . Enable Amazon CloudWatch Logs on the transit VIFs to track the received routes.
Create a metric filter Set an alarm on the filter to send notifications when routes change.
A company has deployed a multi-VPC environment in the AWS Cloud. The company uses a transit gateway to connect all the VPCs together. In the past, the company has experienced a loss of connectivity between applications after changes to security groups, network ACLs. and route tables in a VPC. When these changes occur, the company wants to automatically verify that connectivity still exists between different resources in a single VPC.
Which solution will meet these requirements?
- A . Create a list of paths between different resources to check in VPC Reachability Analyzer. Create an Amazon EventBridge rule to monitor when a change is made and logged in Amazon CloudWatch. Configure the rule to invoke an AWS Lambda function to test the different paths in Reachability Analyzer.
- B . Create a list of paths between different resources to check in VPC Reachability Analyzer. Create an Amazon EventBridge rule to monitor when a change is made and logged in AWS CloudTrail. Configure the rule to invoke an AWS Lambda function to test the different paths in Reachability Analyzer.
- C . Create a list of paths to check in AWS Network Manager Route Analyzer. Create an Amazon EventBridge rule to monitor when a change is made and logged in Amazon CloudWatch. Configure the rule to invoke an AWS Lambda function to test the different paths in Route Analyzer.
- D . Create a list of paths to check in AWS Network Manager Route Analyzer. Create an Amazon EventBridge rule to monitor when a change is made and logged in AWS CloudTrail. Configure the rule to invoke an AWS Lambda function to test the different paths in Route Analyzer.
A network engineer is using AWS Direct Connect connections and MACsec to encrypt data from a corporate data center to the Direct Connect location. The network engineer learns that the MACsec secret key might have been compromised. The network engineer needs to update the connection with an uncompromised secure key.
Which solution will meet this requirement?
- A . Create a new MACsec secret key that uses an AWS Key Management Service (AWS KMS) AWS managed key. Associate the new pre-shared key, Connection Key Name (CKN). and Connectivity Association Key (CAK) with the connection.
- B . Create a new MACsec secret key that uses an AWS Key Management Service (AWS KMS) customer managed key. Associate the new pre-shared key, Connection Key Name (CKN). and Connectivity Association Key (CAK) with the connection.
- C . Modify the existing MACsec secret key. Re-associate the existing pre-shared key. Connection Key Name (CKN), and Connectivity Association Key (CAK) with the connection.
- D . Modify the existing MACsec secret key. Associate the new pre-shared key. Connection Key Name (CKN). and Connectivity Association Key (CAK) with the connection.