Amazon ANS-C01 Practice Exams
Last updated on Nov 16,2026- Exam Code: ANS-C01
- Exam Name: Amazon AWS Certified Advanced Networking - Specialty
- Certification Provider: Amazon
- Latest update: Nov 16,2026
A company has expanded its network to the AWS Cloud by using a hybrid architecture with multiple AWS accounts. The company has set up a shared AWS account for the connection to its on-premises data centers and the company offices. The workloads consist of private web-based services for internal use. These services run in different AWS accounts. Office-based employees consume these services by using a DNS name in an on-premises DNS zone that is named example.internal.
The process to register a new service that runs on AWS requires a manual and complicated change request to the internal DNS. The process involves many teams.
The company wants to update the DNS registration process by giving the service creators access that will allow them to register their DNS records. A network engineer must design a solution that will achieve this goal. The solution must maximize cost-effectiveness and must require the least possible number of configuration changes.
Which combination of steps should the network engineer take to meet these requirements? (Choose three.)
- A . Create a record for each service in its local private hosted zone (serviceA.account1.aws.example.internal). Provide this DNS record to the employees who need access.
- B . Create an Amazon Route 53 Resolver inbound endpoint in the shared account VPC. Create a conditional forwarder for a domain named aws.example.internal on the on-premises DNS servers. Set the forwarding IP addresses to the inbound endpoint’s IP addresses that were created.
- C . Create an Amazon Route 53 Resolver rule to forward any queries made to onprem.example.internal to the on-premises DNS servers.
- D . Create an Amazon Route 53 private hosted zone named aws.example.internal in the shared AWSaccount to resolve queries for this domain.
- E . Launch two Amazon EC2 instances in the shared AWS account. Install BIND on each instance. Create a DNS conditional forwarder on each BIND server to forward queries for each subdomain under aws.example.internal to the appropriate private hosted zone in each AWS account. Create a conditional forwarder for a domain named aws.example.internal on the on-premises DNS servers. Set the forwarding IP addresses to the IP addresses of the BIND servers.
- F . Create a private hosted zone in the shared AWS account for each account that runs the service. Configure the private hosted zone to contain aws.example.internal in the domain (account1.aws.example.internal). Associate the private hosted zone with the VPC that runs the service and the shared account VPC.
BDF
Explanation:
By creating a record for each service in its local private hosted zone, service creators can directly register their DNS records. This decentralizes DNS record management and empowers service creators.
Creating an Amazon Route 53 Resolver inbound endpoint in the shared account VPC will allow on-premises DNS servers to resolve DNS names in the shared AWS account and any associated accounts. By setting up a conditional forwarder, DNS queries for the aws.example.internal domain will be forwarded to this inbound endpoint.
Creating a private hosted zone for each service in the shared AWS account and associating these with the VPCs that run the services will provide the services with their own domain under the aws.example.internal domain. This allows DNS names to be managed on a per-service basis, which can simplify DNS record management.
A company has been using an outdated application layer protocol for communication among applications. The company decides not to use this protocol anymore and must migrate all applications to support a new protocol. The old protocol and the new protocol are TCP-based, but the protocols use different port numbers.
After several months of work, the company has migrated dozens of applications that run on Amazon EC2 instances and in containers. The company believes that all the applications have been migrated, but the company wants to verify this belief. A network engineer needs to verify that no application is still using the old protocol.
Which solution will meet these requirements without causing any downtime?
- A . Use Amazon Inspector and its Network Reachability rules package. Wait until the analysis has finished running to find out which EC2 instances are still listening to the old port.
- B . Enable Amazon GuardDuty. Use the graphical visualizations to filter for traffic that uses the port of the old protocol. Exclude all internet traffic to filter out occasions when the same port is used as an ephemeral port.
- C . Configure VPC flow logs to be delivered into an Amazon S3 bucket. Use Amazon Athena to query the data and to filter for the port number that is used by the old protocol.
- D . Inspect all security groups that are assigned to the EC2 instances that host the applications. Remove the port of the old protocol if that port is in the list of allowed ports. Verify that the applications are operating properly after the port is removed from the security groups.
C
Explanation:
Configuring VPC flow logs to be delivered into an Amazon S3 bucket would enable capture of information about the IP traffic going to and from network interfaces within the VPC3. Using Amazon Athena to query the data and to filter for the port number that is used by the old protocol would enable identification of applications that are still using the old protocol.
A network engineer is designing a hybrid architecture that uses a 1 Gbps AWS Direct Connect connection between the company’s data center and two AWS Regions: us-east-1 and eu-west-1. The VPCs in us-east-1 are connected by a transit gateway and need to access several on-premises databases. According to company policy, only one VPC in eu-west-1 can be connected to one on-premises server. The on-premises network segments the traffic between the databases and the server.
How should the network engineer set up the Direct Connect connection to meet these requirements?
- A . Create one hosted connection. Use a transit VIF to connect to the transit gateway in us-east-1. Use a private VIF to connect to the VPC in eu-west-1. Use one Direct. Connect gateway for both VIFs to route from the Direct Connect locations to the corresponding AWS Region along the path that has the lowest latency.
- B . Create one hosted connection. Use a transit VIF to connect to the transit gateway in us-east-1. Use a private VIF to connect to the VPC in eu-west-1. Use two Direct Connect gateways, one for each VIF, to route from the Direct Connect locations to the corresponding AWS Region along the path that has the lowest latency.
- C . Create one dedicated connection. Use a transit VIF to connect to the transit gateway in us-east-1. Use a private VIF to connect to the VPC in eu-west-1. Use one Direct Connect gateway for both VIFs to route from the Direct Connect locations to the corresponding AWS Region along the path that has the lowest latency.
- D . Create one dedicated connection. Use a transit VIF to connect to the transit gateway in us-east-1. Use a private VIF to connect to the VPC in eu-west-1. Use two Direct Connect gateways, one for each VIF, to route from the Direct Connect locations to the corresponding AWS Region along the path that has the lowest latency.
D
Explanation:
This solution meets the requirements of the company by using a single Direct Connect connection with two VIFs, one connected to the transit gateway in us-east-1 and the other connected to the VPC in eu-west-1. Two Direct Connect gateways are used, one for each VIF, to route traffic from the Direct Connect location to the corresponding AWS Region along the path that has the lowest latency. This setup ensures that traffic between the VPCs in us-east-1 and on-premises databases is routed through the transit gateway, while traffic between the VPC in eu-west-1 and the on-premises server is routed directly through the private VIF.
A network engineer needs to improve the network security of an existing AWS environment by adding an AWS Network Firewall firewall to control internet-bound traffic. The AWS environment consists of five VPCs. Each VPC has an internet gateway. NAT gateways, public Application Load Balancers (ALBs), and Amazon EC2 instances. The EC2 instances are deployed in private subnets. The architecture is deployed across two Availability Zones.
The network engineer must be able to configure rules for the public IP addresses in the environment, regardless of the direction of traffic. The network engineer must add the firewall by implementing a solution that minimizes changes to the existing production environment. The solution also must ensure high availability.
Which combination of steps should the network engineer take to meet these requirements? (Select TWO.)
- A . Create a centralized inspection VPC with subnets in two Availability Zones. Deploy Network Firewall in this inspection VPC with an endpoint in each Availability Zone.
- B . Configure new subnets in two Availability Zones in each VPC. Deploy Network Firewall in each VPC with an endpoint in each Availability Zone.
- C . Deploy Network Firewall in each VPC. Use existing subnets in each of the two Availability Zones to deploy Network Firewall endpoints.
- D . Update the route tables that are associated with the private subnets that host the EC2 instances.
Add routes to the Network Firewall endpoints. - E . Update the route tables that are associated with the public subnets that host the NAT gateways and the ALBs. Add routes to the Network Firewall endpoints.
A company has an AWS Direct Connect connection between its on-premises data center in the United States (US) and workloads in the us-east-1 Region. The connection uses a transit VIF to connect the data center to a transit gateway in us-east-1.
The company is opening a new office in Europe with a new on-premises data center in England. A Direct Connect connection will connect the new data center with some workloads that are running in a single VPC in the eu-west-2 Region. The company needs to connect the US data center and us-east-1 with the Europe data center and eu-west-2. A network engineer must establish full connectivity between the data centers and Regions with the lowest possible latency.
How should the network engineer design the network architecture to meet these requirements?
- A . Connect the VPC in eu-west-2 with the Europe data center by using a Direct Connect gateway and a private VIF. Associate the transit gateway in us-east-1 with the same Direct Connect gateway. Enable SiteLink for the transit VIF and the private VIF.
- B . Connect the VPC in eu-west-2 to a new transit gateway. Connect the Europe data center to the new transit gateway by using a Direct Connect gateway and a new transit VIF. Associate the transit gateway in us-east-1 with the same Direct Connect gateway. Enable SiteLink for both transit VIFs. Peer the two transit gateways.
- C . Connect the VPC in eu-west-2 to a new transit gateway. Connect the Europe data center to the new transit gateway by using a Direct Connect gateway and a new transit VIF. Create a new Direct Connect gateway. Associate the transit gateway in us-east-1 with the new Direct Connect gateway. Enable SiteLink for both transit VIFs. Peer the two transit gateways.
- D . Connect the VPC in eu-west-2 with the Europe data center by using a Direct Connect gateway and a private VIF. Create a new Direct Connect gateway. Associate the transit gateway in us-east-1 with the new Direct Connect gateway. Enable SiteLink for the transit VIF and the private VIF.
Your organization has a newly installed 1-Gbps AWS Direct Connect connection. You order the cross-connect from the Direct Connect location provider to the port on your router in the same facility. To enable the use of your first virtual interface, your router must be configured appropriately.
What are the minimum requirements for your router?
- A . 1-Gbps Multi Mode Fiber Interface, 802.1Q VLAN, Peer IP Address, BGP Session with MD5.
- B . 1-Gbps Single Mode Fiber Interface, 802.1Q VLAN, Peer IP Address, BGP Session with MD5.
- C . IPsec Parameters, Pre-Shared key, Peer IP Address, BGP Session with MD5
- D . BGP Session with MD5, 802.1Q VLAN, Route-Map, Prefix List, IPsec encrypted GRE Tunnel
Your organization has a newly installed 1-Gbps AWS Direct Connect connection. You order the cross-connect from the Direct Connect location provider to the port on your router in the same facility. To enable the use of your first virtual interface, your router must be configured appropriately.
What are the minimum requirements for your router?
- A . 1-Gbps Multi Mode Fiber Interface, 802.1Q VLAN, Peer IP Address, BGP Session with MD5.
- B . 1-Gbps Single Mode Fiber Interface, 802.1Q VLAN, Peer IP Address, BGP Session with MD5.
- C . IPsec Parameters, Pre-Shared key, Peer IP Address, BGP Session with MD5
- D . BGP Session with MD5, 802.1Q VLAN, Route-Map, Prefix List, IPsec encrypted GRE Tunnel
A company’s network engineer must implement a cloud-based networking environment for a network operations team to centrally manage. Other teams will use the environment. Each team must be able to deploy infrastructure to the environment and must be able to manage its own resources. The environment must feature IPv4 and IPv6 support and must provide internet connectivity in a dual-stack configuration.
The company has an organization in AWS Organizations that contains a workload account for the teams. The network engineer creates a new networking account in the organization.
Which combination of steps should the network engineer take next to meet the requirements? (Select THREE.)
- A . Create a new VPC. Associate an IPv4 CIDR block of 10.0.0.0/16 and specify an IPv6 block of 2001: db8:c5a:6000::/56. Provision subnets by assigning /24 IPv4 CIDR blocks and /64 IPv6 CIDR blocks.
- B . Create a new VPC. Associate an IPv4 CIDR block of 10.0.0.0/16 and use an Amazon-provided IPv6 CIDR block. Provision subnets by assigning /24 IPv4 CIDR blocks and 164 IPv6 CIDR blocks.
- C . Enable sharing of resources within the organization by using AWS Resource Access Manager (AWS RAM). Create a resource share in the networking account, select the provisioned subnets, and share the provisioned subnets with the target workload account. Use the workload account to accept the resource share through AWS RAM.
- D . Enable sharing of resources within the organization by using AWS Resource Access Manager (AWS RAM). Create a resource share in the networking account, select the new VPC. and share the new VPC with the target workload account. Use the workload account to accept the resource share through AWS RAM.
- E . Create an internet gateway and an egress-only internet gateway. Deploy NAT gateways to the public subnets. Associate the internet gateway with the new VPC. Update the route tables. Associate the route tables with the relevant subnets.
- F . Create an internet gateway. Deploy NAT instances to public subnets. Update the route tables. Associate the route tables with the relevant subnets.
A network engineer needs to update a company’s hybrid network to support IPv6 for the upcoming release of a new application. The application is hosted in a VPC in the AWS Cloud. The company’s current AWS infrastructure includes VPCs that are connected by a transit gateway. The transit gateway is connected to the on-premises network by AWS Direct Connect and AWS Site-to-Site VPN. The company’s on-premises devices have been updated to support the new IPv6 requirements.
The company has enabled IPv6 for the existing VPC by assigning a new IPv6 CIDR block to the VPC and by assigning IPv6 to the subnets for dual-stack support. The company has launched new Amazon EC2 instances for the new application in the updated subnets.
When updating the hybrid network to support IPv6 the network engineer must avoid making any changes to the current infrastructure. The network engineer also must block direct
access to the instances’ new IPv6 addresses from the internet. However, the network engineer must allow outbound internet access from the instances.
What is the MOST operationally efficient solution that meets these requirements?
- A . Update the Direct Connect transit VIF and configure BGP peering with the AWS assigned IPv6 peering address. Create a new VPN connection that supports IPv6 connectivity. Add an egress-only internet gateway. Update any affected VPC security groups and route tables to provide connectivity within the VPC and between the VPC and the on-premises devices
- B . Update the Direct Connect transit VIF and configure BGP peering with the AWS assigned IPv6 peering address. Update the existing VPN connection to support IPv6 connectivity. Add an egress-only internet gateway. Update any affected VPC security groups and route tables to provide connectivity within the VPC and between the VPC and the on-premises devices.
- C . Create a Direct Connect transit VIF and configure BGP peering with the AWS assigned IPv6 peering address. Create a new VPN connection that supports IPv6 connectivity. Add an egress-only internet gateway. Update any affected VPC security groups and route tables to provide connectivity within the VPC and between the VPC and the on-premises devices.
- D . Create a Direct Connect transit VIF and configure BGP peering with the AWS assigned IPv6 peering address. Create a new VPN connection that supports IPv6 connectivity. Add a NAT gateway. Update any affected VPC security groups and route tables to provide connectivity within the VPC and between the VPC and the on-premises devices.
A company is planning to host external websites on AWS. The websites will include multiple tiers such as web servers, application logic services, and databases. The company wants to use AWS Network Firewall. AWS WAR and VPC security groups for network security.
The company must ensure that the Network Firewall firewalls are deployed appropriately within relevant VPCs. The company needs the ability to centrally manage policies that are deployed to Network Firewall and AWS WAF rules. The company also needs to allow application teams to manage their own security groups while ensuring that the security groups do not allow overly permissive access.
What is the MOST operationally efficient solution that meets these requirements?
- A . Define Network Firewall firewalls. AWS WAFv2 web ACLs. Network Firewall policies, and VPC security groups in code Use AWS CloudFormation to deploy the objects and Initial policies and rule groups. Use CloudFormation to update the AWS WAFv2 web ACLs. Network Firewall policies, and VPC security groups. Use Amazon GuardDuty to monitor for overly permissive rules.
- B . Define Network Firewall firewalls. AWS WAFv2 web ACLs. Network Firewall policies, and VPC security groups in code. Use the AWS Management Console or the AWS CLI to manage the AWS WAFv2 web ACLs. Network Firewall policies, and VPC security groups. Use Amazon GuardDuty to invoke an AWS Lambda function to evaluate the configured rules and remove any overly permissive rules.
- C . Deploy AWS WAFv2 IP sets and AWS WAFv2 web ACLs with AWS CloudFormation. Use AWS Firewall Manager to deploy Network Firewall firewalls and VPC security groups where required and to manage the AWS WAFv2 web ACLs, Network Firewall policies, and VPC security groups.
- D . Define Network Firewall firewalls. AWS WAFv2 web ACLs. Network Firewall policies, and VPC security groups in code. Use AWS CloudFormation to deploy the objects and initial policies and rule groups. Use AWS Firewall Manager to manage the AWS WAFv2 web ACLs. Network Firewall policies, and VPC security groups. Use Amazon GuardDuty to monitor for overly permissive rules.